VEVOR Deep Well Submersible Pump, 550W Output Power, 230V, 65 L/min Flow 210 ft Head, with 65.62 ft Cord External Control Box, Stainless Steel Water Pump, for Industrial Irrigation and Home Use, IP68

550W Output Power for High-Flow, High-Lift Water Delivery

Reliable water delivery starts with adequate power, and this pump consistently provides it. This deep well submersible water pump consumes 750W of input power and produces 550W of usable output. This unit has been designed to meet the rigors of demanding water supply applications where both flow volume and vertical lift are important. A maximum flow rate of 65 liters per minute provides high-volume delivery to multiple outlets simultaneously, and a maximum head of 210 feet (64 meters) pushes water from great depths to the surface without pressure loss.

The G1" discharge size provides a dependable, constant output that can be tied into standard irrigation lines, livestock watering systems, or residential supply systems. Whether pulling from a deep borehole, a well, or a natural water source, the pump maintains steady pressure and consistent flow over long periods of operation. This output capacity provides the performance margin needed to reliably meet peak demand for users who require a reliable water supply across large properties, agricultural applications, or multi-point distribution systems.

Deep Well Submersible Water Pump with 65 L/min Flow and 210 ft Head

The practical usability of any submersible pump is determined by its combined flow rate and lift capacity, and this deep well submersible water pump performs well in both respects. High-demand applications such as irrigating large crop areas, filling livestock troughs, or supplying water to multi-room residential systems are possible with a maximum flow rate of 65 L/min. The maximum head is 210 feet, so you can use the pump effectively even in deep wells that require large vertical distances.

It uses 230V AC, 50Hz, and fits into standard residential and agricultural electrical systems without requiring specialized power infrastructure. Its compact cylindrical shape, with dimensions of 39.37 x 3.19 x 3.19 in (1000 x 81 x 81 mm), allows installation into well casings with an internal diameter as small as the pump diameter + 0.39 in (10 mm). This makes it compatible with a broad spectrum of existing well configurations.

Reliable Performance with Pure Copper Motor and Overheat Protection

The core of the deep-well submersible water pump is a pure-copper wire motor. The motor is chosen for its good conductivity , thermal efficiency and long-term durability in comparison with aluminum wound . The electrical resistance of copper windings remains steady over long periods of operation. It also provides high power stability and minimal energy dissipation in continuous operation. It means a motor that will work reliably under sustained load, with no decrease in flow rate or pressure over time.

The incorporated overheat protection adds an extra level of operating safety. During extended periods of high-demand pumping or low water flow, motor temperatures may exceed safe limits, and the protection mechanism will intervene immediately to prevent thermal damage. This protection prolongs the motor's life and minimizes the risk of unexpected malfunctions during key irrigation cycles or peak-demand periods.

IP68 Waterproof Rating and Stainless Steel Build for Long-Term Durability

This VEVOR pump is designed to be permanently submerged and has an IP68 waterproof rating, the highest rating for continuous underwater use. This certification confirms that the unit is reliable for operation at depth without water ingress damaging internal components. It makes it suitable for permanent deep-well installation and surface water extraction from rivers, ponds, and reservoirs. The IP68 rating is not just a quality label; it is a requirement for any pump intended for long-term submersion.

The connection fittings and filtration mesh are made of stainless steel, which is highly corrosion-resistant. This is a vital feature for pumps used in mineral-rich or chemically variable water sources. The stainless filtration mesh also prevents debris, sediment, and particulate matter from entering the motor housing. It also protects internal components from abrasive wear. The pump weighs 26.46 lbs (12.0kg) and provides a good balance of structural durability and manageable installation weight while remaining robust. This pump is IP68-rated and constructed from stainless steel, so it will last for years of continuous use, even when completely submerged.

External Control Box for Simple Operation and Easy Maintenance

Routine operation and ongoing maintenance are greatly facilitated by the 65.62-foot (20 m) cord and dedicated external control box. All operational controls are located in the external control box at surface level and within easy reach, so no need to retrieve the pump from the well for routine adjustments or diagnostics. This arrangement reduces the time and effort required for maintenance checks and allows operators to monitor and adjust performance without disturbing the pump's installed position.

The external control box is a logical place to make electrical connections and house protective components, keeping the wiring tidy and within convenient reach above ground. This surface-level access allows operators to easily modify water supply configurations throughout seasonal changes without demanding physical labor. The long cord also allows for proper installation depth for the pump's 210-foot maximum head rating, so the control box will be at the surface in most typical deep-well applications without needing to add cable extensions.

Deep Well Submersible Water Pump for Irrigation, Livestock, and Home Use

The versatility of this deep well submersible water pump across application types is a key feature. It is also ideal for agricultural irrigation, livestock watering systems, residential water supply, river and pond extraction, and general water transfer applications. Its broad compatibility makes it a one-stop solution for properties that need to supply water for multiple uses simultaneously, minimizing the need for separate pumps for different applications.

We recommend installing a layer of gauze at the pump inlet for new well installations to prevent fine particles from newly drilled wells from entering the pump. The well casing should have an internal diameter at least 0.39 inches (10 mm) larger than the pump's 3.19-inch diameter to allow a proper fit during installation and sufficient water circulation around the motor housing. It is absolutely vital not to run the pump dry or at critically low water levels. Operating without proper water flow can damage the motor.