All

Customer Reviews

  • 4.7
  • 4.5
  • 4.6
  • 4.7
Frank Hauser Frank Hauser
Kraftvoll und leise
L?uft sehr ruhig und Kraftvoll. Wurde schnell geliefert und kam heil in Styropor und Schaumstoff verpackt an.Im Fu? sind vier Bohrungen mit Gewinde M6, sowie drei an der Stirnseite des Motors
0
Denis Denis
Alles gut
Super Artikel, guter Kundendienst
0
Ryan Baker Ryan Baker
DC Motor 24V Permanent Magnet Motor 350W
F_ meine DIY Projekte habe ich mir schon ?fters diese Getriebemotore gekauft und ich bin mit der Leistung und der Verarbeitung sehr zufrieden.Auch die Lieferung war sehr schnell bei mir.Da werde ich noch ?fters einkaufen!
0
Nico Nico
Articles de qualit
Tr_ bien, article de qualit.Bravo
0
Toni Macaroni Toni Macaroni
Powerful little motor/controller combo
Used this for a go-kart project and it's a great little motor for the job. Driving around for 10 minutes barely gets the motor warm, so it's got plenty of power for a go kart (can get my kart up to 25mph at top speed). It has good low end torque for a fast take-off, and even with an extra hundred pounds (my kid in the passenger seat) the motor barely noticed a difference and still had pretty much the same power. My setup is a 6:1 gear ratio (60 teeth on the wheel sprocket, 10 teeth on the motor sprocket).Connections were easy to make, and like others have said, the "electric lock" connector is what you should use to wire up an on/off switch. Reverse works well, but be aware that it does not go full speed just in reverse.If you are like me and needed to switch the direction of the motor (without using reverse), here are the instructions I found (from leafmotor blog) that worked for this motor/controller setup:For the 3 larger wires coming from the motor, you will want to wire them to the controller like this:Motor _ ControllerThick yellow wire _- Thick green wireThick green wire _- Thick yellow wireThick blue wire _ Thick blue wireFor the 5 smaller wires coming from the motor (hall effect sensor) you will want to wire them like this:Motor hall _ Controller hallThin yellow wire _ Thin yellow wireThin green wire _ Thin blue wireThin blue wire _ Thin green wireThin red wire _ Thin red wireThin black wire _ Thin black wireFor the hall effect wires, it's pretty easy to use a tiny flathead screwdriver and pop the connectors out of the harness and swap the blue and green wires.
0
jared jared
its pretty good
great kit for the price should probably get better bolts for the motor though
0
Dimkaa Dimkaa
Great install on razor mx650
Had installed 3 of them already on mx650 razor not much modification is needed only to remove motors 2 washers and put the bolts back on everything else is plug and play.
0
shannon payne (mr) shannon payne (mr)
Fast
Kit works awesome on razor electric dirtbike
0
David Johnston David Johnston
It is exactly what I ordered.
I got what I ordered and it works just fine
0
Encephalo Encephalo
Minimal adaptations to put on a Razor MX500
Fairly easy project to put this on a Razor MX500. It hits around 30 miles an hour with my 10 year old driving. Only gripe is that there does not seem to be a slow speed. Slowly twist the throttle, and about half-way, the motor suddenly engages and jerks fairly hard. The throttle allows 15 mph to 30 mph. Going less that 15 and my son needs to rev the throttle in bits. He is good at it and we are very happy with the conversion, but a nice, easy gradual throttle would be nice. If anyone has a fix for this issue, please let me know.
0

People Who Bought This Item Also Bought

44-330-175-5511 Monday to Friday, 08:00-16:00, GMT+1 ©2009 - 2022 VEVOR All Rights Reserved