All
Account
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Report Incorrect Product Information
SLDJTZ3KW220VIBUEV2

Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet

€430.49
430.49
  • 【POWERFUL SPINDLE MOTOR】 - The water cooled spindle motor with upgraded four bearings adopts rust-proof materials and dynamic balance technology to reduce noise, wear and tear during the actual operation. And the one-time molding design features high concentricity & high precision for an excellent performance.
  • 【VARIABLE FREQUENCY DRIVE】 - This VFD driver has a single-phase input and 3 phase output. Control mode: V/F control and vector control. Frequency setting mode: digital setting, analog setting, serial communication setting, PID setting, etc. Various control techniques by both synchronization and non-synchronization dynamically realize fast starting without changing brakes. And the unique control mode attains high torque, high precision, full speed regulation drive, and can adapt to the poor power grid, temperature, humidity, and dust interference ability.
  • 【3.5M HIGH LIFT WATER PUMP】 - The submersible pump comes with a durable shell built with ASB plastic material. Its wear-resistant shaft and magnetic rotor facilitate 3.5 m high lifts and 3500L/H flows. With four powerful rubber suckers, the pump is shock absorption and noise reduction, not easy to fall off.
  • 【ALUMINUM CLAMP MOUNT】 - The clamp of the CNC spindle motor is constructed of high-quality cast aluminum for sturdiness and durability. And the well-finished surface is designed to provide a better smoothness. It is high-efficiency for you to fasten the spindle.
  • 【VERSATILE USE SCENARIOS】 - With ER20 collets, milling drill bits, aviation plugs, the extension cord, and the connecting wire, this VFD CNC spindle motor kit is widely applicable to engraving machine, lathes, mills, car hoists, pumps, conveyors, and many more.

Frequently Bought Together

People Who Bought This Item Also Bought

Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
3KW CNC Spindle Motor Kits
The CNC spindle motor kit comes with a premium spindle motor, variable frequency drive, aluminum spindle clamp for high-temperature resistance, low noise & low friction, and high speed. It is widely applicable to engraving machines for carving materials such as wood, stone, metal, etc.
  • Powerful Spindle Motor
  • Variable Frequency Drive
  • 3.5M High Lift Water Pump
  • Aluminum Clamp Mount

Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Tough Equipment & Tools, Pay Less
VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.
Why Choose VEVOR?
  • Premium Tough Quality
  • Incredibly Low Prices
  • Fast & Secure Delivery
  • 30-Day Free Returns
  • 24/7 Attentive Service
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Tough Equipment & Tools, Pay Less
VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.
Why Choose VEVOR?
  • Premium Tough Quality
  • Incredibly Low Prices
  • Fast & Secure Delivery
  • 30-Day Free Returns
  • 24/7 Attentive Service
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Water Cooled Spindle Motor
Unlike other spindle motors, ours use advanced dynamic balancing technology to achieve low noise, low friction, and long service life. Its durable surface, high-speed core, and four bearings significantly improve efficiency as an ideal tool for the engraving machine.
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
VFD Separate Operation Panel
The variable frequency drive is equipped with full-featured buttons and a detachable panel for quick operation and remote control. Reasonable layout and intuitive digital display increase the convenience of daily use for constant torque loads and variable torque loads.
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Multiple Control Terminals
The VFD inverter is rich in digital and analogy control terminals for versatile control. With 220V single phase input and 220V 3 phase output, the VFD is easy to connect with power and motor. And many preservation ways are adopted to ensure stable and reliable operation.
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Submersible Water Pump
The pump has the advantages of high lift, large flow rate, and excellent insulation. It should be wholly immersed in water to operate. We also provide you with water pipes to connect the water pump with the spindle motor effortlessly.
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Aluminum Spindle Clamp
The clamp with the finished surface is made of aluminum material, which is lightweight enough for you to install, disassemble, and use easily. After the fixing frame is aligned, you only need to turn the screws to the four corresponding holes to complete the installation.
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Complete Accessory Kit
For your convenience, we provide you with 14PCs ER20 collets of different diameters, 20 PCs milling drill bits, aviation plugs, VFD panel keypad extension cord, and connecting wire for use with engraving machines and frequency converters.
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Specifications
  • Model: 100 x 3KW
  • Spindle Motor
  • Power: 3KW
  • Voltage: 220V
  • Frequency: 400 Hz
  • Speed: 0-24000 RPM
  • Current: 10A
  • Collet Chuck: ER20
  • Cooling: Water Cooled
  • Accuracy: 0.002" / 0.05 mm
  • Runout Off: 0.002" / 0.05 mm
  • Bearings: 2 PCs 7003, 2 PCs 7005
  • Variable Frequency Drive
  • Power: 3.7 KW
  • Input Voltage: 220V
  • Output Voltage: 220V
  • Input Phase: 1 Phase
  • Output Phase: 3 Phase
  • Input Frequency: 50 Hz
  • Output Frequency: 0-400 Hz
  • Output Current: 17A
  • Water Pump
  • Voltage: 220V
  • Power: 80W
  • Flow Rate: 3500 L/H
  • Pump Lift: 11.48 ft / 3.5 m
  • Water Pipe
  • Length: 3.3 ft / 1 m
  • Spindle Clamp
  • Diameter: 3.15" / 80 mm
  • Material: Aluminum
  • ER20 Collets
  • Diameter: 1 mm, 2 mm, 3 mm, 3.175 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm
  • Outer Diameter: 0.83" / 21 mm
  • Height: 1.24" / 31.5 mm
  • CNC Router Bits
  • Shank Diameter: 0.125" / 3.175 mm
  • Cutting Degree: 10°, 15°, 20°, 30°
  • Tip: 0.004" / 0.1 mm
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Package Content
  • 1 x Water Cooled Spindle Motor
  • 1 x Variable Frequency Drive
  • 1 x Water Pump
  • 1 x Water Pipe
  • 1 x Spindle Clamp
  • 14 x ER20 Collets
  • 1 x Set of Mill Bits (20 PCs)
  • 2 x Aviation Plugs
  • 1 x VFD Panel Keypad Extension Cord
  • 1 x Connecting Wire
  • 1 x Manual
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet

Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Tough Equipment & Tools, Pay Less
VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.
Why Choose VEVOR?
  • Premium Tough Quality
  • Incredibly Low Prices
  • Fast & Secure Delivery
  • 30-Day Free Returns
  • 24/7 Attentive Service
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Tough Equipment & Tools, Pay Less
VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.
Why Choose VEVOR?
  • Premium Tough Quality
  • Incredibly Low Prices
  • Fast & Secure Delivery
  • 30-Day Free Returns
  • 24/7 Attentive Service
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
3KW CNC Spindle Motor Kits
The CNC spindle motor kit comes with a premium spindle motor, variable frequency drive, aluminum spindle clamp for high-temperature resistance, low noise & low friction, and high speed. It is widely applicable to engraving machines for carving materials such as wood, stone, metal, etc.
  • Powerful Spindle Motor
  • Variable Frequency Drive
  • 3.5M High Lift Water Pump
  • Aluminum Clamp Mount
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Water Cooled Spindle Motor
Unlike other spindle motors, ours use advanced dynamic balancing technology to achieve low noise, low friction, and long service life. Its durable surface, high-speed core, and four bearings significantly improve efficiency as an ideal tool for the engraving machine.
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
VFD Separate Operation Panel
The variable frequency drive is equipped with full-featured buttons and a detachable panel for quick operation and remote control. Reasonable layout and intuitive digital display increase the convenience of daily use for constant torque loads and variable torque loads.
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Multiple Control Terminals
The VFD inverter is rich in digital and analogy control terminals for versatile control. With 220V single phase input and 220V 3 phase output, the VFD is easy to connect with power and motor. And many preservation ways are adopted to ensure stable and reliable operation.
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Submersible Water Pump
The pump has the advantages of high lift, large flow rate, and excellent insulation. It should be wholly immersed in water to operate. We also provide you with water pipes to connect the water pump with the spindle motor effortlessly.
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Aluminum Spindle Clamp
The clamp with the finished surface is made of aluminum material, which is lightweight enough for you to install, disassemble, and use easily. After the fixing frame is aligned, you only need to turn the screws to the four corresponding holes to complete the installation.
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Complete Accessory Kit
For your convenience, we provide you with 14PCs ER20 collets of different diameters, 20 PCs milling drill bits, aviation plugs, VFD panel keypad extension cord, and connecting wire for use with engraving machines and frequency converters.
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Package Content
  • 1 x Water Cooled Spindle Motor
  • 1 x Variable Frequency Drive
  • 1 x Water Pump
  • 1 x Water Pipe
  • 1 x Spindle Clamp
  • 14 x ER20 Collets
  • 1 x Set of Mill Bits (20 PCs)
  • 2 x Aviation Plugs
  • 1 x VFD Panel Keypad Extension Cord
  • 1 x Connecting Wire
  • 1 x Manual
Vevor Cnc Water Cooled Spindle Motor Kit 3kw 220v Vfd Clamp Pump Pipe Collet
Specifications
  • Model: 100 x 3KW
  • Spindle Motor
  • Power: 3KW
  • Voltage: 220V
  • Frequency: 400 Hz
  • Speed: 0-24000 RPM
  • Current: 10A
  • Collet Chuck: ER20
  • Cooling: Water Cooled
  • Accuracy: 0.002" / 0.05 mm
  • Runout Off: 0.002" / 0.05 mm
  • Bearings: 2 PCs 7003, 2 PCs 7005
  • Variable Frequency Drive
  • Power: 3.7 KW
  • Input Voltage: 220V
  • Output Voltage: 220V
  • Input Phase: 1 Phase
  • Output Phase: 3 Phase
  • Input Frequency: 50 Hz
  • Output Frequency: 0-400 Hz
  • Output Current: 17A
  • Water Pump
  • Voltage: 220V
  • Power: 80W
  • Flow Rate: 3500 L/H
  • Pump Lift: 11.48 ft / 3.5 m
  • Water Pipe
  • Length: 3.3 ft / 1 m
  • Spindle Clamp
  • Diameter: 3.15" / 80 mm
  • Material: Aluminum
  • ER20 Collets
  • Diameter: 1 mm, 2 mm, 3 mm, 3.175 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm
  • Outer Diameter: 0.83" / 21 mm
  • Height: 1.24" / 31.5 mm
  • CNC Router Bits
  • Shank Diameter: 0.125" / 3.175 mm
  • Cutting Degree: 10°, 15°, 20°, 30°
  • Tip: 0.004" / 0.1 mm

Specification

Model 100 x 3KW
Spindle Motor
Power 3KW
Voltage 220V
Frequency 400 Hz
Speed 0-24000 RPM
Current 10A
Collet Chuck ER20
Cooling Water Cooled
Accuracy 0.002" / 0.05 mm
Runout Off 0.002" / 0.05 mm
Bearings 2 PCs 7003, 2 PCs 7005
Variable Frequency Drive
Power 3.7 KW
Input Voltage 220V
Output Voltage 220V
Input Phase 1 Phase
Output Phase 3 Phase
Input Frequency 50 Hz
Output Frequency 0-400 Hz
Output Current 17A
Water Pump
Voltage 220V
Power 80W
Flow Rate 3500 L/H
Pump Lift 11.48 ft / 3.5 m
Water Pipe
Length 3.3 ft / 1 m
Spindle Clamp
Diameter 3.15" / 80 mm
Material Aluminum
ER20 Collets
Diameter 1 mm, 2 mm, 3 mm, 3.175 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm
Outer Diameter 0.83" / 21 mm
Height 1.24" / 31.5 mm
CNC Router Bits
Shank Diameter 0.125" / 3.175 mm
Cutting Degree 10°, 15°, 20°, 30°
Tip 0.004" / 0.1 mm
Shipping & Returns

All products are free shipping; remote place part needs extra shipping fees; no customs fees.

Delivery times

Note: The shipping time is influenced by the COVID-19, and the delivery time of the cargoes will be Delayed by 3 days! Thanks for your understanding!

We adopt the UPS Ground, DHL Ground, GLS to ship your orders.

UPS Ground : Shipping Time 2-6 business days.

DHL Ground : Shipping Time 2-6 business days.

GLS: Shipping Time 2-6 business days.

DHL Heavy Cargoes: Shipping Time 5-10 business days.

DELIVERY DAYS: 2-6 DAYS (2-6 DAYS FOR 99% OF EU)

24 HOURS SHIPPING OUT

SHIP FROM Jenec & Boulevard

About Modification

Once your payment is completed, please inform us by phone or E-mail. And if any modification is needed before we dispatch your package.

The customer will be responsible for all additional charges caused by the alternation of addresses if the contact is made after the item has been shipped.

International Purchase

Import duties, taxes, and charges are not included in the item price or shipping charges. The buyer should be responsible for these charges.

Return Policy

Welcome to our site return policy. All products on our site are 30-day free returns for some reason! Below is our return rules specification.

Claim

Our site return policy is suitable for our official site product, but another site that sells our VEVOR brand is not our responsibility.


Free return condition:

Arrived Damaged

If your product is damaged on the way, it is our obligation, except for human damage. When your product is broken, you need to send us photos of the broken product.

Part missing

If your product parts are missing, we can send you the replacement parts or refund you first. If your product parts are infecting the function of your product, you cannot repair it by yourself or find the local technical person, and we will consider replacing a new item for you.

Wrong item shipped

If you received a product that is not the same as the order, you can send us the product photos; we will do the return service for you.

Not working or faulty

When you receive a product that does not work, you can ask our customer service for help to solve the problem, and we will give you the related technical answer. If it's still not working, you can request a return.

When you receive a defective product, you can ask our customer service to provide technical assistance or a solution. If you can repair it by yourself or in a local store, we will provide compensation.


Conditions that are not compatible with the free return:

Arrived too late

If you have waited for the product for a long time and do not want it, we sincerely apologize for the situation. Because our products are heavy-duty, the processing lead time is longer than the light package.

If the product is sold out and you received it too late, we can compensate you, such as the coupon code or partial refunds.

Don't want it

If you have already received the item but have changed your mind and don't want it anymore, and if you order it by mistake, change your mind, or the price has changed, you cannot return and refund.

Does not match the description

If you received an item that does not match the product description or image, you can send us feedback. Based on the specific reason, we will decide whether to return the shipping fee.

Doesn't seem authentic

As a premium brand operating for 8 years, our products are all brand new, and you can search for them on other platforms as well.

No manual or non-standard manual

When you receive the defective product, you can first contact our customer service by email; We will send you the video or word installation operation manual.

Does not fit

If the size of the product you received is not suitable, you can first contact us to provide a suitable solution due to the reason caused by us.


Conditions that are not compatible with the return:

The item was improperly contaminated, and we have no responsibility for it.

The item was damaged due to your improper use, and we have no responsibility for it.

How to return the original product?

If you want to return the original products, please contact us. We will provide you with the return address and then contact the express company to deliver the product.

How is the return shipping fee?

Regarding the shipping costs of returns, see the above rules. If your return condition belongs to the free return, we will pay you the return shipping costs,otherwise, you pay the shipping costs.

Customer Reviews

Customer Ratings

  • 4.8
  • 4.6
  • 4.7
  • 4.7
  • See more See less
Scott vincent Scott vincent
6 horse power spindle motor
Heavy duty 6 horse power spindle motor , super heavyweight excellent craftsmanship, like a work of art ready to work, I would recommend th product to everyone, built to last fora very long time, and will work with any material. Excellent purchase.
0
Vevor Customer Vevor Customer
Mophorn Spindle
Sehr gut Qualitaet
0
Keith Simcox Keith Simcox
Well made
Delivered very quickly. Easy to use and assemble (mount)
0
funseeker funseeker
Decent, 400W seems light for milling more than foam.
Have wired it up but not used it much yet. Seems decent. 400W is OK for milling foam on a small scale, seems underpowered for wood, definitely not metal.
0
Rawnerve Rawnerve
Four Stars
upgraded the spindle that came with my tabletop machine.
0
Questions and Answers
Typical questions asked about products: Is the product durable? ...
Wholesale Inquiry

We provide extra competitive discount, exclusively better service and more technical support for our distributors.

People Who Viewed This Item Also Viewed

44-330-175-5511 Monday to Friday, 08:00-16:00, GMT+1