VEVOR EU CS
Vyberte zemi/oblast, jazyk a měnu, kterou preferujete pro nakupování.
Doručit
Ireland
VEVOR MT-50 Poloautomatický stroj na etiketování kulatých lahví, nastavitelná etiketovačka na lahve 50ks/min. Aplikátor etiket na lahve 12-90mm
MT-50YPTBJ0000001V2

VEVOR MT-50 Poloautomatický stroj na etiketování kulatých lahví, nastavitelná etiketovačka na lahve 50ks/min. Aplikátor etiket na lahve 12-90mm

34999 
323,99  Nabídka po registraci.
Vydělejte si alespoň 7,00  (700 bodů) zpět, vypočítáno při pokladně. Podrobnosti
Cena včetně DPH Zobrazit podrobnosti
Ušetřete až 15 % s cenou PRO. Zaregistrujte se a získejte bezplatný účet PRO.

Nerezová ocel

  • Hliníková slitina
  • Nerezová ocel
Na skladě

O této položce

  • Všestrannost v celé své kráse: Náš etiketovací stroj vyniká při manipulaci s různými kulatými lahvemi – vzpomeňte si na lékovky, lahve na koření, lahve na nápoje, lahve na víno a další. Je to nezbytný nástroj pro potravinářský, nápojový, kosmetický a další průmysl. POZNÁMKA: Tento produkt není vhodný pro průhledné štítky.
  • Chytrost senzoru: Náš aplikátor etiket, vybavený chytrým fotoelektrickým senzorem pro přesnou detekci a umístění etiket, zajišťuje přesné umístění etiket. Jeho vysoce výkonný motor navíc slibuje špičkovou účinnost a minimální škytavku.
  • Vyrobeno tak, aby vydrželo: Tento elektrický etiketovací stroj jsme postavili s ohledem na odolnost. Jeho nerezové tělo odolné proti korozi, opotřebení a korozi znamená, že je tu na dlouhou trať. Tato robustní konstrukce zajišťuje vynikající výkon.
  • Výměna štítků bez námahy: Náš stroj na nanášení štítků se může pochlubit vylepšeným systémem ručního nastavení otočení, díky kterému je přepínání štítků různých velikostí hračkou. S nastavitelným štítkovým kotoučem můžete upravit šířku štítku podle svých specifických potřeb nastavením napětí šroubu. Výměna štítků nikdy nebyla tak bezproblémová.
  • Estetické štítkování: Náš aplikátor štítků umožňuje snadné nastavení umístění štítků podle velikosti produktu a zajišťuje přiléhavé a stabilní štítkování. Žádné vrásky, žádné bubliny a žádné zvlnění okrajů – pouze hladké a bezchybné značení, díky kterému budou vaše produkty vypadat co nejlépe.

Často Koupeno Společně

Lidé také koupili

VEVOR MT-50 Poloautomatický stroj na etiketování kulatých lahví, nastavitelná etiketovačka na lahve 50ks/min. Aplikátor etiket na lahve 12-90mm
Nerezová ocel
34999  Zbývá pouze 1, objednejte brzy
Na skladě
Etiketovací stroj VEVOR – váš odborník na etiketování po vašem boku
Připravte se na elektrický etiketovací stroj, který je o účinnosti a přesnosti. Přeplňuje váš proces označování, povznáší prezentaci vašeho produktu a činí jej přitažlivějším a konkurenceschopnějším.
Tento etiketovací stroj je vyroben z prvotřídní nerezové oceli a je vyroben tak, aby vydržel. Je odolný vůči korozi a houževnatý jako hřebíky, což zajišťuje, že vaše investice půjde daleko.
Tento stroj na etiketování lahví se může přizpůsobit různým velikostem kulatých lahví, od 0,79-4,72 palce/20-120 mm, což z něj činí všestranné řešení pro různá průmyslová odvětví a typy produktů. Je to váš all-in-one štítkovací kamarád.
Náš aplikátor etiket je dodáván s inteligentním fotoelektrickým senzorem. Detekuje štítky a jejich polohu a zajišťuje přesné umístění štítků. Vysoce výkonný motor pracuje s vysokou účinností a může se pochlubit nízkou poruchovostí.
Efektivita stojí v centru pozornosti! S tímto aplikátorem etiket zvládne celý proces etiketování jedna osoba. Je bleskurychlý, s kapacitou 20–50 štítků za minutu, což vám šetří čas a náklady.

Specifikace

Číslo modelu
MT-50SS-V2
Senzor
fotoelektrický
Použitelný průměr kulaté láhve
0,79-4,72 palce/20-120 mm
Šířka štítku
0,51-5,9 palce/13-150 mm
Délka štítku
0,98-11,81 palce/25-300 mm
Vnitřní průměr role etiket
>2,95 palce/>75 mm
Vnější průměr role etiket
<11,8 palce/<300 mm
Hmotnost produktu
39,13 lb/17,75 kg
Velikost produktu
34,45 x 10,31 x 23,03 palce/875 x 262 x 585 mm
Otázky a odpovědi
14 Otázky
Greetings, I want to purchase one of these machines, but i cannot see the difference between the MT-50SS-V2 and the MT-50Alu-V1models, can you offer some assistance in telling me what are the differences between the two? Thank you.
The casing materials are different, one is aluminum and the other is stainless steel. Another is the sensing method is different, one is photoelectric and the other is optical fiber.
Autor vevor na srp 31, 2024
Hi, what's the difference between them photoelectric and the other is optical fiber. and what are the advantages and disadvantages of them Mvh per-martin karlsson Sverger
Their photoelectric sensing methods are different. This type of optical fiber can adjust the length of the label.
Autor vevor na Nov 29, 2024
I am interested in buying this machine to apply the back label to a wine bottle. I am wondering if it is possible to accurately position the sticking of the label on the bottle (so that the front and back labels do not overlap)? Perhaps with DIY markings?
It is impossible to accurately position the sticking of the label on the bottle (so that the front and back labels do not overlap.
Autor vevor na led 31, 2025
Hello ! What power does the MT-50SS-V2 need Thank You
The power of this product is 50W.
Autor vevor na pro 29, 2024
Can this model stick label and contra label at once? I mean front and back label on same roll.... Thanks
No, this is not possible.
Autor vevor na Smě 07, 2024

Hodnocení zákazníků

Hodnocení podle funkcí

  • 4.8
  • 4.6
  • 4.6
  • 4.7
  • Vidět víc Viz méně
16 recenze
Vymazat filtry
Endiline Endiline
2536 NYERGESÚJFALU, SÁNC UTCA 64. fszt. / 1.
Kedves Vevor! Ismét nem kaptunk számlát a megrendelésünkhöz. Cégként vásároltuk, és a könyvelésbe le kell adnunk a számlát. Kérem küldjék el a kiraly.ignac@endi.hu címre a számlát. Köszönöm Üdvözlettel / Best Regards / Mit freundlichen Grüßen Király Ignác Ügyvezető Endiline Kft. 2536 Nyergesújfalu, Sánc Utca 64. Fszt.1. Tel: +3633200170 Mobil: +36207715524 e-mail: kiraly.ignac@endi.hu www.endiline.hu www.cimkekinalo.hu www.cimkefeltekercselo.hu www.cimkeattekercselo.hu www.feliratozogep.com www.festekszalagok.hu
Lou Lou
You need a lor of patience
We use quite tall bottles and labels, so setting up the machine was a challenge. The assembly itself, as well as using the device, requires some technical knowledge. After making structural corrections to technical errors, it is ready for use, and when it does work, it is really fast. The microswitch starts itself, so sometimes the machine makes one empty revolution after lifting the lever. In general, it is possible to work on it, although personally I would use slightly different materials to increase the accuracy of gluing labels and also to guide the paper.
SmallProducer SmallProducer
CEO
I am really happy with this bottle labeller. It was a bit tricky to set up and I had to search the internet for set-up guidance as there was no instructions provided (I knew this before I purchased it so was prepared!). It is a pleasure to use it compared to labelling by hand. It would probably be best to have separate machines for each type of label for convenience and I'd have no hesitation in buying another one.
Nakos Nakos
Amazing
Highly recommended.. Amazing machine for the price But you have to take enough time to set the roll paper at the proper place. If not it's impossible to use it.
Thomas Thomas
Top
Auspacken, einstecken, einstellen, etikettieren. Hat sofort funktioniert. Etwas technisches Verständnis notwendig, da Dokumentation schwach (1 Stern abzug).
Awa Awa
machine moyenne
Bon produit ,des fois il y_ des petites bulles d.air
victor victor
Perfecto
Me gusta mucho y desempe?a su funci_ muy bien, lo _ico q deber_ tener unas instrucciones de montaje mejor y como poner el rollo de pegatinas y por donde deber_n pasar por los rodillos
neobotanics neobotanics
Ware wie beschrieben aber:
Mit etwas Besch?ftigung kann man das Ger?t sehr gut einsetzen. Leider ist die Beschreibung etwas d_ftig . Gott sei Dank gibt es YouTube und man findest zu dem Produkt einige brauchbare wie man Produkt einsetzen kann. Dann ist es simpel wenn man weis, wie man die Label einlegt.
Pedro M. L_ez Guti_rez Pedro M. L_ez Guti_rez
Servicio r_ido
Es fiable y bueno
A. Ra A. Ra
Top Produkt
Der Versand war deutlich schneller wie angegeben, binne 3 Tagen war die Maschine da. Die Maschine war absolut sicher Verpackt. Sie kam in einen Karton, in diesen Karton war eine Holzkiste in dieser wiederrum befand sich die Maschine, jedes Teil der Maschine nochmal seperat mit Folie und F_lmaterial abgesichert!Zum Aufbau: leider liegt keine Aufbau Anleitung mit bei, sondern nur eine Betriebsanleitung, dieses Problem war allerdings nach einigen Minute Internet recherche erledigt,einfach nur den Model Namen eingeben und man bekommt Zahlreiche Videos die den Aufbau sehr genau erkl?ren und vormachen, quasi idiotensicher damit:-)Viele Teile muss man nicht zusammenbauen, da das meiste schon vormontiert kommt, dennoch sind einige Einstellungen zu t?tigen daher ist so ein video unerl?sslich. Die ben?tigten Werkzeuge sind im Lieferumfang enthalten und reichen v?llig aus. Positiv zu erw?hnen ist auch, dass zwei Endschalter und diverese Ersatz Sicherungen mitgeliefert werden!Das Produkt ist sehr hochwertig gefertigt und l?sst sich ohne Probleme und passgenau zusammenbauen, die Lager sind alle g?ngig und Leichtl?ufig, die Motor_ersetzung wird mittels Steuerkette _ersetzt, also alles wertig und solide gearbeitet!Nach der Feineinstellung arbeitet das gute St_k optimal, die Sensoren erkennen zuverl?ssig das Ende der Etiketten, Die Dosen drehen sich optimal _er die Rolle ab und das Etikett bleibt kleben, die Funktion ist iwelcher Probleme gegeben, absolut geeignet f_ den halbautomatischen gebrauch und kann sie auch besten gewissens weiter empfehlen!

Lidé také koupili

Lidé, kteří si prohlíželi tuto položku, si také prohlíželi

Tipy a inspirace
Ke zlepšení vašeho online zážitku používáme soubory cookie.Pokračováním v procházení tohoto webu předpokládáme, že souhlasíte s používáním souborů cookie a Ochrana soukromí a zabezpečení.
SOUHLASIT
co-subscribe-content-left
Dík! Jste na seznamu!
Další exkluzivní nabídky najdete ve své doručené poště.
OK