Deals

VEVOR Utility Sink Pump 350W 7200L/h Flow 26.2 ft / 8 m Head Drain Pump, Waste Water Disposal Machine with 3 Inlets, Portable and Powerful Performance, for Basement, Sink, Shower Room, Gray Water

Water Electric Separation Design for Dependable Motor Protection

Because water gets into the motor, small drainage units often break down early. This utility sink pump uses a water-electric separation arrangement that keeps the liquid path and the electrical core physically separate. Although the motor stays separate and dry, the pumping chamber moves wastewater. This keeps the windings safe and lets the output stay steady as loads come in. It makes a machine you can use even when you are busy, without worrying about damage from splashback or condensation.

Backflow is the second most common issue, and a built-in check valve handles it immediately. When the cycle ends, the valve closes to stop liquid from draining back into the basin after it pushes toward the discharge outlet. In other words, the washbasin doesn't slowly refill with the water you pumped out. For daily drainage, the sealed motor and one-way valve work together to ensure steady performance. 

350W Motor with 7200L/h Flow for Fast Simultaneous Drainage

Drainage speed depends on how fast water moves through the basin. The 350W motor in this washbasin drain pump moves water quickly. It can run as fast as 120 LPM, which is about 7200 L/h. In other words, a full sink drains quickly instead of slowly. When multiple fixtures feed the line at the same time, water doesn't pool at the drain because there is enough headroom.

The unit's large size also makes it useful for real homes, not just for occasional small jobs. When the dishwasher runs, the laundry sink loads, or the shower runs, a lot of water comes out in short bursts. This is when a weak pump really struggles. This output makes it easy for the pump to handle those spikes and move the grey water out of the way before it can build up. If you replace an older model that isn't strong enough, you will notice right away that the new one moves the water away faster. 

26.2 ft / 8 m Max Head for Lifting Waste to the Main Drain Line

When the fixture is not conveniently located above the sewer line, lift capacity becomes the deciding factor. With a maximum head of 26.2 ft (8 m), this basement utility sink pump can lift wastewater long distances to the main drain. Bottom level sinks, laundry rooms, and converted below grade rooms all benefit because gravity alone cannot get their waste where it needs to go.

Connecting to three inlets makes that reach very flexible. Multiple fixtures can connect to the same unit, so you do not have to install separate drains for each one. Instead, a single device can handle multiple drainage points. With an 8 m head, this makes a plumbing layout that was a pain easier to handle. The pump always gets the load to the main line, even if it is in a shower room out of the way or a utility corner far from the stack.

Pure Copper Utility Sink Pump Motor for Extended Service Life

How well the motor handles heat determines how long a drainage device lasts. That is why this utility sink pump has a pure copper motor. Copper windings conduct electricity well and lose heat more effectively than cheaper alternatives. This means that the unit stays cooler even when it cycles back to back. Lower operating temperatures reduce wear and extend service life.

This design keeps the motor cooler and can handle more demanding duty without losing performance like some other motors. A pump's output and dependability often drop as it warms up, but the copper core helps it stay steady during long sessions. This thermal stability is what makes the difference between a short lived purchase and one that keeps working season after season, quietly earning its place in the room.

Corrosion Resistant PP Housing for Warp Free Long Term Use

Drainage machines live in wet, sometimes chemically harsh environments, so the enclosure must withstand more than impact. We used corrosion resistant polypropylene for the housing because it does not hold onto water and residues that break down weaker plastics over time. It doesn't rust and can handle constant moisture, which is what happens when you deal with grey water all day.

Chemical resistance matters, but structural stability matters more. PP doesn't change shape when it gets hot or under constant stress. This means the shell won't warp or crack, which could otherwise let leaks form at the seams. Over the product's life, that dimensional strength keeps the internal parts sealed and in place. The unit has a strong base, with a tough outer case and a protected motor. It can keep working in basements, laundry rooms, and shower areas without breaking down.

Quiet Utility Sink Pump Operation with Breathable Discharge Valve

People often complain that drainage equipment in living areas is too loud. This utility sink pump is tuned to run quietly so it does not get in the way of daily life. It runs quietly enough to blend into the background, unlike cheaper units that grind and vibrate loudly. So you could really live in a finished basement, a home office corner, or a shower room, places where constant harsh noise would otherwise be a problem.

With a breathable discharge valve, you can also control the smell. Some drainage systems can bring bad smells back into a room. This valve lets air out in a controlled way while also keeping smells from coming back inside. The result is cleaner-feeling air alongside quiet operation, so the space stays comfortable without making you aware that a wastewater device is working nearby. This way, the unit can handle messy work while keeping the room pleasant.