VEVOR Macerator Pump, 500W, 110 L/min(29 GPM) Flow, 26 ft/8 m Head, Macerator Sewerage Toilet Pump with 4 Water Inlets, Waste Water Disposal Upflush Machine for Toilet, Basement, Shower, Sink, Laundry, Bathtub

Macerator Pump for Toilet with 500W Motor and 29 GPM Flow

The macerator pump for toilet is powered by a 0.7 HP, 500W motor with a maximum flow rate of 29 GPM (110 LPM). That output also keeps the toilet flushing properly even during heavy use, which matters in a household bathroom that sees frequent traffic throughout the day with no drop-off in performance between flushes.

One of the more important specs to consider when comparing macerator pumps is a strong, consistent flow rate, as underpowered units can struggle to keep up during busy mornings or when multiple fixtures drain into the same system at once. This requirement is the demand that this toilet macerator pump is built to handle with ease. No matter how often the system is called upon, it will keep the wastewater flowing smoothly, even during those times of exceptionally heavy household traffic.

26 ft Head Lift for Reliable Wastewater Drainage

The pump can lift to a head of 26 ft (8m). It will move wastewater efficiently regardless of your space layout, whether it is a basement bathroom well below the main sewer line or a laundry room awkwardly placed relative to existing plumbing. That lifting capability allows for upflush installations in locations that would normally need expensive digging or rerouting work to connect to a gravity-fed line.

That head lift number is one of the most important to check before buying if you are a homeowner adding a bathroom in the basement or converting an unused space into a functional laundry or utility room. For certain layouts, a pump that cannot lift wastewater high enough is not an option, and the 26 ft of lift capability here addresses a variety of practical installation situations, including multi-level basements or rooms located well below the main floor.

Stainless Steel Anti-Clog Blades for Smooth Operation

This macerator pump for toilet is fitted with stainless steel grinding blades and a heavy-duty copper motor to grind waste before it moves through the system, preventing the pipe blockages that lower-quality macerator pumps are prone to. That anti-clogging design is super important for long-term reliability, as clogs are one of the most common reasons macerator systems fail or require service calls down the line.

Grinding the waste into smaller particles before pumping it out puts less strain on the downstream plumbing system, including narrower pipe runs that wouldn’t handle larger solid waste well on their own. If you're putting this system in an area with smaller-diameter drain lines, the grinding mechanism is part of what allows the whole upflush system to work reliably over the long term, even with regular daily use across multiple fixtures.

Copper Motor Rated for 75°C Wastewater Handling

The pump motor is housed in an oil-filled copper enclosure and waterproofed to IPX8 standards to withstand wastewater temperatures up to 75°C (167°F) from washing machines and dishwashers. That heat tolerance is important because hot water discharged from these appliances passes directly through the macerator system, and a motor that isn’t designed for that temperature range will wear out far faster than one that is.

Copper motor construction tends to provide better heat dissipation and more consistent performance over time than cheaper motor windings, which is important for a fixture that is expected to run reliably for years with minimal regular maintenance. This is the build quality that separates this macerator pump from more disposable budget options that could fail within a year or two of regular use.

4 Water Inlets for Toilets, Sinks, Showers, and Tubs

The pump has four water inlets in total. One 89mm inlet for toilet connections and three 40mm inlets for sinks, showers, and baths. This gives the system enough flexibility to serve a whole bathroom or laundry setup from a single pump, rather than requiring separate units for each fixture scattered throughout the same space.

This unit has four inlets, as opposed to the three on many other macerator pumps, which gives it a little more flexibility for bathroom layouts that include extra fixtures, such as a shower-tub combo or an extra sink. For those doing a more extensive bathroom renovation, rather than just a simple toilet installation, that extra inlet capacity is a huge practical benefit. It may save you equipment costs in the future.

13.23 lbs Macerator Pump for Toilet, Compact Installation

This is a bit larger than a typical single-inlet unit, but at 13.23 lbs, it’s still pretty light, and at 16.54 x 6.3 x 11.02 inches, it’s not too big to install in a smaller space. That size allows for the extra plumbing hookups needed to accommodate four separate water inlets without making the unit unreasonably bulky or hard to fit behind a toilet or in a utility closet.

The pump provides a complete, self-contained system for basements, laundry rooms, or anywhere there is no existing drain access, and it can handle waste from multiple fixtures simultaneously. Add to this the anti-clog blade design and strong flow rate, and it’s designed to be a true all-in-one wastewater solution, not a stripped-down single-purpose unit, and an excellent practical centerpiece to a full basement or utility room renovation.