VEVOR Cordless Grease Gun, 8000 PSI Max Pressure, 20V Electric Grease Gun with 2.0 Ah Battery & LED Light, 35.4-inch Long Hose & Carrying Case, Variable Speed Triggers, Vehicles or Machines Greasing

Maximum Pressure of 8000 PSI for Quick and Dependable Greasing

With a maximum pressure of 8000 PSI, this VEVOR 20 volt grease gun pushes grease through fittings swiftly and without clogging. Every time you pull the trigger, the pump delivers consistent force, whether you are working with stubborn zerks or heavily loaded bearings. Even in demanding conditions that might cause a lower-pressure tool to stall, you receive consistent grease flow at every fitting.

Compared to manual options, the gun's 5 oz per minute (140 g per minute) output greatly speeds up lubrication tasks. The die-cast aluminum pump head can withstand high-pressure cycles without prematurely wearing down or cracking. Whether you are servicing a single car or a fleet, you spend less time on each fitting and more time keeping your equipment running efficiently.

20 Volt Grease Gun with 2.0Ah Battery for Extended Runtime

The 2000mAh lithium-ion battery that powers the 20 volt grease gun maintains its charge for extended periods. Compared to cordless tools with smaller capacity, you can complete more fittings per charge, minimizing disruptions when working with larger equipment or multiple machines. Instead of struggling with the tool itself, you can concentrate on the task at hand because the battery slides in firmly and releases neatly without fumbling.

If your 2.0Ah pack runs low in the middle of a task, you can replace it with a battery you already own, as the gun also accepts Makita 18V batteries. The tool is a useful addition to any existing cordless toolkit because of its cross-compatibility. You save money and bag space on hectic workdays with on-site flexibility, without purchasing extra chargers or adapters.

20 Volt Grease Gun with Variable Speed Trigger for Precise Grease Control

You can precisely control the rate at which grease enters each fitting with the variable-speed trigger. For slow, deliberate work on delicate components, you use lighter pressure; for high-capacity fittings, you use more pressure for faster throughput. One of the most frequent causes of seal damage and bearing failure in both automotive and industrial equipment is overgreasing, which this range of control reduces.

You stay away from fixed-speed tools' all-or-nothing output. Rather, you adapt the flow rate to each unique fitting and circumstance. The trigger gives you the precision to complete the task neatly and accurately the first time, eliminating the need to remove excess grease from the area around the fitting, whether you are working on a large industrial pivot point or a small automotive joint.

Steel-Reinforced Hose with Tight-Seal Threads for Zero Leaks

The steel-reinforced hose used in the 20 volt grease gun withstands the full 8000 PSI working pressure without splitting, bulging, or cracking. High-pressure cycles that wear out standard hoses do not affect this construction. Throughout the job, session after session, you maintain a consistent flow from the pump head to the fitting without any decline in hose performance.

Every connection point has tight-seal threads to stop grease from leaking between parts. The air release valve helps prevent pressure spikes, drips, and mess while maintaining a constant flow. You minimize grease waste, maintain a tidy environment, and prevent the annoyance of having to stop, clean surfaces, and reposition equipment before moving forward due to leaks.

Dual Hose Options for Flexible Access in Tight or Open Spaces

The gun comes with two hose options in one package: a flexible 35.4-inch hose and a rigid hose. When you need a straight, stable supply in open areas where the fitting is easily accessible, you choose the rigid hose. It stays in place without wobbling, allowing you to apply grease precisely where it needs to go and keep clean contact with the zerk during the entire stroke.

The flexible hose can reach fittings hidden under decks, behind frames, or deep inside equipment housings by bending around obstructions. Reaching problematic lubrication places does not require removing panels or moving heavy machinery. You may quickly switch between the two hose options, allowing you to perform an equipment inspection without losing time or repositioning.

Built-In LED Light and Carrying Case for Portable Convenience

You can find fittings quickly, even in dark bays, under cars, or in small machine compartments, thanks to the integrated LED light that illuminates the work area directly in front of the nozzle. You begin operating with complete confidence and cease speculating at zero places in low light. During hectic service sessions, operation is quick and easy since the light turns on with the tool and does not need a separate switch.

Between usages, the included carrying case keeps the gun, battery, charger, and both hoses safe and organized. You may place the gun on any flat surface without its toppling over or picking up floor contamination, thanks to the support feet on the main body. When the task is finished, you do not have to search for loose accessories because you can pack everything in one trip, arrive at the job completely equipped, and pack up swiftly.