VEVOR Fuel Transfer Pump 230V, 16 GPM 60 L/min, AC Electric Oil Transfer Pump for Diesel Kerosene Biodiesel, with Meter, Auto Fuel Nozzle & 2 Hoses, 45 ft/13.7 m Lift, for Vehicles, Construction Sites

Electric Fuel Transfer Pump with 60 L/min Flow and 45 ft Max Discharge Lift

If you need to transport large volumes of gasoline quickly, the VEVOR ETM-60N-01 can deliver up to 16 GPM (60 L/min). That’s a lot more output than most portable electric fuel transfer pumps in this size range. It has a 45 ft (13.7 m) maximum discharge lift, so it can push fuel up ramps, long distances, or into high tanks that other pumps can’t reach.

With a max suction lift of 8 ft (2.4 m), the pump can draw fuel from drums or tanks below it and does not need to be at the same level as the fuel source. All of this is driven by a 0.5 HP (370W) motor operating on 230V AC, providing you with constant, reliable output without the pump suffering or overworking during extended fueling sessions. If you require an electric fuel transfer pump that truly meets heavy-duty fueling needs, this one is designed specifically for that.

0.5 HP Cast Iron Build with Waterproof Switch for Outdoor and Site Use

The ETM-60N-01 is built from cast iron for structural strength and chemical resistance, and it withstands diesel, kerosene, and biodiesel without wearing down over time. Cast iron can withstand repeated pressure and temperature fluctuations much better than plastic or aluminum in frequent commercial fueling operations. It’s the sort of material decision that makes a pump last years rather than months.

The waterproof power switch is a detail that matters more than it may seem, since it allows you to run this electric fuel transfer pump in wet weather, damp storage places, or any situation where moisture is likely to be present. This outdoor-ready structure makes this pump a practical alternative for construction sites, farms, and any other place that doesn’t have the luxury of a clean, dry interior setup. In tough situations, you may rely on it without fear that the switch will fail or create a safety concern.

Handles Diesel, Kerosene, and Biodiesel Across a Wide Range of Equipment

This pump is suitable for diesel, kerosene, and biodiesel, covering the most popular fuel types used in trucks, tractors, excavators, generators, and other diesel-powered equipment. The usual inlet and outlet sizes are 1 inch (25.4 mm) and fit most common hose and fitting sizes you’ll find on that kind of gear, so you won’t need adapters or reducers in most circumstances. If you’re running a mixed fleet or have several equipment types across a job site, this pump attaches cleanly to whatever needs fuel.

One thing to remember is that this pump is not for petrol or other flammable liquids. It should only ever be used with diesel, kerosene, or biodiesel. It is dangerous to use the wrong fuel type because it can damage the pump internally. Use only the permitted fuel types, and this pump will provide reliable service for years of normal professional use.

Electric Fuel Transfer Pump with Flow Meter and Auto Shut-Off Nozzle Included

This electric fuel transfer pump gives you 60 L/min, so you won’t be standing around waiting for a large truck or excavator tank to fill up slowly. The high flow rate is important when you have several machines to fill one after another and not much time between shifts to fill them all. At this output level, a slower pump would take 20 minutes to do the same jobs, but this pump often does them in far under 10 minutes.

An integrated flow meter takes the guesswork out of how much fuel has gone into each tank, providing an easy-to-read measurement right at the pump without the need for a separate instrument. An auto shut-off fuel nozzle completes the package, automatically shutting off the flow when the receiving tank is full, preventing overflow and keeping the fueling process clean. The package contains the meter and the nozzle, so when you open the box, you have everything you need to fuel precisely and safely.

Dual Hose Kit and 1-Inch Standard Fittings for Fast, Compatible Setup

The pump comes with a 13 ft (4 m) rubber output line and a 6.6 ft (2 m) PVC intake hose, which provide ample reach to conveniently place the pump between your fuel supply and the equipment you are filling. The rubber outlet hose is flexible enough and tough enough to handle the everyday grind on a job site without splitting or hardening over time. The pump is ready to use right away, with both hoses included, so you don’t have to search for extra parts before your first use.

The 1-inch standard inlet and outlet fittings connect to the most common pipe and hose diameters used on trucks, tractors, and construction equipment without any conversion hardware. This broad compatibility means installation is fast and easy, which is ideal when you are in the middle of a busy workday and don’t have time for a complicated setup. All parts of this kit are designed to work together immediately after you unpack it.

Built-In Overheat Protection for Safe Extended Operation

If the motor becomes too hot during a long fueling session, the built-in overheat protection instantly kicks in to shut off the pump before any internal damage can occur. This is especially good if you have back-to-back fuelling jobs and the pump runs non-stop for a long time without a break. It frees you up to watch one less thing and focus on the fueling process instead of monitoring the pump itself.

This electric fuel transfer pump is designed for professional use, featuring a waterproof switch, a cast-iron body, an overheat cutoff, and a complete hose-and-nozzle kit. It’s built to be used on a building site, a farm, or in a commercial yard and provide dependable performance in dry, light-duty conditions or wet, harsh ones. If you need a pump that's ready for hard, everyday use, this VEVOR model is a reliable, practical choice.