VEVOR Condensate Removal Pump, 1/50 HP, 65 GPH, 15ft/4.57m Lift, 1/2 Gal Tank Automatic AC Condensation Pump with Float Switch & 20 ft Hose for Air Conditioner, Dehumidifier, Furnace, Ice Maker Water Drain

Condensate Removal Pump Design for Air Conditioner and Dehumidifier Drainage

AC units and dehumidifiers generate condensate that needs to be removed from the air, and this condensate removal pump does that job automatically, without anyone having to mop up after it. It’s powered by a 1/50 HP motor with a 1/2-gallon tank, and it collects condensate from air conditioners, dehumidifiers, furnaces, and even ice makers and pumps it out to a proper drain line instead of letting it accumulate and overflow onto the floor below.

That one-pump versatility is critical in basements and utility rooms where multiple appliances produce condensate, but only one drain line can be reached by all of them. This pump does the job instead of separate drainage systems for each unit, pumping water away from boilers and furnaces installed well below or away from a standard floor drain, which would otherwise require expensive plumbing work.

1/50 HP Motor for 65 GPH Maximum Flow Rate

This 1/50 HP motor is not intended to compete with industrial sump pumps. It doesn’t need to be: with a maximum flow of up to 65 GPH and approximately 15 ft of head, this condensate removal pump is sized for the steady, moderate volume of condensate that equipment actually produces, not industrial wastewater or stormwater runoff. That output is comparable to normal AC or dehumidifier runoff, without the motor working harder than the job realistically requires on a day-to-day basis.

It helps extend motor life and keep energy consumption reasonable for a unit that might operate for hours in humid weather or during a long cooling season that lasts for months. This flow rate empties the tank quickly enough that it rarely approaches the tank's capacity limit for typical residential or light-commercial condensate loads, even during sustained summer periods of heavy AC use.

Automatic Float Switch for Hands-Free Pump Operation

Since it isn’t always feasible to manually drain the condensate that accumulates around the clock, this pump is equipped with an integrated float switch that turns on and off automatically, saving you from constant attention or frequent checks. The pump automatically powers up when the water in the tank reaches around 2-1/4 inches and turns off when it reaches around 1-1/4 inches, cycling on its own as condensate builds over time, with no manual intervention by the homeowner.

That hands-free cycle means the pump is never attended to as long as the connected equipment continues to make water, overnight, over a weekend away, or through an extended cooling season lasting months. Installation is just as simple: plug in the power and water lines, and the float switch takes care of the rest, with no setup, programming, or guesswork on your part.

Durable Stainless Steel Motor and Ultrasonic-Welded Float Switch

Mechanical float switches can wear out after months of continuous cycling in harsh, humid environments. Still, this one is ultrasonically welded and sealed with ABS adhesive and rated for 500,000 switch cycles before installation even begins. That kind of testing is important for a condensate removal pump that’s expected to kick on automatically day after day, with no one regularly checking on it during the cooling season or troubleshooting unexpected failures.

The motor housing itself is made of stainless steel, which resists corrosion that can eat away at standard metal pump motors when exposed to constant moisture and humidity over time. Between the sealed switch and rust-resistant motor, the build is designed to ensure this pump will run in a damp environment for its entire working life, not just from time to time during a humid spell.

Built-In Security Switch and Thermal Overload Protection for Safe Operation

An overfull condensate tank can cause real water damage to floors, walls, ceilings, or equipment below. This pump has a security switch that can shut off a connected air conditioner or set off an alarm if the pump malfunctions unexpectedly, catching a problem before water spills over the tank’s edge and onto the floor below, causing lasting, costly damage to the surrounding area.

That’s backed up by thermal overload protection on the motor side, which cuts power if internal temperatures get too high, reducing the risk of the motor burning out during extended or strained operation in peak summer months when demand is at its highest. In tandem, these two safeguards mean you're more likely to get a notice of a pump failure than a flood, allowing you to act and fix the problem before any real damage is done to your property.

Condensate Removal Pump with 20 ft Hose for Flexible Equipment Compatibility

This condensate removal pump features a standard 1-inch inlet and 0.4-inch outlet and comes with a 20 ft hose, so it’s built to reach equipment that’s not conveniently located next to a drain or plumbing line. That length of hose is for boilers, furnaces, air conditioners, and dehumidifiers located in hard-to-reach places, such as a basement corner, a crawlspace, or a mechanical closet that is completely isolated from existing plumbing lines.

The unit is small enough to fit alongside the equipment it’s draining without crowding an already tight mechanical space, measuring 11.42 x 6.69 x 7.28 inches and weighing just 4.63 lbs. One installation note worth flagging: The pump cannot be installed in the same cabinet as an ice maker, so check the available space around any combined setup carefully before purchasing to avoid a tight fit later.