VEVOR Tumbler Heat Press Machine, Max 444 mL Mug Press, Fast and Even Heating, with Tape and Gloves, Easy Temp and Time Setting, Heat Transfer for Sublimation Tumblers, Cups, Mugs, Black and White

NTC Temperature Sensing and 1-Minute Preheat for Fast, Even Heating

The NTC temperature sensing in this VEVOR sublimation tumbler heat press tracks heat as the press warms up. With only a 1-minute preheat, you spend more time pressing and less time waiting. That fast start comes in handy when you have many cups ready for the same session. It also means you can press a mug soon after deciding to make one.

Heat also strongly affects how a sublimation print looks. If one part of the mug gets much hotter than another, the transfer may not look even. The temperature difference in this press stays at 30°C or less, which helps make the transfer results clear and sharp. The entire printed area can show your design details clearly. Fast preheating and steady heat let you press one mug after another without long waits.

0-220°C Temperature and 0-999s Time Range for Precise Control

Often, you need different settings for different blanks and transfer papers. This press lets you adjust the temperature within 0-220°C and the time within 0-999s. You can set the heat press parameters for each project, then change them again when you start a new job or use a different type of paper.

This level of control makes the sublimation tumbler heat press useful for a wide range of custom tasks. Turn up the heat for one design and then turn it down for the next. Set a shorter time for a quick test piece, or a longer one if your paper needs it. The 0- 999 range covers both short and long presses. To give beginners a clear starting point from day one, the manual includes suggested temperature and time settings. As you improve, you can tweak those numbers to match your blanks and the results you want.

Sublimation Tumbler Heat Press with 74-87 mm Fit for Mugs up to 444 mL

This press is made for wide-mouth ceramic mugs. It fits cups up to 444 mL with a diameter of 74-87 mm and a height of up to 100 mm. The machine includes a mug heating pad for 444 mL ceramic mugs, so you can start pressing standard mug blanks right away.

Measure your blank before you start. Make sure that the cup is 74-87 mm in diameter and no more than 100 mm tall. When the mug is within these limits, it fits properly in the heating pad. This helps heat transfer evenly around the surface. Taller or wider cups fall outside this range, so check the size first. Knowing these limits ahead of time helps you order the right blanks and avoid fit problems mid-job. Checking first also saves transfer paper.

LED Screen and Auto Timer for Easy Temperature and Time Setting

The control panel makes setup easy. An LED screen shows your settings clearly, and the touchscreen lets you set the time and temperature. When you set the settings, they stay right in front of you while you press, so you don't have to guess.

Using the auto timer saves you time and effort. You set the pressing time, and the sublimation tumbler heat press tracks it for you. This way, you can focus on lining up the next mug or cutting the next transfer. It also lets you use the same settings for the whole batch, so results stay consistent from cup to cup. A clear screen and easy-to-use controls make the first few projects less stressful for first-time users. Regular users can speed up their work with the same features. Before you load a mug, check the screen to make sure the temperature is correct.

Sublimation Tumbler Heat Press with No Installation for Out-of-the-Box Use

You don't need to install this press; it is ready to use as soon as you get it. Remove it from the box, place it on a stable work surface, and plug it in. The manual includes clear operating instructions and suggested temperature and time settings, so you can do your first transfer with clearer guidance.

It comes with gloves and tape, so you have the basics you need for your first project. Use the tape to hold your sublimation transfer in place on the mug. This keeps the design from shifting while you press. When you handle a mug after pressing it, the gloves protect your hands. At 4.15 kg, the machine is easy to move and place on a desk, shelf, or craft table. That makes it a good choice for beginners or anyone who wants to skip the long setup process.

Carbon Steel Plate and Stainless Steel Build for Home DIY and Small-Batch Production

The press is made of a carbon steel plate, stainless steel, and plastic. The black-and-white finish looks clean and fits on a craft desk, a shelf, or in a small studio. You can make custom cups for yourself, your family, or your friends at home with this sublimation tumbler heat press. Personalized mugs are thoughtful gifts that you can make yourself for holidays, birthdays, and other important events. 

One machine can also make small batches for sale, making it a good choice for side businesses and small shops that take custom orders. Quick preheating and precise temperature and time control help you keep up with incoming orders. This press is a useful tool for crafters and sellers who want professional results without the premium price. It can turn plain ceramic mugs into personalized gifts or ready-to-sell items.