VEVOR Oval Pool Liner, 375 x 732 cm UniBead Swimming Pool Liner for 120 cm Wall Height, Premium Vinyl, Easy Install with Leak-Proof Patches, Designed for Steel Sided Above-Ground,Outdoor, Blue

VEVOR 375×732 cm Oval Swimming Pool Liner Delivers Wrinkle Free Precision Fit

The VEVOR oval swimming pool liner is designed to fit oval pools measuring 375×732 cm. It is a specific shape that regular rectangular or round liners can't fit without wrinkling or bunching at the ends. Folds in a pool liner are not just unattractive; they trap dirt, accelerate UV damage at the crease, and create weak spots that break under water pressure. 

The 120 cm wall height requirement is the same as the standard steel-sided above-ground oval pool frames sold in Europe. The most common cause of liner blowout at the bead channel is an incorrect wall height. If it's too short, the liner pulls free under hydrostatic pressure; if it's too long, it bunches at the base and tears at the overlap. 

0.4 mm Thickened Premium PVC Construction Resists Puncture and Wear Across Seasons

This swimming pool liner features a 0.4 mm vinyl layer, which is thicker than the 0.3 mm baseline for most entry-level above-ground liners. That extra 0.1 mm makes the liner more resistant to punctures when swimmers push off the pool floor, when pool-cleaning brushes contact the sidewall, and when debris settles under the liner during installation. Vinyl fatigue from repeated flex cycling, which can contribute to failure in thin liners, happens much more slowly at 0.4 mm gauge.

This pool liner is made with plasticizers that keep the material flexible even as temperatures change from summer to winter. PVC that loses plasticizer over time becomes brittle and develops stress cracks along fold lines. The 0.4 mm premium compound solves this problem through its chemical makeup, not just its size.

UniBead Installation System Fits Both J-Hook and Overlap Pool Frame Standards

This swimming pool liner features a UniBead bead profile compatible with J-hook and bead receiver installation. It locks into place and can also hook over the top of the wall. UniBead eliminates that risk of incompatibility, which is very important for oval pools because the curved frame geometry already makes it hard to find liners.

The bead seats around the edge as the weight of the water pulls the vinyl flat against the pool wall. The design is meant for one person to set up in less than two hours on a standard 375×732 cm oval frame. For pool owners who need to replace a liner that has reached the end of its life in the middle of the season, the speed of the installation directly affects how many days of swimming are lost to the maintenance window.

All-Season UV and Cold-Temperature Resistance Protects the Oval Swimming Pool Liner Year-Round

This swimming pool liner is designed for outdoor year-round use. UV damage to vinyl pool liners starts with fading colors, then chalking on the surface, and finally making the material brittle so that it cracks when people walk on it. The UV stabilizer package in this liner's PVC compound interrupts that degradation sequence at the molecular level rather than relying on surface coatings that wear off.

The other requirement is low-temperature flexibility. If a liner can handle summer UV but becomes stiff and prone to cracking when folded for winter storage, it doesn't meet its all-season brief. This vinyl compound's plasticizer retention keeps it flexible even at temperatures well below the freezing point of pool water. 

Matte Anti-Slip Backing Anchors the Pool Liner Against Hydrostatic Displacement Forces

The bottom of this oval swimming pool liner features a matte, anti-slip backing that creates friction with the pool's sand or foam base layer. If the backing grip isn't strong enough, hydrostatic pressure from quick filling or many people bathing at once can move the liner sideways, causing it to bunch up at one end and putting dangerous tension on the other wall. 

The matte texture derives its grip from the surface's shape, not from adhesive. It means the backing stays effective after multiple installations, doesn't leave residue on the pool base, and doesn't break down as water chemistry changes with the seasons. For oval pool owners who drain and reinstall their liners every year, adhesive-backed liners lose their grip each time they are reinstalled. 

Leak-Proof Patch Kit Included for Immediate Field Repair Without Pool Drainage

Every VEVOR oval swimming pool liner comes with leak-proof patch materials that can be used underwater. It means you don't have to drain a 375×732 cm pool to fix small holes or stress points in the seams. A standard oval pool with 120 cm-high walls can hold about 8,000 to 10,000 liters of water. Draining and refilling that much water to fix a 2 cm hole would cost a lot of time and money, which is not worth it. 

The patch adhesive is formulated to adhere to the same 0.4 mm PVC compound as the liner body. It creates a repair bond as flexible and chemical-resistant as the original material, rather than a rigid repair zone that peels at its edges when the pool moves. The matched-compound patches that come with this liner are designed for durable repair, not just cover up the damage for a short time.

Steel-Sided Above-Ground Pool Compatibility Makes a Direct Replacement

This oval swimming pool liner is made just for steel-sided above-ground pool frames, which are the most common type of above-ground pool in Europe. Steel-sided frames create specific liner requirements. For example, the corrugated sidewall profile requires a liner that can conform to the steel wall profile, and the top rail clamping system requires a bead channel geometry that can withstand more than 10,000 liters of hydrostatic load.

The 375×732 cm footprint and 120 cm wall height specification covers the most popular size of oval steel frame in Europe. Pool owners who need to replace a broken liner on an existing frame don't want to resize, re-excavate, or change the frame to fit a new liner. The VEVOR swimming pool liner fits right into the existing steel structure and is designed to fit the existing steel structure.