VEVOR Macerator Pump, 500W, 6600 L/h Flow, 26.2 ft/8 m Head, Macerator Sewerage Sump Pump with 3 Water Inlets for Toilet, Basement, Kitchen, Sink, Shower, Bathtub Waste Water Disposal Upflush Machine

Macerating Toilet Pump with 500W Motor and 6600 L/h Flow

This macerating toilet pump is powered by a 500W copper motor, with a maximum flow rate of 6600 L/h and a maximum head lift of 26.2 ft (8m). That combination provides the pumping power to collect, treat, and discharge bathroom waste from a basement or other below-grade space without extensive plumbing renovations to install a traditional gravity-fed system.

The copper motor construction is designed to provide long-lasting performance and withstand the rigors of continuous sewage processing without the premature wear that lower-quality motors experience under similar conditions. This kind of toilet pump makes upflush plumbing possible where it otherwise wouldn’t be, opening up renovation options that would otherwise require smashing through a concrete slab (such as for a basement bathroom or laundry room, or anywhere without direct access to the main sewer line).

90°C Hot Water Tolerance for Durable Motor Protection

The motor and oil chamber can be continuously exposed to 75 °C water or short bursts of up to 90 °C water for up to 4 hours. This kind of heat tolerance is more important than most people realize because hot water from showers, dishwashers, or washing machines routinely flows through a macerating pump system with little regard for its actual temperature at the point of discharge.

Many similar pumps on the market are not rated to handle water this hot for long periods, which can cause premature motor wear or failure as seals and internal components degrade faster than expected. This macerating toilet pump is designed to withstand regular heat exposure, which means a far longer working life in homes that run hot water through connected fixtures, often throughout the day, whether it be frequent showers or a hot-cycle washing machine.

Silver Ion Tank with 99% Odor Inhibition Rate

This macerating toilet pump comes with a special silver-ion tank lining that delivers an odor inhibition rate of up to 99%, effectively preventing odor buildup, a common complaint with lower-quality macerating systems after long-term use. That antimicrobial property keeps the unit running cleanly, eliminating the need for regular manual maintenance to control odor, which is often the biggest reported drawback of older or budget macerating pump designs.

This is a really low-maintenance feature – instead of requiring periodic cleanings or odor treatments, the silver ion tank solves that problem passively as part of the pump’s normal operation. For a bathroom fixture that’s often hidden behind a toilet or in a less accessible location, not having to worry about odor control regularly is a real convenience over the life of the unit, especially in a space that doesn’t get checked or cleaned as often as a main bathroom.

Built-In Check Valve with 2900 RPM Quiet Operation

The motor operates at 2900 RPM and has an internal check valve to prevent liquid backflow, eliminating the need for a separate external valve elsewhere in the system. That built-in design makes for an easier installation and fewer potential leaks or failure points down the road, which is important for a fixture that’s typically installed once and expected to run reliably for years afterward.

Four rubber pads are fitted to reduce operational noise, an important consideration for a toilet pump situated near a bedroom or living space, where pump noise can otherwise be disruptive, especially at night when household noise levels are generally low. The latest sealing structure also improves overall sealing performance, helping the unit operate reliably without leaks at connection points during months of regular operation and repeated cycling.

3 Water Inlets for Toilet, Shower, and Sink Connections

This macerating toilet pump has 3 built-in water inlets, including a 3.5-inch toilet inlet and 1.6-inch inlet for other fixtures, so it has enough connection capacity to handle multiple fixtures from a single unit. This enables one pump to handle a toilet, shower, bathtub, kitchen sink, or laundry connection, eliminating the need for separate pumping systems for each fixture in a bathroom or utility area, thereby simplifying both installation and routine maintenance.

This multi-inlet flexibility makes the pump practical for a full-basement bathroom remodel or a laundry room sink addition, rather than being limited to toilet waste only. Also, consolidating multiple fixtures into a single macerating system simplifies maintenance because there is only one unit to service, rather than several spread across a space, making troubleshooting more difficult if something eventually needs attention.

10.6 lb Macerating Toilet Pump for Compact Installation

It weighs 10.6 pounds and measures about 15.6 x 5.3 x 10.0 inches, so it’s compact enough to fit in shallow spaces, including installation directly behind a toilet, where floor space is at a premium. That small footprint is important for basement bathrooms or tight utility closets where a bulkier pump system would not fit without compromising the room's layout.

The unit is made of PP-GF20 and has an IPX8 waterproof rating and Class B insulation, built to withstand the rigors of constant exposure to water and moisture without degrading over time. This toilet pump provides a practical, space-saving solution for homeowners wanting to add a bathroom or laundry connection in an area without existing plumbing access, without the need for major construction, making a below-grade bathroom addition much more attainable than with traditional plumbing alone.