New

VEVOR Storage Shelves, 5-Tier Adjustable, 1134 kg Capacity, Heavy Duty Garage Storage Shelving Unit, Metal Utility Rack Shelf, for Garage Warehouse Basement Kitchen, 1025 mm W x 517 mm D x 1813 mm H

5 Tier Heavy Duty Shelving with E1 MDF Boards and SPCC Steel Frame 

This 5 tier heavy duty shelving has an SPCC carbon steel frame and E1 MDF board shelf panels. The SPCC carbon steel frame provides structural rigidity, and the E1 MDF board shelf panels give each tier a flat, smooth surface for storing bins, appliances, and boxed supplies securely. While E1 MDF meets formaldehyde emission standards for indoor use, it is also suitable for use in garages, workshops, kitchens, and storage rooms.

The SPCC carbon steel frame is designed to support a total load of 1134 kg (2,500 lbs) during normal use. Cold-rolled SPCC steel provides better dimensional consistency and a smoother surface than typical hot-rolled steel. The steel frame and MDF panels work together to make a system that is strong enough for heavy-duty storage and looks good enough for homes and stores.

226.8 kg Per Shelf Capacity for Tools, Bins, Appliances, and Equipment 

The 5 tier heavy duty shelving provides five levels, each rated to support up to 226.8 kg (500 lbs), which means that garage workshops, business warehouses, and busy storage rooms can all use them. It is safe to load each level to its fullest without worrying about the structure breaking. This capacity is suitable for heavy power tools, stacked bins, large appliances, and boxed equipment. 

The steel frame's total load capacity of 1134 kg is distributed across multiple points rather than concentrated at a single point. With the upright connector accessory, you can link two units next to each other to make the whole thing more stable and less likely to shake side to side when it is heavy. 

Gourd-Shaped Slot System for Customizable Shelf Height and Spacing 

The vertical uprights have gourd-shaped slots that let you move each shelf beam to a different position by lifting it and placing it in the appropriate slot. The gourd's shape—wider when open and narrower when closed—holds the beam safely under load without a separate clip or fastener. This self-locking feature keeps shelf positions stable while you use them, but you can still move them easily when your storage needs change.

Adjustable spacing lets you put tall items, like stacked toolboxes and jerry cans, on the lower levels with plenty of room, while smaller items can make good use of the top levels that are closer together. This per-tier planning makes the storage space more useful than with fixed-height options, where each tier sits at the same distance from the others. The adjustable system can be used by people whose inventory changes with the seasons or whose storage categories are different sizes. 

Snap-On Assembly with Rubber Mallet and Gloves for Quick One-Person Setup 

The 5 tier heavy duty shelving features a snap-on assembly system that requires no screws, nuts, or bolts. You can press and click the parts into place with your hands and focused rubber mallet taps. You do not need power tools or any experience putting things together. The box comes with a rubber mallet and gloves, so you can start assembling it as soon as you open it, without needing any other tools.

Rather than fastener torque, snap connections lock each joint mechanically. This way, the frame does not come loose over time from vibrations and repeated loading cycles. This design helps maintain frame stability and shelf alignment during long-term use. The structure fits together easily for one person working alone, without needing a second person to hold parts during assembly.

Split and Combine Design for Low-Clearance Spaces and Side-by-Side Worktops 

Breaking the unit into two separate, shorter racks at about half the 1813 mm assembled height solves the problem of installing shelves where full height is not possible, such as under stairs, in attic storage, or in basements with low ceilings. The split design provides additional layout flexibility for areas with lower height clearance. 

When you position two shelving units side by side and connect them with the upright connector, they create a wider continuous work surface. You can buy one unit and use it for full-height storage, split low-clearance storage, or a worktop and storage area all in one. 

Anti-Tip Wall Kit and Plastic Foot Pads for a Secured, Floor-Safe Installation 

With the included expansion bolts, rubber sleeves, and washers, the anti-tip kit holds the top of the shelves to the wall. Anchoring to the wall keeps items from falling forward when stored on higher levels. This is important for safety in garages and workshops where heavy things are kept at chest height. 

Plastic foot pads at the base of each upright help improve stability and reduce unwanted movement during loading and unloading. These pads also act as a cushion to protect finished concrete, tile, or laminate. If the look of the floor is important, like in kitchens or stores, the foot pads keep the floor surface under the unit without the need for adhesive mat solutions.

5 Tier Heavy Duty Shelving for Garages, Workshops, Warehouses, and Retail Stores 

The E1 MDF panels, SPCC steel frame, and 1134 kg total capacity qualify this 5 tier heavy duty shelving unit across a broader range of environments than standard garage shelving typically covers. It stores inventory bins efficiently at commercial load capacities. In shops, the flat panel surface keeps items organized without the industrial look of wire racks.

With a 1025 × 517 mm footprint and an 1813 mm height, the unit makes good use of vertical space without taking up too much floor space. The upright connector joins several units into a stable row, and the anti-tip anchoring keeps each unit in place regardless of how the load is distributed.