New

VEVOR Storage Shelves, 5-Tier Adjustable, 907.2 kg Capacity, Heavy Duty Garage Storage Shelving Unit, Metal Utility Rack Shelf, for Kitchen Pantry Basement Bathroom, 720 mm W x 309 mm D x 1520 mm H

5 Tier Storage Shelves with E1 MDF Boards and SPCC Steel Frame for 400 lbs Per Shelf 

Featuring E1-grade MDF shelf boards and an SPCC carbon steel frame, the VEVOR 5 tier storage shelves can support up to 2000 lbs (907.2 kg) across all five levels, with each shelf capable of supporting 400 lbs (181.4 kg). The E1-grade MDF boards meet low formaldehyde emission standards, making the shelves suitable for indoor spaces such as bedrooms, living rooms, kitchens, and utility rooms. 

The solid MDF boards create a flat, continuous surface that supports storage bins, appliances, and stacked items without the gaps found in wire shelving. With dimensions of 28.35×12.17×59.84 in (720×309×1520mm), the unit is small enough to fit into tight spaces like hallway alcoves, bedroom walls, and retail storage areas. Its shallow depth keeps the shelf footprint out of the way of traffic while making the most of the five levels of vertical storage.

Anti-Tip Wall Kit with Expansion Bolts for Secure High-Load Installation Safety 

As a full anti-tip wall anchoring kit with expansion bolts, rubber sleeves, and washers, the shelving unit can be attached to the wall behind it. Wall anchoring is an important safety measure for tall shelving units that are full of heavy items. The anti-tip kit helps reduce the risk of the shelving unit tipping forward if a heavily loaded upper tier is pushed, leaned against, or accidentally bumped during use. 

The kit includes expansion bolts, rubber sleeves, and washers, so no additional mounting hardware is required. This means that you do not need to buy any other hardware for a full fixed installation. The anti-tip anchoring kit turns the shelving unit from a freestanding piece into a structurally secured installation. This is useful in homes with kids, stores with high foot traffic near shelves, and garages where moving cars near freestanding shelves is a risk.

Upright Connector for Joining Two Units into a Stable Combined Storage System 

An upright connector lets you connect two shelf units side by side to create a single, structurally integrated storage system. The connector joins the adjacent upright posts of two shelving units. This prevents the units from moving laterally relative to each other when loaded, which occurs with side-by-side units that are not connected, and makes both frames less stable over time as the load shifts between them during daily use.

When two units are joined together using the upright connector, the new assembly creates a continuous storage surface across both units. This is useful for project work in garages that need a long, flat work platform above storage, and for displays in stores that need a wide surface to match the vertical storage tiers below. The connector installation is the same snap-on, tool-less method as the main shelf assembly.

Gourd-Shaped Slot Adjustable Shelf Height for Customizable Tier Spacing 

The upright posts have gourd-shaped slots that let you move any of the five shelf tiers along the post height without taking apart the tiers that are next to it. With a downward press, the gourd slot shape guides the shelf support into a secure, locked engagement. This creates a positive mechanical lock at the chosen height that prevents upward movement under shelf load without the need for any fasteners to maintain the connection.

Because each tier of the 5 tier storage shelves can be adjusted independently, the spacing can be changed depending on the mix of items being stored at the time of setup. For example, tight spacing can be used for uniform small containers, wide spacing for tall appliances or upright tool storage, or both can be used together in a mixed configuration.

5 Tier Storage Shelves with Snap-On Design for Fast One-Person Assembly 

Each shelf support locks into the gourd-shaped slots with a simple press-fit design. This method requires no screws, nuts, or bolts at any point in the assembly process. The unit comes with a rubber mallet and protective gloves to help with assembly. This means the installer does not need to look for any additional tools or hardware before starting the assembly.

When fully assembled, the interlocking snap-fit structure creates a rigid, non-shaking frame. The connection geometry distributes the load from the shelf surface through the support brackets into the upright posts, so the joints do not need to rely on fastener pressure to remain together under load. Installers setting up several units in a warehouse or store can use the snap-on system to make each unit much easier to assemble and to avoid undertightened fasteners that can loosen bolt-assembled options over time.

Plastic Foot Pads and Split-Combine Format for Floor Protection and Flexible Layouts 

Placing plastic foot pads at the bottom of each upright post improves stability while protecting floor surfaces from scratches. The foot pads also serve as a barrier between the steel upright base and the floor finish, protecting the finish from scratches and marks left by bare steel feet on wood, laminate, and tile floors during installation and use.

The 5 tier storage shelves can also be separated into two shorter storage units for greater layout flexibility. The shelving unit can also be separated into two shorter storage units for greater layout flexibility. This allows you to use the sections independently in areas with lower ceiling clearance or different storage requirements. Connecting the two halves back together requires no extra gear beyond re-engaging the snap connections.