VEVOR Underhoist Support Stand, 3/4 Ton Capacity Under Hoist Jack Stand, Lifting from 1372 to 2130 mm, Bearing Mounted Spin Handle, Self-Locking Threaded Screw, Stable Base, Support Vehicle Components
- Added Stability Under Lifted Vehicles: This underhoist support stand supports up to 1653 lbs and provides reliable assistance under one side of a lifted vehicle. When paired with a lift, it helps reduce tilt, creating a safer setup for underbody service
- Adjustable Height for Repair Tasks: The under hoist jack stand features adjustable height from 54.02" to 83.86". A built-in turning handle allows fine adjustment, ensuring a precise and stable setup for various vehicle clearances and repair needs
- Solid Base for Reliable Support: Crafted with premium steel, a smooth screw rod, and a large, stable base, our under hoist stand evenly distributes loads for reliable support. A protective coating enhances long-term durability, even in busy workshops
- Secure Top Support: The under hoist support stand features a grooved rubber-and-metal top pad to increase friction at the contact point. It limits lateral movement if the vehicle shifts slightly, supporting a more secure and reliable repair environment
- Daily Maintenance Use: Ideal for underbody inspections, suspension service, wheel work, and lift-assisted repairs, this lift jack stand is a practical addition to maintenance tasks. It's well-suited for repair shops, service stations, and personal garages
Frequently Bought Together
Reviews
About this item
3/4 Ton Underhoist Support Stand for Safer Lifted Work
This underhoist support stand, with a 3/4 ton capacity and support for up to 1653 pounds, supports one side of a lifted vehicle. Place the stand beneath a car elevated on a lift to provide extra support while you work. Combined with the lift, it helps reduce tilt, making the setup more stable while you're underneath.
That extra support matters most when working beneath a vehicle. The lift supports the weight, but when you're underneath the vehicle, any shift or flex poses a serious risk. By adding a second support point, the stand reduces movement and provides a safer underbody service setup. It supports the vehicle and lets you work with confidence, but it doesn't replace the lift.
Adjustable 1372 to 2130 mm Height for Any Clearance
The underhoist support stand height adjusts from 1372 mm to 2130 mm (54 to nearly 84 inches). That broad range covers numerous vehicles and lift heights. You can adjust the stand to reach the contact point, whether the car is raised partway or raised on a two-post lift. You don't need a shelf full of fixed-height supports because one stand can handle various vehicles and tasks.
The integrated turning handle precisely dials in the height. The top pad sits exactly where you want it, and you can raise or lower the stand in tiny increments by spinning the handle. Instead of a rough approximation, you get a stable, tight fit thanks to that fine adjustment. After you adjust and set the height, the stand meets the car with the exact clearance needed for the repair.
Self Locking Threaded Screw with Bearing Mounted Handle
The feature that prevents the stand from falling under load is a self locking threaded screw. The screw holds the height once set; when weight is placed on top, the thread won't separate on its own. The stand's self locking mechanism is essential to its safety. It doesn't depend on a potentially slippery pin or catch. The screw itself maintains the position.
The turning handle rotates smoothly even under load because it is bearing-mounted. This smooth action makes dialing in the final millimeters easier than struggling with a stiff handle. Because the screw rod also moves smoothly, raising and lowering is smooth rather than a struggle, and the self locking thread and bearing mounted handle work together to create a sturdy, easily adjustable stand.
Q235A Steel Frame and Wide Base for Even Load Support
Made of Q235A carbon steel, the stand supports more than 1600 pounds without bending. Weaker materials buckle or bend under that type of load, which is precisely what you cannot have when supporting a vehicle. The steel frame is sturdy. Over time, the stand will withstand the wear and tear of a busy workshop, grease, and knocks thanks to a protective coating over the steel.
The large, robust base distributes weight evenly across the floor. Unlike a narrow or flimsy base that concentrates weight and could tip or sink, this wide base helps stabilize the stand. This even distribution keeps an automobile steady and upright when it bears down on the stand. A broad base and a strong steel column provide reliable support beneath an elevated vehicle.
Grooved Rubber Top Pad to Limit Vehicle Movement
The top pad is made of metal and rubber, has a grooved surface, and is intended for gripping. At the point of contact between the stand and the vehicle, the grooved rubber increases friction. More friction means the car is less likely to slide across the pad. It's the difference between a top that the car can drift off of and one that holds.
That grip improves safety. The grooved pad helps keep everything in place and restricts lateral movement if the car shifts even a little during repairs. That resistance to sliding is precisely what you want at the contact point when working beneath an automobile. The rubber also shields the vehicle's underbody from the stand's exposed metal. The top pad prevents the contact point from becoming a weak spot by providing both protection and friction.
Underhoist Support Stand for Shops and Home Garages
Both personal and professional uses are suitable for this underhoist support stand. It deserves a spot in a repair shop, service station, or home garage because it is designed for underbody inspections, suspension maintenance, wheel work, and any lift assisted repair. It provides the support that makes working beneath a car safer. It is not a specialized tool that sits idle; it's a useful piece of maintenance equipment.
The stand weighs 11.3 kg, heavy enough to feel substantial yet light enough to move around the shop and place where you need it. Place a car on the lift, adjust the height, wheel the stand beneath it, and get to work. It gives home mechanic level assistance in the garage. It's a dependable extra point of contact for any underbody job. One stand can improve any workspace in many ways.
