VEVOR 30L Air Compressor, 1.5KW 113L/min at 6.2 Bar Air Compressors, Max 10 Bar Pressure Oil-Free Compressor Tank for Auto Repair, Tire Inflation, Spray Painting, Woodwork Nailing

VEVOR 30L Air Compressor Features 113L/min Air Delivery with 30L Tank Capacity 

This VEVOR 30L air compressor features advanced piston technology, delivering 113 liters of air per minute at 6.2 bar. The reliable 2HP 1.5kW motor can reach a maximum pressure of 10 bar in just 2.35 minutes. This makes sure that it can deliver air quickly, steadily, and effectively for a wide range of pneumatic chores. The 8-gallon (30L) tank keeps the air flow steady, which lowers the number of times the motor cycles.

It operates at 4 SCFM at 90 PSI and maintains the same level of performance even when the load changes. It works with normal European electrical systems thanks to its single-phase AC 230V 50Hz power source. The oil-free design not only provides clean, compressed air suitable for spray painting and finish work, but also makes maintenance easier. 

Oil Free Compression Technology with 30L Air Compressor Maintenance Elimination 

This oil-free 30L air compressor delivers clean, pure, and steady compressed air, free of oil contamination, unlike traditional oil pumps. The oil-free design stops oil from carrying over and damaging paint finishes, pneumatic tools, and finished goods. After thousands of hours of use, the sealed compression cylinder continues to work well, with no loss of efficiency due to oil.

The motor's maintenance-free operation extends its lifespan and saves money on oil changes, filter replacements, and disposal costs. The compressor noise level is relatively low, and the output specifications remain the same over long duty cycles.

2HP 1.5kW Motor Power with Built-In Cooling Fan System 

The 2-horsepower (1.5kW) motor provides steady power for tough workshop tasks, and the built-in cooling fan helps dissipate heat so the machine does not get too hot during extended use. In just 2.35 minutes, the motor quickly fills the tank with air and raises the pressure to 10 bar. The cooling system prevents heat buildup, improving performance stability during continuous use.

The efficient motor design uses AC230V 50Hz single-phase power to produce the most compressed air. The built-in thermal management system extends motor life by reducing the risk of temperature-related component failure.

Reinforced 2.5mm Carbon Steel Tank with Powder-Coated Corrosion Protection 

The carbon-steel tank on this 30L air compressor is 2.5 mm thick, providing greater resistance to pressure and structural stability at a maximum pressure of 10 bar. The powder-coated surface is highly rust-resistant, so it will last a long time and help prevent air leaks. The reinforced tank design improves overall strength and safety, and the reinforced structure keeps air from leaking out.

The thicker tank design can withstand harsh workshop conditions, and the corrosion-resistant coating protects the exterior. Expert-level pressure vessels meet safety standards for dependable use, and their seamless welds ensure long-term structural stability.

Stable Operation Design with Three Large Non-Slip Foot Pads 

Three large foot pads provide a firm, non-slip base, keeping the air compressor steady and reducing vibrations for better operation. The vibration-damping design keeps the equipment from moving while it is working, reducing noise transfer. You can use it safely on a variety of workshop floor surfaces because its stable base design prevents tipping.

The compact vertical footprint measures 14.2 × 13.4 × 25.6 inches (360 × 340 × 650mm), minimizing floor space requirements, while the 30L tank provides substantial air storage. The design saves space and makes it easy to reach controls and connections, even in crowded garages, workshops, and mobile service situations.

Broad Compatibility with Pneumatic Tools for Light-Duty Workshop Applications 

Fits air nail guns, air sanders, spray guns, air blow guns, tire inflators, and other pneumatic tools for a variety of jobs in the workshop. The flow rate of 113L/min at 6.2 bar and 4 SCFM at 90 PSI works for most home and light-duty commercial pneumatic needs. It is great for fixing cars, spray painting, nailing woodwork projects, doing DIY projects, cleaning out dust, and remodeling homes.

The clean, oil-free airflow maintains cleanliness while delivering good results for finishing and painting tasks. The system powers pneumatic nailers for trim carpentry, spray guns for painting projects, impact tools for automotive work, and tire inflation equipment. The pressure range can handle everything from fine finishing work to demanding tasks.

Integrated Safety Features with Automatic Pressure Relief Valve 

The thermal motor protection, automatic pressure relief valve, and pressure switch cutoff are just a few of the safety systems that keep both the tools and the people who use them safe. The safety valve automatically reduces excess pressure, preventing the tank from exceeding a safe level. The system operates reliably because it meets European safety standards for pressure vessels.

When the tank pressure reaches its highest setting, the automatic shutoff stops the motor. This saves energy and prevents wear. Pressure indicators make it easy to monitor the system's operational state, and an emergency shutoff button lets you shut it off quickly.

Professional Construction Quality with 49.8-Pound Durable Build 

The sturdy build weighs 49.8 pounds (22.6 kg), providing stable support during use while still being easy to move around in the workshop. The oil-free vertical air compressor is designed with high-quality parts that ensure reliable operation over extended use. The system is designed for reliable, long-term operation with minimal upkeep.

Durable connections and fittings prevent air leaks, and standard thread sizes ensure that common pneumatic tools will work with them. The high-efficiency compressor provides a steady flow of air to support pneumatic tasks and make work more efficient in areas like car repair, woodworking, and remodeling.