Deals

VEVOR Electric Hoist Manual Trolley, 1 Ton Load Capacity for PA600 PA700 PA800 PA900 PA1000, Push Beam Trolley with Dual Wheels, 68-110 mm Adjustable Beam Flange Width for Straight & Curved I-Beam

1 Ton Push Beam Trolley with 2200 lbs Load Capacity for Heavy Work

This 1 ton push beam trolley is designed to move heavy loads. Up to 2,200 pounds, or 998 kg, or nearly a metric ton, can be carried by it. That rating covers most lifting tasks in garages and workshops, including heavy machinery parts and engine blocks. The trolley allows the load to roll sideways rather than remain stationary when you mount the trolley on an overhead beam and hang your hoist from it.

This kind of trolley is designed to move horizontally. A hoist cannot move a load left or right on its own; it can only lift straight up and down. You can raise an engine off a stand, roll it down the beam, and place it over a workbench by pairing it with this trolley. Before you begin, you will know the maximum load you can move thanks to the 998 kg limit.

68-110 mm Adjustable Flange Width for Straight and Curved I-Beams

The trolley adjusts to fit your existing beam. The flange width ranges from 68 to 110 mm (2.68 to 4.33 inches). You can add or remove the included spacers and sleeves to adjust the width. This means that instead of matching a single fixed width, one trolley can work with a variety of I-beam and H-beam sizes.

Because beams differ from shop to shop, this flexibility is important. A warehouse two doors down may have a different beam flange than a garage. The adjustable range lets you secure the beam you're working with. It also follows a track that curves around a corner because it handles both straight and curved I-beams. The trolley rolls smoothly and the hoist moves without catching or binding when the spacing is correct.

Q235 Carbon Steel Body for Stable, Deformation-Resistant Lifting

The frame is made from Q235 carbon steel, a high-strength material used for structural load-bearing components. Cheaper trolleys may flex or bend under a heavy load, throwing off the roll and stressing the beam. This one maintains its shape. The steel body resists deformation that can eventually damage lifting equipment and stays stable when a full load is suspended from it.

This stability extends beyond the trolley's longevity. Because a frame that bends under load can suddenly shift weight or slip off the beam, it poses a safety risk. The load stays where you place it while it rolls because Q235 steel provides a stiff, reliable platform. With a 2,200 lb engine, this build makes the difference between a tool you can rely on and one you have to watch anxiously every time you use it in the shop.

Fits PA600 to PA1000 Electric Hoists for Horizontal Load Movement

This 1 ton push beam trolley is designed for use with the PA600, PA700, PA800, PA900, and PA1000 series of electric hoists. This trolley pairs with those hoists. The trolley handles sideways travel, while the hoist handles the vertical lift. When combined, they create a complete material-handling setup from an overhead beam.

Push and stop are the basic controls. The load rolls when you push it along the beam, and it stays in place when you stop. That push-and-stop action gives you direct positioning control, letting you align a load over the right spot before lowering it. That hands-on control beats fighting a load that only moves up and down when accuracy matters, such as lowering an engine back into a bay.

Cast Steel Dual Wheels with Precision Bearings for Smooth Rolling

The wheels and bearings determine how smoothly a trolley rolls, and this one has large-diameter cast steel wheels and precision bearings. The large wheels roll over the beam with less resistance and spread the load. The friction that causes less expensive trolleys to jerk or stick when you push them is reduced by the precision bearings. Instead of a lurching load, you get steady, even movement.

The dual-wheel design adds balance. The 1 ton push beam trolley tracks straight along the beam thanks to two wheels on each side, which also distribute the weight instead of putting it all on one spot. This reduces wear and maintains consistent rolling, even under heavy loads. Smooth, predictable rolling isn't a luxury when you are moving heavy loads across an overhead beam. Accidents happen when a bearing sticks or jerks mid-travel, so bearing quality is crucial.

21.8 lbs Compact 1 Ton Push Beam Trolley for Garage and Warehouse Use

This 1 ton push beam trolley is light for a tool that can move a full ton. It measures 13.98 x 7.87 x 7.28 inches and weighs 21.8 pounds (9.9 kg). Because of its size, you can easily lift it to the beam, mount it yourself, and store it on a shelf once you're done. Before you even begin the task, you are not wrestling a large piece of steel into position.

Because of its small size, it works in a variety of settings. It manages drivetrain maintenance and engine lifting in a garage. It moves heavy machinery around in a workshop. It moves material along a beam track in a warehouse for loading and staging. The same tool increases heavy-lifting flexibility without requiring a permanent crane in any of the three. You can mount it, use it, remove it, and move it to the next beam.