Deals

VEVOR EV Charger Extension Cable, 32Amp 10 m Max 22 kW Extension Cord Compatible with All Type 2 Electric Vehicle Chargers, 3-Phase AC 480V 50Hz IP65 Heavy Duty Car Charging Cable with Carrying Bag

10m Type 2 EV Cable Extension with 22kW, 32A Power

This 10m Type 2 EV cable extension is rated to operate on a three-phase 480V AC system at 32A, with a maximum power output of 22kW, which is twice the capacity of the lower-tier 16A/11kW version in the same product line. The higher power rating makes it a better choice if you want to minimize charging time when using an extension cable, rather than accepting a slower charge to gain extra reach.

It has an IEC 62196 male plug on one end and a female socket on the other, so you can plug it into your current charging setup and extend it without modifying your main charging cable. If you’ve got a car that can charge at a faster rate and want the extension cable to match that rather than be the weak link in the chain, this Type 2 EV cable extension gives you the full output rather than slowing down the rate of charge, even on cars that can draw close to the maximum rated capacity of the cable.

Full 10-Meter Reach for Extended Charging Flexibility

This extension cable provides a full 10 meters of reach, which is just enough to bridge the gap between an awkwardly placed charging station and where a vehicle actually needs to park. That length will also be useful for properties where chargers are located farther from the driveway than is ideal, or for public charging points across Europe, where station locations do not always conveniently match available parking.

This 10m Type 2 EV cable extension, with a higher 22kW power rating, means drivers don’t have to compromise between extra reach and faster charging; they get both in one cable. If you’ve ever had to sacrifice charging speed to get a cable long enough, this version avoids that compromise, making it a more practical long-term solution than settling for a shorter, lower-capacity cable.

Six-Core TPU Cable with Thick 6mm² Wire Gauge

This cable consists of 6 cores: 5 x 6 mm2 wires and 1 x 0.5 mm2 wire. This is a considerably thicker gauge than the 2.5 mm² wiring used on the lower-powered 16A extension cable. The cable is rated for 32A, but you need a thicker gauge to safely carry the higher current without excess heat buildup or resistance across the full 10-meter length, which matters more as the cable length increases.

The cable pairs are wrapped in a fire-resistant TPU outer layer, with a thicker copper build and the same durability features found across this extension cable lineup. This Type 2 EV cable extension is made with high-grade copper and robust PC and ABS housing components to ensure it can reliably handle higher current loads during repeated daily use, without the wear and degradation that a thinner-gauge cable would experience under the same conditions.

IP65 Protection for -30°C to 50°C Operation

The extension cable has an IP65 rating for dust and water resistance, so it is well protected against rain and dust when used outdoors. It’s the level of protection that will guard against the normal weather conditions a charging cable will face, no matter how much power flows through it during a charging session or how long that session lasts.

The cable is rated for operation in temperatures from -30°C to 50°C (-22°F to 122°F), allowing it to withstand extreme cold and high heat while remaining safe and functional. The 10m Type 2 EV cable extension provides reliable operation across a broad spectrum of seasonal conditions, from a winter storm to a summer heat wave, rain or shine, with no special precautions required from the driver.

Ergonomic Grip with Male Plug and Female Socket Design

The male IEC 62196 plug attaches to the existing charging station cable, and the female socket at the other end accepts the standard Type 2 vehicle connector, allowing this extension cable to plug into the charging chain without disturbing the original setup. The same plug-and-socket configuration is employed by both power tiers of this extension cable family, so the two versions will be familiar to use, even though they have different power ratings.

The connector housing has an ergonomic grip for smooth, effortless plugging and unplugging, even with the added bulk of the thicker 6 mm² wiring in this higher-power version. The cable is a little thicker and heavier than the low-power cable. Still, the thoughtful grip design makes it comfortable for daily use by drivers who handle it regularly, especially during the colder months, when handling stiff cables can be a hassle.

12.35 lbs, 10 m Type 2 EV Cable Extension Complete Kit

This 10m Type 2 EV cable extension is much heavier than the 16A version, weighing 12.35 lbs (5.6 kg), primarily due to the thicker wire gauge required to support a higher 22kW power rating. Drivers who have an actual need for the faster charging speed this version provides over the lighter, lower-powered version will find that extra weight a fair trade-off, especially for those charging vehicles with larger battery packs that benefit most from higher charging rates.

Also included is a carrying bag for storage, a cleaning cloth to keep connectors dust-free, and a cable tie for cord management, so you have everything you need to keep the cable organized between uses. For drivers looking for charging speed and extended reach, this 10m Type 2 EV cable extension is the higher-capacity option in this product lineup, without compromising any of the weatherproofing or durability features available across the entire range. This makes it a reliable choice for frequent home use and occasional travel charging needs.