Deals

VEVOR 15L Ultrasonic Cleaner Jewelry Cleaner with Heater Timer for Jewelry Cleaning Knob Control Eyeglass Rings Dentures Music Instruments

15 Liter Ultrasonic Cleaner with 40kHz Frequency for Deep Surface Cleaning 

This VEVOR 15 liter ultrasonic cleaner uses industrial-grade transducers operating at 40kHz, producing a higher density of cavitation activity compared to many 28kHz units. This means the bubble action is finer and denser throughout the tank. When these bubbles hit submerged surfaces, they pop, physically removing oil, wax, stains, and fine particles from blind holes, long channels, crevices, and surfaces with complex shapes that basic tools cannot reach.

The 40kHz frequency is also much quieter than lower-frequency ultrasonic waves. This makes the unit easier to use in shared workspaces, such as dental clinics, jewelry workshops, and optical shops. Items come out completely clean, with no wear or damage to the surface. This process can restore jewelry, glasses, musical instruments, and small mechanical parts to nearly their original condition in minutes, without the need to clean them by hand.

304 Stainless Steel Tank for Superior Corrosion and Leak-Free Durability 

The 15L tank is made of 304 stainless steel, which is more resistant than lower-grade stainless steel to alkaline solutions, organic acids, and artificial acids commonly used in professional cleaning. This grade of material is chosen because it can withstand daily use at high temperatures and in detergent solutions without breaking down or rusting. The tank's multi-seam construction helps reduce the risk of leakage during operation.

The 201 stainless steel lid is also resistant to heat and rust, so it keeps the heat in and makes less noise while it is operating. It can hold a lot of jewelry, glasses, teeth, musical instruments, and small parts at once because the basket is 300x270x130mm and holds up to 15L. This reduces the number of cycles required and boosts overall throughput for business activities compared to smaller units.

360W Industrial Transducer for High-Cavitation Cleaning Performance 

The industrial-grade transducers deliver 360W of ultrasonic power, which creates strong, steady cavitation throughout the 15L tank. With the output level matched to the tank capacity, it produces enough power to remove tough grime, oxidation, wax deposits, and biological residue from complicated workpiece surfaces without damaging delicate items like glasses and jewelry.

Transducers are designed to perform consistently during routine cleaning tasks. This means the unit can be used in dental clinics, workshops, labs, and other professional settings. Most of the time, water is enough for everyday cleaning. However, a small bit of detergent can help loosen grease, oil, and other tough residues. Ultrasonic cleaning can get to places that are hard to scrub by hand. This makes it easier to clean surfaces with many small details, complex shapes, and narrow pathways. 

400W Heating Element with 20–80°C Adjustment for Faster Contaminant Removal 

The 400W heating element lets users set the liquid temperature from 20°C to 80°C, helping them achieve the best cleaning results for the type of dirt they are dealing with. Higher temperatures weaken the bonds between oil and wax and between oil and surfaces, accelerate detergent action, and speed up the overall cleaning process. This yields better per-cycle results than cold-water cleaning alone. Heating and ultrasonic operation occur simultaneously, without waiting for preheating.

Throughout the 0–30-minute cycle, the microchip-controlled device maintains a stable temperature. In particular, this heating feature works well for cleaning highly contaminated auto parts, hardened grease on mechanical parts, and biological residue on dental tools. Heat helps break down contaminants more quickly in these cases. The 400W output efficiently reaches the target temperatures throughout the entire 15L volume without excessive power draw.

Dual Knob Control Panel with Drain Valve for Effortless Daily Operation 

Two mechanical knobs let you directly and tactilely control the heating temperature and working time. The simple interface allows immediate operation without digital setup and can be used right away without reading instructions. As the timer runs out, the microchip-controlled system turns off instantly, keeping the settings you choose for the whole cycle. When workers need to start cycles quickly, this simple way of controlling the machine works well in high-volume professional settings.

The two side handles make it easy to move the unit, even when the 15L tank is full. The machine remains stable during operation on most work surfaces while running thanks to four non-slip rubber feet. The adjustable drain valve on the right side lets you empty the tank slowly and safely after each session, without lifting or tilting the machine. The top lid keeps heat in and noise out during the cycle.

15 Liter Ultrasonic Cleaner Certified for Lab, Dental, and Home Use 

CE, FCC, and RoHS certifications indicate that this 15 liter ultrasonic cleaner is safe to use in controlled professional settings. People trust it in dental clinics, optical shops, jewelry workshops, auto garages, and labs that work in biology, medical, laboratory, agricultural, and food-related fields. It is great for batch processing, which means cleaning many things at once in any of these professional settings, thanks to the big 15L tank capacity.

This machine can clean items such as earrings, chains, diamonds, sunglasses, dentures, razor blades, forks, knives, and valves without scratching them. The unit is 14" long, 13" wide, and 11.2" high, and it is heavy enough to stay stable while working, yet still easy to move. When used in a business setting with multiple daily cycles, or occasionally at home for deep cleaning, this VEVOR unit delivers consistent cleaning performance across all supported applications.