VEVOR Macerator Pump, 1200W, 180 L/min(48 GPM) Flow, 33 ft/10 m Head, Macerator Sewerage Toilet Pump with 4 Water Inlets, Waste Water Disposal Upflush Machine for Toilet, Basement, Shower, Sink, Laundry, Bathtub

Macerator Sewerage Pump with 1200W Motor and 48 GPM Flow

This macerator sewerage pump is designed for high output, powered by a 1.6 HP, 1200W motor, delivering a maximum flow rate of 48 GPM (180 LPM). This is a big step up from the smaller 500W macerator units and means this version is better suited for larger households, multi-fixture installations, or any setup where there's regularly more wastewater volume to handle than a standard pump can comfortably manage.

The higher flow rate means that the toilet flushes reliably even under heavy daily use. There is enough reserve capacity to handle simultaneous draining from multiple connected fixtures without performance dropping off. If you are putting in a full-basement bathroom with a washer hookup, the extra punch of this macerator sewage pump gives you real headroom that smaller units don’t have, especially at peak times when several fixtures might be draining at once.

33 ft Head Lift for High-Capacity Wastewater Drainage

This pump can move wastewater more efficiently across a wider range of layouts than lower-powered alternatives, including demanding installations where the discharge point is much higher than the pump itself, with a maximum head lift of 33 ft (10m). That added lift capacity creates renovation possibilities in basements, multi-level homes, or properties with unusually long horizontal runs to the main sewer line.

A head lift figure like this is most critical when a smaller pump would struggle to lift wastewater high enough to reach the connection point. That extra lift margin built in means fewer compromises when planning where a new bathroom or laundry can go, even in homes with unconventional plumbing layouts or older infrastructure, for more demanding installations.

Delay Start Function for Extended Copper Motor Life

One of the most common causes of wear and tear on pump motors over time is starting the motor too often. This macerator sewerage pump has a delayed-start facility to prevent this. This feature goes a long way toward extending the service life of the copper motor compared to units without this built-in start management by smoothing the frequency of cycling the motor on and off.

The motor itself is housed in an IPX8-rated, oil-filled, copper enclosure and is rated to handle wastewater temperatures of up to 75°C (167°F) from appliances such as washing machines and dishwashers. Combined with the delay-start function that builds quality, this pump has a meaningfully longer expected service life than a standard macerator motor running without any cycling protection, especially in households where the system is used multiple times throughout the day.

Stainless Steel Anti-Clog Blades Grind Hair and Debris

The stainless steel grinding blades, coupled with the powerful copper motor, are designed to break down hair and debris before they travel through the system, directly addressing one of the most common causes of clogs in household macerator pumps. That kind of targeted grinding ability is important for bathroom installations, where hair buildup is a near-constant problem for any drainage system over time, no matter how carefully a household manages it.

This sewerage pump grinds waste into smaller particles before it is pumped out, reducing strain on downstream plumbing and helping prevent blockages that lead to service calls or system failures. For multi-person households that shower daily and share a single drainage system, this anti-clog design provides real peace of mind through months and years of regular use, reducing the risk of an unforeseen plumbing emergency.

Silver Ion Tank with 99% Odor Inhibition Rate

This pump has a specially designed silver-ion water tank with an odor-inhibition rate of up to 99%, stopping the smell build-up that is a common long-term issue with lower-quality macerator systems. This antimicrobial property is passive, so there is no need for regular cleaning or treatment to keep the unit from developing unpleasant odors over time.

That kind of low-maintenance odor control is a real convenience for a macerator sewerage pump installed in a less-frequently-checked space, such as behind a basement toilet or in a laundry room. The unit is designed to function dependably and efficiently without frequent hands-on attention from the homeowner, which is critical in areas outside the regular living space, and it includes an anti-clog blade system.

22.93 lbs Macerator Sewerage Pump with 4 Water Inlets

At 22.93 lbs and roughly 17.32 x 7.48 x 12.2 inches, the macerator sewerage pump is heavier and noticeably larger than the smaller 500W units in the same product family, but its weight reflects its higher-output motor and stronger overall build. For installations that really need the added power, that extra size is a fair trade-off for the giant boost in flow rate and head lift this version provides.

This pump is designed to service a toilet, washbasin, shower, and bathtub all from a single unit, with four water inlets, one 89mm toilet connection, and three 40mm inlets. This makes it a practical all-in-one solution for a full bathroom or utility room setup. This sewerage pump has a higher capacity and is suitable for larger installations or higher-demand households, so you don’t need a second unit to take up the slack. This feature makes installation easier as well as any future maintenance down the line.