New

VEVOR Storage Shelves, 5-Tier Adjustable, 1360.8 kg Capacity, Heavy Duty Garage Storage Shelving Unit, Metal Utility Rack Shelf, for Kitchen Pantry Basement Bathroom, 923 mm W x 309 mm D x 1813 mm H

Snap-On Tool-Free Assembly with Rubber Mallet and Gloves Included for Fast Solo Setup 

Setting up the VEVOR 5-tier freestanding storage shelving unit requires no screws, bolts, or specialist tools at any stage of the build. With the rubber mallet and safety gloves included, one person can easily snap each frame connection into the matching post slot until it seats firmly. Compared with bolt-assembled shelving, the snap-fit design eliminates concerns about uneven tightening or loose fasteners. 

After assembly, the tight-fitting snap structure forms a stable frame that does not shake. The connection geometry transfers weight from the shelf surface to the shelf supports, then to the upright posts, without requiring fastener pressure to keep the joint solid. Installers can set up multiple units at once in a garage, retail stockroom, or basement storage area. 

Plastic Foot Pads and Anti-Tip Wall Kit for Stable, Floor-Friendly Installation 

With four plastic foot pads already attached under the base uprights, the steel frame does not scratch tile, laminate, hardwood, or vinyl floors where it touches them during installation or afterward. The pads also help improve stability and reduce unwanted movement during loading and unloading. This is a useful safety feature when the upper shelves are being stocked with heavy items.

Composed of expansion bolts, rubber sleeves, and washers, the anti-tip wall anchoring kit secures the frame's top to the wall behind the unit, helping to stabilize the shelving unit. When the unit is fully loaded to its 3000 lb maximum capacity with heavy items mostly on the upper levels, wall anchoring helps reduce the risk of tipping during everyday use. 

5-Tier Freestanding Storage Shelving Unit with Gourd-Slot Adjustment Across All Tiers 

The straight posts have gourd-shaped slots that let you move any of the five shelf tiers separately to preset positions along the uprights. You can do this adjustment without tools or taking apart the tiers above or below the one you are moving. If you press the shelf support bracket down into the locked position, the gourd-shaped slot guides it into the wider opening. As you press the bracket downward, it narrows, creating a mechanical engagement that stops it from moving up under load without the need for a separate locking fastener.

With this independent tier adjustability, the initial setup can change the spacing configuration to fit the specific storage contents. For example, closer spacing is better for uniform small containers that would take up too much vertical space in a wider setting. In comparison, wider spacing is better for tall appliances, upright equipment cases, or standing tools that need more height clearance. Each shelf can be repositioned quickly during setup to accommodate different storage needs. 

E1 MDF Boards on SPCC Steel Frame for 600 lbs Per Shelf and 3000 lbs Total Capacity 

The 5-tier freestanding storage shelving unit uses MDF boards that meet E1-grade standards for low formaldehyde emissions, making them suitable for living rooms, retail spaces, kitchens, and bedrooms. The solid MDF surface provides a flat, continuous platform that supports small packages, jars, bottles, and other compact items consistently across the shelf's full width. This is a big practical benefit in kitchens, pantries, and stores, where small items need a stable base to sit on without tipping over or falling through gaps.

The SPCC carbon steel frame supports the structure from the top level down to the floor contact points. It is designed to support the rated load while maintaining structural stability during normal use. After being powder-coated black, the steel frame of this 5-tier freestanding storage shelving unit helps resist rust and corrosion during normal indoor and sheltered use. 

Split and Combine Format for Low-Clearance Spaces and Side-by-Side Work Surfaces 

The 5-tier freestanding storage shelving unit can be split into two shorter units by undoing the snap connections between the upright posts. This can be done without any tools and creates two fully functional units that can stand alone, allowing them to be used independently in spaces with lower height clearance. In places where the full 71.38-inch height is too high, like under stairs, in attic storage rooms with sloped ceilings, or in basements with exposed beams that limit the unit's useful height at certain wall positions, this split format makes installation easy.

You can join the two units by placing them side by side. The included upright connector locks the two frames together into a single rack by bridging the posts next to each other. When positioned side by side and connected, the two shelving units create a wider continuous storage surface. 

5-Tier Freestanding Storage Shelving Unit Suited for Home, Retail, and Garage Environments 

The E1 MDF boards, powder-coated SPCC steel frame, 3000 lb total capacity, and 71.38 in tall five-tier configuration of this shelving unit make it useful for a wide range of home and light commercial storage situations, so you do not have to buy separate units for each room. It organizes books, decorations, and everyday items in living rooms and bedrooms across the five visible levels. 

In garages and workshops, each shelf supports up to 600 lbs for storing heavy equipment cases, automotive supplies, and power tools. The wide 36.34-inch shelf surface can hold full case packs at each level, which is great for retail stockrooms and commercial storage areas because it keeps inventory organized, visible, and easy to access from the front without reaching behind items on the shelf.