Deals

VEVOR Type 2 to Type 2 EV Charging Cable, 32Amp, 7kW 5 Meters Single Phase Electric Vehicle Car Charging Cable, IP66 Waterproof w Carry Bag, for IEC62196 EV & Plug-in Hybrid Electric Vehicle, CE&TUV

Type 2 to Type 2 EV Cable with 7kW Single-Phase Power

This Type 2 to Type 2 EV cable is for a single-phase 230V AC system with a maximum power output of 7kW. It’s this single-phase design that makes it the right match for standard home electrical setups, which are far more commonly wired for single-phase power than the three-phase connections demanded by higher-output charging cables in the same product family.

Both ends are designed to IEC 62196 standards, and the connectors can be directly mated between a Type 2 charging point and a Type 2 vehicle port without an adapter. Most residential properties don’t have three-phase electrical service, so this Type 2 to Type 2 EV cable provides a properly matched solution for charging, rather than a higher-capacity cable that the home’s wiring couldn’t actually support in the first place.

32A Current Rating for Standard Home Charging Setups

It’s a single-phase unit, but the 32A rating still allows decent charging speeds within the confines of a single-phase electrical connection. The 32A-rated version has the same current capacity as the 22kW three-phase version in this product line, but it is delivered via single-phase rather than three-phase, which is simpler for most home installations.

The single-phase wiring and full 32A rating make it perfect for overnight home charging, where consistent, reliable power is more important than the fastest possible charging speed. This Type 2 to Type 2 EV cable is more than capable of charging most daily commutes and covering an overnight charge without the need for three-phase service, which many homes just don’t have installed and would require a lot of electrical work to add.

Four-Core All-Copper TPU Cable with Shock Protection

This cable is a 4-core copper structure. Wire gauge is 3x6 mm² + 1x0.75 mm². The outer layer is TPU, which is durable. It’s a four-core design that mirrors the single-phase electrical layout, requiring one fewer conductor than the six-core cables used for three-phase charging while still providing the copper conductivity needed to maintain consistent, efficient 7kW charging without adding unnecessary bulk.

The cable is designed for single-phase use, and a multi-layer wrap provides additional protection against electric shock. The built-in shock protection is just as important here as it is on any higher-capacity version in this lineup because the risks of cable damage or wear don’t scale down just because the power output does, for a cable that’s handled, coiled, and exposed to weather regularly.

IP66 Waterproof Rating for -30°C to 55°C Operation

This Type 2 to Type 2 EV cable is rated IP66 for waterproof and dustproof protection, so it is built to work reliably in rain, snow, or dusty conditions without water or dust affecting performance. That rating is very important for any charging cable used outdoors, whether it’s a single-phase home setup or a more powerful three-phase setup at a public station.

Also, the cable works in a temperature range of -30°C to 55°C (-22°F to 131°F), covering both extreme cold and significant heat without degrading cable performance or safety. This wide operating range is perfect for homeowners who charge overnight in a garage or driveway through the changing seasons, and it means this cable can be trusted in freezing winter nights or hot summer afternoons, without sacrificing safety or charging consistency.

Silver-Plated Copper Contacts Rated for 10,000+ Plug Cycles

The contact bushings on this cable are made from a silver-plated copper alloy, selected for its high conductivity and resistance to corrosion from repeated use. That contact quality is important for a consistent, reliable connection every time the cable is plugged in, which, for a home charging cable, often means daily use over months and years with little thought given to wear.

Rated for over 10,000 plug-and-unplug cycles, and that mechanical life rating comes from serious durability testing, not just a casual estimate. For drivers who plug in this Type 2-to-Type 2 EV cable every night as part of a regular home charging routine, that rated longevity gives real confidence that the connectors will hold up reliably over years of consistent daily use without connection quality degrading.

5.07 lbs Type 2 to Type 2 EV Cable with Carry Case

The Type 2 to Type 2 cable weighs 5.07 lbs (2.3 kg), making it lighter than the three-phase versions in the same product line. This reflects the four-core construction and the cable's lower overall power rating. That lighter weight makes it easier to handle daily, whether you’re leaving it plugged in at a home charge point or coiling it up and putting it away in a garage or trunk after each use.

It also includes a portable storage bag made of impact- and wear-resistant materials to protect the cable when not in use, along with cable ties to keep it neatly coiled after each charge. This is a practical, comfortable, properly matched, lighter daily charging solution for homeowners with a standard single-phase electrical setup who don’t need the higher capacity of a three-phase cable, and it is sized correctly for what most home electrical systems can actually deliver.