VEVOR Macerator Pump, 900W, 180 L/min(48 GPM) Flow, 40 ft/12 m Head, Macerator Sewerage Toilet Pump with 4 Water Inlets, Waste Water Disposal Upflush Machine for Toilet, Basement, Shower, Sink, Laundry, Bathtub

Basement Toilet Pump with 900W Motor and 48 GPM Flow

Basement Toilet Pump 1.2 HP, 900W motor with a maximum flow rate of 48 GPM (180 LPM). That ensures the toilet continues to flush reliably even with heavy use, which is key in a basement bathroom that could see regular traffic from a home gym, guest suite, or finished living area beneath the main floor.

In basement installations, where these systems are often needed to handle wastewater from multiple connected fixtures without the help of gravity that a main-floor bathroom would have, the need for a strong, consistent flow rate is even more critical. The toilet pump is engineered to deliver that output all day long, so whether it’s pumping one flush or several fixtures on a busy day, performance is consistent.

40 ft Head Lift for Maximum Basement Drainage Reach

With a max head lift of 40 ft (12m), this pump stands out among macerator units for basement installations. That’s a substantial number for anyone with a deep basement, an unusually long horizontal run to the main sewer line, or a layout where the point of discharge is well above the pump's installation point.

This head lift style is often the difference between feasibility and infeasibility of installing a basement bathroom without major excavation. If a basement toilet pump doesn’t have sufficient lift capacity, it won’t work in certain configurations. With 40 ft available here, this model handles even difficult basement configurations that lower-lift pumps would struggle with, including homes with unusually deep foundations or older infrastructure.

PCB Delay Function for Quieter, Longer-Lasting Operation

This basement toilet pump has an upgraded PCB delay function, specifically designed to reduce the frequency of pump starts, resulting in quieter operation throughout the day. One of the more common sources of both noise and long-term wear is motor starts, so reducing the amount of cycling is a two-pronged benefit to the system.

This lowered start frequency also contributes to the pump's overall service life, providing a longer service life than pumps without this type of start management. That quieter operation makes a difference for a toilet pump installed near a finished living space, bedroom, or home office below ground level, especially in homes where the basement doubles as a guest room or workspace.

Copper Motor Rated for 75°C Wastewater Handling

The motor is an IPX8-rated, oil-filled, copper design, rated for wastewater temperatures up to 75°C (167°F), suitable for discharge from washing machines and dishwashers. Heat tolerance is important because hot water discharged by connected laundry or kitchen appliances flows straight through the system, and a motor not rated for that temperature range wears out much faster than one designed for it.

Copper motor construction also tends to provide more consistent performance and better heat dissipation over time than lower-quality windings, which is worth considering for a basement toilet pump that needs to run reliably for years with minimal hands-on maintenance. That combination of heat tolerance and rugged construction allows for long-term reliability in a fixture that’s typically installed once and seldom touched again until something eventually needs attention.

4 Water Inlets for Toilet, Sink, Shower, and Tub

The pump has four water feeds: one 89mm feed for toilets and three 40mm feeds for sinks, showers, and baths, all from a single unit. That versatility makes it a great choice for a full-basement bathroom buildout and is not limited to toilet waste installations. All four inlets feed directly into the same internal chamber, so there’s no need for separate macerating mechanisms per fixture.

A single toilet pump that can handle a variety of fixture types makes installation and maintenance easier over the long term, because one unit handles the waste from the entire basement bathroom or utility space. If you’re a homeowner doing a full basement renovation, this inlet flexibility means you don’t have to install separate pumping systems for each fixture, saving you both money and complexity. It also means that a single service call can handle the whole system, rather than having to track down which individual pump is causing the problem.

16.53 lbs Basement Toilet Pump for Reliable Installation

This toilet pump balances its high output with dimensions that fit in a typical basement utility space without being too bulky. At 16.53 lbs and around 17.32 x 6.69 x 12.01 inches, the unit is a good compromise. This design makes it feasible to install it behind a toilet or in a dedicated utility area without major reconfiguration of the surrounding space.

This pump is designed to tackle basement challenges with its PCB delay function, high head lift, and multi-inlet design, and is not intended as a general-purpose macerator unit for basement use. This toilet pump is built for those undertaking a basement bathroom project where lift capacity and reliability are especially important, delivering the dependable performance a below-grade installation requires.