VEVOR Retractable Air Hose Reel, 15m x 9.5mm PVC Air Hose Max 300PSI, Enclosed Air-Compressor Hoses Reel Auto Rewind with 1m Lead in, 180° Swivel Ceiling/Wall Mount for Garages Workshops

Wall Mount Air Hose Reel with 180° Swivel for Garage and Workshop Use 

This VEVOR wall mount air hose reel helps reduce hose tangles, kinks, and trip hazards by keeping the hose stored off the floor and ready for use. Mounted on a fixed wall point, the hose extends to the required length, locks in place, and then retracts when the job is done. This helps keep the work area more organized between jobs. 

From the fixed mounting point, the 180° swivel bracket can rotate a full 180°, directing the hose to different parts of the workshop without moving the reel. If you work on the whole floor of a bigger garage and the compressor is in one corner, this feature is very helpful. The bracket allows installation on the ceiling, wall, or floor. The bracket gives the installer the freedom to put the reel at the height and angle that works best for their work area.

15 m × 9.5 mm PVC Hose Rated to 300 PSI Working Pressure 

The hose is 15 meters long and has an internal diameter of 9.5 mm (3/8"). This is the right size for a retractable wall-mounted application because it matches flow capacity with weight and flexibility. The PVC hose remains lightweight and flexible for everyday workshop use. The hose is rated for a maximum working pressure of 300 PSI, making it suitable for many compressed-air applications. 

PVC does not react with oil and fuel residues common in garages, so the surface does not crack or break down in the workshop. The 3/8" width fits most pneumatic tool fittings used in European workshops, and the included 1/4" BSP fitting lets you connect it directly to the reel on most standard compressor setups without adapters.

Auto-Rewind System with Track Lock for Hands-Free Hose Management 

The spring-driven auto-rewind device pulls the hose back with a light tug and then releases it. You do not have to coil it by hand. The hose winds equally around the drum and rewinds neatly onto the reel. This one-action return is faster and easier to use than manually coiling a loose hose after each use. 

The built-in track lock keeps the hose in place at any length, so the operator doesn't have to maintain tension. This is useful for jobs where a sudden pull-back would pull the tool off the workpiece. The movable stopper provides a mechanical limit that prevents the hose from pulling out beyond the required length. 

Enclosed Plastic Reel Housing with Non-Snag Rollers for Hose Protection 

The reel drum is inside a plastic case that prevents dust, dirt, and other debris from hitting the hose during storage. In a garage where people work, an open loop collects grinding dust, oil mist, and swarf instead of protecting the hose from dust and debris during storage. 

Non-snag guide rollers keep the hose from catching on the housing edge or building up too much force as it goes out and back into the drum. Evenly winding the hose across the full width of the drum makes it last longer by avoiding the stress points that form when it piles up repeatedly in the same spot. The reel weighs 4.97 kg, which is not too heavy for wall mounting without heavy-duty screws.

1 m Lead-In Hose and 1/4" BSP Fitting for Quick Tool Connection 

A 1-meter lead-in hose connects the reel's fixed inlet to the compressor. This provides flexibility between the compressor and the reel. The reel's swivel joint is less stressed when this short fixed piece is in use. Ordinary hose handling does not put stress on the compressor connection, unlike that of the 15-meter working hose.

The 1/4" BSP outlet fitting is the usual thread size for pneumatic tools in European workshops, so it can connect directly to most air guns, impact wrenches, spray guns, tire inflators, and blow guns without the need for adapters. The threaded connection provides a secure, airtight seal. 

Wall Mount Air Hose Reel Rated from -5°C to 45°C for Year-Round Use 

If you keep this wall mount air hose reel in an unheated garage in winter, the PVC hose will not become too stiff to handle, as it can operate in temperatures from -5°C to 45°C. PVC remains flexible down to -5°C, which is cold enough for most garage conditions in northern Europe during winter. If you keep the doors closed in the summer, when temperatures rise significantly, 45°C is a good temperature for use in enclosed workshops.

Temperature changes in a garage do not affect the reel body; it expands and contracts with the seasons without cracking at the mounting points. This means the reel does not need to be taken off the wall and stored indoors during the winter, as it remains permanently attached.

Ceiling, Wall, or Floor Mount Options for Flexible Workshop Installation 

You can mount the bracket on the wall most of the time, but you can also mount it on the ceiling or the floor. Ceiling mounting positions the reel overhead, allowing the hose to drop vertically to the work area and remain completely off the floor along its full extended length. Floor mounting suits situations where wall and ceiling space is occupied or where ground-level access is needed.

All three orientations use the same 180° swivel bracket, rotating to suit the hose exit direction regardless of the mounting surface. Because the reel weighs 4.97 kg, normal wall plugs into masonry or timber framing are strong enough to hold it in place without the need for special hardware. This wall mount air hose reel fits easily between shelves, door frames, and ceiling beams while keeping compressed air within easy reach.