3/8 Cord Capacity and 1855 mm Frame for Large Firewood Storage

The VEVOR machine is 1350 mm high, 1855 mm long, and 715 mm wide. It can hold up to 3/8 cord of logs. That's plenty of space to store and season enough wood for the whole winter in one place. The tall, straight frame makes good use of vertical space. This means a big pile of wood takes up little room on your patio or deck. The holder can hold about 1962 liters of firewood and keeps cut logs off the ground, where mould and rot can grow.

For proper seasoning, air must flow continuously. The stand's open sides let breezes move through the stack, drying the logs evenly. Keep your rotation organized during the burning season by placing freshly cut wood on one end and used wood on the other. The frame can handle the bulk without taking up much room, whether you use up your stock quickly or store some for the months to come. 

Q195 Carbon Steel Metal Firewood Rack for 730 kg Load Strength

With thicker tubular Q195 carbon steel, this metal firewood rack can hold up to 730 kg of wood without bending or bowing. You can safely stack heavy hardwoods like oak and hickory right up to the top rail. The frame will stay strong. One season of heavy use will cause thin wire racks to sag, but the solid steel tubing here will not sag over time.

As the wood is still wet, a high capacity is most important. Freshly split logs are much heavier than fully dried ones. The frame stays rigid even when it is full of green wood because the 730 kg grade gives it a lot of room to spare. The rack weighs about 25 kg, so it is easy to move when empty. But once the logs are on it, it stays put. Because it is balanced, you can use it outside year-round. 

Black Powder-Coated Finish for Rust and Corrosion Resistance

This holder has a black powder-coated finish that covers all the tubes. This protects the steel from water, which is what usually causes outdoor gear to rust. This coating sticks well to metal and doesn't flake or chip like regular paint. It can also stand up to rain, snow, and humidity. That wall helps the rack stay outside all year without rusting or getting dirty.

The matte black color looks good in many settings, from a cabin porch to a sleek modern deck. It also hides scratches and marks made by rough bark, so the frame stays clean even after years of regular use. Since the covering will not peel or rust, you will not have to sand or paint it every year, which lowers your maintenance. The finish stays in good shape with a quick wipe-down every so often. 

Included Carrier Bag for Easy Firewood Transport

Logs are heavy and messy to carry one armful at a time, so VEVOR includes a big bag with this set. You can load several pieces at once, sling it over your shoulder, and make one trip from the rack to your stove. That keeps you from walking back and forth a lot, which wastes time on cold nights.

The bag keeps dirt, bark, and splinters off your floors and clothes because the wood stays inside and doesn't rub against your arms. You are also less likely to trip or drop a log on your foot when you take fewer steps. After use, the bag folds flat and stores nicely next to the frame. Together, the holder and bag make carrying firewood quick and clean instead of a daily job you hate. 

Widened Frame-Style Base for Stable Metal Firewood Rack Support

The wider frame-style base spreads the weight of a full stack over a larger area, making it more stable. The low, stable position of the metal firewood rack keeps it from shaking or falling over, even on windy days when a tall pile would. Single-bar racks that are too narrow tend to wobble as the wood piles up, but this wider layout stays stable.

A stable base does more than just keep the wood safe. It keeps logs from rolling off onto paths, where someone could easily trip. On flat patios or loose dirt, the wide feet spread the weight evenly, so the frame won't sink or lean to one side. Your full load will stay put through storms and normal use, which is very important if the rack is near a fire pit, grill, or seats. 

One-Person Quick Assembly for Versatile Placement

No extra hands or special tools are needed to set it up. The pieces fit together logically, so you can quickly go from taking the rack out of the box to loading it up. You do not have to deal with tricky hardware or unclear instructions, so you can just stack wood.

Once assembled, you can use the holder on porches, in backyards, on patios, around fire pits, in courtyards, in living rooms, and even in apartments. Its straight lines make it look nice inside and it can handle heavy storage work outside. The frame is light enough to move when you rearrange a room, but strong enough to keep working wherever you put it. This metal firewood rack is well worth the money if you want to store your firewood stylishly and reliably.