VEVOR Induction Heater Bolt Removal, 1500W 230V Magnetic Induction Heater Kit, Handheld Nut Buster Tool, Mini Heating Machine for Rusty Screw Removing, Car Garage Repairing Tools with 8 Coil and Box

VEVOR Bolt Induction Heater with 1500W 25-Second Heating Speed for Quick Bolt Removal

This bolt induction heater uses a high-frequency electromagnetic field with 1500W output power to expand stuck or rusted metal in approximately 25 seconds, increasing disassembly speed compared to manual tools and hand-applied heat sources, which would take much longer. The heating is done via magnetic induction, not an open flame, so no water cooling or exposed heat sources are needed, making it safer for use in tight engine bays or cramped garage spaces.

The kit includes eight heating coils in the box, covering fastener diameters from 0.2 to 1.6 inches (5 to 40 mm) across four coil specifications. This range means that the unit can tackle the complex and delicate metal heating challenges, from small screws to larger bolts, bearings, and gears, without requiring separate tools for each fastener size.

Ergonomic Handheld Grip with Unobstructed Visibility for Reduced Wrist Fatigue

The handheld design gives you a more secure, ergonomic grip that reduces wrist fatigue during repeated use, which is key when you're working through multiple stuck fasteners in a single repair session. The handle shape is designed to remain comfortable in the hand even during extended use, reducing strain on technicians who use the tool throughout a full workday in the shop, day in and day out.

Holding the unit keeps the other hand free and provides a better line of sight to the coil and fastener being heated. This unobstructed view makes it easier to properly position the coil around bolts, nuts, or bearings in tight or awkward locations underneath a vehicle or within machinery housings where space and lighting are both limited and clear visibility is most important.

30-Minute Continuous Operation with Automatic Cooling Fan for Extended Use

A cooling fan and an integrated overheating guard protect sensitive internal components during heating and extend the working life of this bolt induction heater through repeated use. The fan is automatic. It turns on automatically, so the operator doesn't have to keep an eye on it or manually turn the fan on mid-job. This allows the workflow to continue in a busy garage environment, with back-to-back repairs throughout the week and multiple jobs.

The unit is designed for extended repair jobs involving multiple fasteners. It has a maximum continuous operating time of 30 minutes without frequent breaks to cool between cycles or to wait for the housing to settle. The longer runtime, combined with automatic fan operation, makes this tool well-suited for busy shop environments, where downtime between jobs should be kept to a minimum throughout the workday.

High-Intensity LED Light with Compact 11-Inch Frame for Clear Close-Up Visibility

The unit has a high-intensity LED light to illuminate low-light work areas, such as the underside of a chassis or inside an engine bay, so technicians can accurately position the coil on the target fastener. This additional visibility is especially handy on rusted, corroded, or heavily stuck parts that are otherwise tough to see clearly during a repair.

It has a compact body measuring 11.0 x 8.1 x 2.8 inches, weighs 6.2 pounds, and comes with a 4.6-foot (1.4-meter) power cord to help keep the tool maneuverable in tight spaces, such as an engine bay or on a workbench. That smaller footprint means the unit is easier to store, carry between jobs, and work with than bulkier heating tools used for such automotive repair tasks on a day-to-day basis.

Lockable Toolbox with 8 Heating Coils in 4 Specifications for Organized Storage

All eight heating coils are stored across four specifications in a lockable 15.2 x 10.8 x 3.9-inch toolbox, ensuring each coil is organized and easy to find between jobs. It prevents coils from being misplaced, scratched, or damaged when the heater is stored with other garage tools, equipment, and service carts in a busy, fast-paced shop setting day after day throughout the week.

The kit is also easier to move from job site to job site or to store on a shelf when not in use because it contains everything needed for a repair in one box. Technicians who handle all types of fasteners every day save time; they'd otherwise waste searching the shop floor for the right attachment by keeping all coil specifications perfectly organized in a single lockable case.

Compact Bolt Induction Heater with Pure Copper Coils for Automotive and Mechanical Repair

This bolt induction heater is designed and engineered to meet the demands of automotive repair and mechanical maintenance and is made primarily of pure copper and ABS. The pure copper coil windings ensure that the magnetic field is generated quickly and consistently, cycle after cycle. The lightweight ABS housing keeps the entire unit easy to handle yet durable enough to withstand regular, repeated use in the shop on a multitude of jobs and tasks, season after season.

It's great for heating thicker, medium-sized workpieces like rusted or stuck mechanical bolts, screws, bearings, gears, and even frozen lathe fasteners that you can't get off with just your hands or hand tools. This bolt induction heater is ideal for garage technicians and mechanical maintenance teams who want to accelerate disassembly without risking damage to adjacent threads, housings, fittings, or other sensitive components.