New

VEVOR Greenhouse Repair Tape 0.15x32 m 0.15 mm Clear Polyethylene Patch, for Plastic Sheeting & Tent Seaming Sealing, Waterproof & Sun-Resistant, Heavy Duty Greenhouse Sheeting Coverings Film Tape

High Tack Adhesive Greenhouse Repair Tape for Firm, Lasting Bonds

The VEVOR greenhouse repair tape features a strong adhesive that sticks firmly to greenhouse film. Use this strong glue to fix holes, tears, and open seams. The patch will not come off or peel back over time. It stays flat against the film because the glue keeps pressure on the whole contact area. The fixed part will not bubble or move around at the edges.

A strong seal also makes it less likely that problems will happen after the film is broken. It keeps the edges from lifting and prevents air and water from escaping your growing space when you press the tape down over a weak spot. Because it holds so well, normal handling and wind will not damage the fix. This reliable fix keeps your plants' limited environment safe.

0.15 mm Thick PE Construction for Tear and Puncture Resistance

With a thickness of 6.3 mil (0.15 mm), this greenhouse repair tape's polyethylene gives each patch real body. Even with its thickness, the PE layer can still bend around bent frames and uneven film. It can also cover damage and take on the stress that caused the tear. The patch does not break when the covering bends due to temperature changes because it has the right strength and give.

The most important factor in a repair's longevity is its thickness. However, the 0.15 mm PE body will not tear or puncture after installation, so the repaired area is usually just as strong as the rest of the sheet. Without load, the weak spot cannot reopen because the material stays in shape. This applies whether you are fixing a long split or a small pinhole.

0.15 x 32 m Roll Size for Covering Holes, Tears, and Seams

Each roll is 0.15 m wide and 32 m long, which is a good amount of 15 cm wide tape for a full season of repairs. The 32 meter length makes it unlikely you will run out of tape mid job. The width is just the right size to cover most holes and run along seams without leaving gaps. You only need to cut the piece you want for each fix, and you'll still have plenty left on the roll.

The long roll size works well for both small fixes and bigger projects. For a small hole, a short strip will do. For a long tear, you can pull out a long piece and lay it down all at once. The small roll (about 115 x 150 mm) is easy to store on a shelf or in a tool bag, so you can always have patching material on hand when the covering needs it.

Weatherproof Greenhouse Repair Tape for Outdoor Rain and Sun Exposure

This greenhouse repair tape is built to handle outdoor weather. It handles rain without the glue coming off, and it withstands harsh sun that can dry out or weaken a weaker patch. Because it handles both heat and cold, the repair stays stable whether your building gets hot during the day or cool at night.

Each fix lasts longer outside because it works in all kinds of weather. Strong sunlight and water can damage patches, so using tape that handles both will keep your repair looking and working well longer. You won't have to redo the same area as often, so you can trust your covering to stay in place even when the weather changes.

Transparent Clear Finish for Minimal Light Transmission Loss

The tape is clear and see through, so it does not stand out as a repair. It blends in with regular greenhouse film. Once pressed down, it blends into the surface, leaving the covering smooth and clean with no dark spots. That clean finish is nice for people who care about how their growing space looks.

It is not just about how things look. Since light drives plant growth inside the structure, a see-through patch blocks less light than solid tape would. The undamaged film around the repaired area still lets sunlight through to the plants below. This makes the repaired area act a lot like the unharmed film around it. The result is a fix that keeps the covering safe without blocking light where it is needed.

Quick Clean and Press Application for Fast, Easy Repairs

The tape is easy and quick to apply. First, clean and dry the damaged area, ensuring it's free of dust and water. Then, put the tape over the damaged area and press it down firmly. Firm pressure activates the glue and sets the bond. The repair takes only a few minutes and requires no special tools or heat.

The method works well for bigger damage. For larger tears, you can tape both sides of the film or add more than one layer for extra strength. The flexible design means that one roll can fix anything from a small hole to a stubborn split. This makes greenhouse repair tape a useful item to keep on hand for quick, reliable seam sealing on plastic sheeting, tents, and other seams.