VEVOR Electric Chain Hoist Three Phase Crane Hoist 1995.8 kg Load 609.6 cm Lifting

Three Phase Electric Chain Hoist with 4400 lbs Lifting Capacity and 0.39 in G100 Chain

This three phase electric chain hoist is one of the most capable options available for large industrial and commercial lifting applications. It has a lifting capacity of up to 4400 lbs (1996 kg). Made of 8620 alloy steel, it has a G100 rating and a heavy 0.39 in (10 mm) link diameter that resists stretching, abrasion, and deformation under constant strain. For rated capacity and chain quality, there’s no better mix of the two for tough lifts day after day.

A heavier chain also makes the process run more smoothly, as it passes through the hoist mechanism with less vibration and noise than lighter-duty options. Whether you are taking engines out of big rigs, setting steel beams, or moving industrial equipment around a shop floor, the chain holds fast with no unexpected stretch or slack. It is the build quality that makes the difference in professional contexts where reliability is not a choice.

3.5 kW Three Phase Motor Built to Power Through the Heaviest Industrial Loads

At the heart of this machine is a 3.5KW copper-wound motor fed by a three-phase 230V / 50Hz power supply, providing stable torque and output over long work cycles. Three-phase power has a more even energy flow than single-phase power. This means it is easier on the motor both at startup and at full power. This results in longer motor life and fewer incidences of overheating, even when performing lifts in succession during a full day of work.

A built-in radiator fan actively circulates air around the motor casing to dissipate heat during heavy operation. It prevents heat buildup that could lead to premature motor wear or involuntary shutdowns during a task. The copper windings contribute to this longevity, as copper withstands heat better and retains its electrical properties longer than aluminum under high-demand conditions.

20 ft Lifting Height at 21.6 ft/min Speed for High-Reach, Fast-Cycle Operations

This three phase electric chain hoist has substantial vertical reach, with a maximum lifting height of 20 ft (6.096 m), making it useful for high-bay workshops, warehouses, and two-story garages where items need to travel long distances. With a lift speed of 21.6 ft/min (6.6 m/min), the device is quick enough to keep work flowing without the long, irritating wait times you get from weak hoists. That speed-to-height ratio is a real productivity plus in commercial and industrial applications.

The full 20 ft of chain travel also provides versatility in applications where the mounting point is higher than normal or where items must be lifted to raised platforms or storage racks. The operators can adjust the positioning with a dependable control response over the entire height range. For activities that demand repeated lift cycles at elevation, the combination of reach and speed allows the full scope of the job to be handled without compromise.

328 ft Wireless Remote Control for Hands-Free Load Positioning from a Distance

This three phase electric chain hoist comes equipped with a wireless remote that can be used up to 328 ft (100 m) away, compared to wired control systems that limit your movement. This type of range is particularly useful in large warehouse or industrial floor applications where an operator may have to walk away from the hoist mounting point to guide a load into place. It’s a one-handed operation, so your other hand is free to steer the load or handle rigging.

The remote has a responsive switch that registers orders swiftly and accurately with no lag or delay whatsoever. You can precisely time your lift, lower, and stop, which is important for placing big objects into machinery stands, shelving, or vehicle frames. Wireless operation also removes cable trip risks in busy work locations, providing a real safety benefit as well as the convenience of unfettered movement.

Electromagnetic Brake and Emergency Stop for Secure Load Holding at Any Height

An electromagnetic brake is incorporated, and the instant the motor loses power, it locks the load in place, without any action on the part of the operator. It is especially important when handling loads of 4400 lbs, as a small slip at height can cause catastrophic equipment damage or harm. The brake maintains its position consistently when the hoist is halted mid-lift, powered down between jobs, or stopped in an emergency.

A further method of instant control is the emergency stop switch, which immediately cuts off all operation when needed. This is especially true in rapidly changing workplace conditions where the unexpected movement of nearby people or equipment may require an immediate stop. These two mechanisms together ensure that the hoist is safe and controlled at every stage of a lifting operation, from ground level to a maximum height of 20 ft.

VEVOR Three Phase Electric Chain Hoist for Garages, Shops, Hotels, and Beyond

Installation is simple, with the hoist mounting directly to ceiling joists or overhead beams using metal or solid wood strips, no complicated rigging hardware. With dimensions of 24.4 x 16.9 x 31.5 in (620 x 430 x 800 mm) and a weight of 226.4 lbs (102.7 kg), the device is hefty but designed for fixed overhead mounting, keeping your floor area completely clean. Once installed, it covers a wide range of lifting requirements in garages, car shops, hotels, and light industrial facilities.

Easy boat engine removal and installation, auto engine swaps, heavy mower servicing, golf cart relocation, raising boulders or lumber, and game hanging after the hunt are practical applications. From the professional tradesperson to the serious enthusiast, a single machine that covers these many use cases offers genuine value. This three phase electric chain hoist is chock-full of heavy-duty features and designed to be a permanent part of any demanding workspace, compatible with three-phase power.