VEVOR Heat Exchanger, 5"x 12" 50 Plates Brazed Plate Heat Exchanger, Copper/316L Stainless Steel Water To Water Heat Exchanger For Floor Heating, Water Heating, Snow Melting, Beer Cooling

It is not recommended to use in swimming pools. This is a copper brazed plate heat exchanger. The main body is stainless steel and the solder is copper, so the pool water will still come into contact with copper. The swimming pool is disinfected with chlorine. Chloride ions are corrosive to copper. If the pool water contains chloride ions, it will affect the service life of the plate heat exchanger. Also, the pH value of the water is recommended to be between 6 and 8.

This product has an American made external thread NPT 1-1/4 and needs to be equipped with an NPT 1-1/4 internal thread.

The design pressure of this product is 30Bar/3.0Mpa. It is recommended that the pressure of the medium entering the heat exchanger during use be within this range.

Hello, this type of heat exchanger is a partition type heat exchanger, which requires two flowing media, one cold and one hot, to exchange heat through the heat exchanger. It cannot directly heat other equipment. This type of heat exchanger is mostly used for water that is heated by a boiler and then becomes high-temperature water and then enters the heat exchanger, and then heats the tap water for domestic use.