VEVOR Continuous Bag Band Sealing Machine, 0.24-0.47 in/6-12 mm Seal Width, Horizontal Band Sealer Machine with Digital Temperature Control, Carbon Steel Bag Sealer for 0.02-0.8 mm Plastic Bags Films
Without Inflation Without Counter Without Printing
Questions and Answers
5 Questions
I’m interested in purchasing this specific sealing machine.
I use 12 × 18 cm bags, and after placing the product inside, I need to make the seal approximately 4–5 cm (40–50 mm) below the top edge of the bag.
Does this machine have enough free clearance above the sealing line for 4–5 cm of bag material to pass through freely without touching the machine housing, folding, or getting wrinkled?
In other words, I need to leave 40–50 mm of material above the seal.
No, this machine does not have enough clearance above the sealing line to accommodate 4–5 cm of excess bag material without folding or wrinkling. Standard sealers are designed with a minimal gap, and since customization is not available, we cannot modify the housing to fit this requirement. The product is temporarily unavailable. We recommend clicking ""Notify Me"" on the product page so you'll receive an email as soon as it's back in stock.
By vevor
Can I use this machine to pack the flat bottom 1000 g kraft packagage, that is 340 mm tall?
It is not suitable for flat-bottomed 1000g kraft paper packages with a packaging height of 340mm.
By vevor
Hello , the product can cut the bag ? I mean , for example if my bag have 10 cm , and my product have 5 cm , the excess will be cut ?
I used in dairy production , I want package cheese, and I will have a little water in bag , this will be a problem?
Thank you!
It doesn't have the function of cutting bags, so it's best to use a vertical type for liquids
By vevor
Do you sell the smooth wheel for the Vevor continuous bag sealing machine? If not can you tell me where I can get this part?
Hello, the size of the wheel is 50*19mm, and it is recommended to buy it on Amazon.
By vevor
Hello,
Can the bag sealer handle PA-PE-PA Foils with a thickness of 200 micrometers ( 0,2 mm ) ?
