All

Customer Reviews

  • 4.7
  • 4.5
  • 4.6
  • 4.7
adrin adrin
185 x 100 mm
mr.
Big disappointment... The product received has unpleasant differences compared to the one presented on the Vevor website. Both dials are graduated 0-4mm, although the axes have a step of 2mm! And in addition, the marking of the dials is done upside down! Big disappointment...
Vevor Cross Slide Table Milling Machine Worktable 4-7/10" X 4-3/10" X Y Axis Vevor Cross Slide Table Milling Machine Worktable 4-7/10" X 4-3/10" X Y Axis
0
Customer Service Reply: Dear customer,
Thanks for your message and sorry about the inconvenience caused.

We are glad to offer you the best service here.
Would you kindly send e-mail to support@vevor.com with your order number and the related photo or video to show the issue clearly please?
We will help you check it and reply you within 24 hours.

Please do not worry. We will offer satisfying solution after we figure it out.
Your any feedback will be highly appreciated.

Best regards,
Vevor Team
Alan Wallington Alan Wallington
450 x 170 mm
Mr
Very pleased with this item. Please bear in mind I am not precision engineer, I am a wood worker mainly interested with wood turning. Now and again I have the need for a metal work lathe, but I cannot justify buying one, so I have converted my wood lathe into a metal work lathe. To achieve this I purchased this simple compound table, a tool post and tool holder and a set of metal turning tools. OK, it not a Colchester or any other precise lathe but used very gently it works a treat. Had to rebuild the table of course! Would recommend just adding an m6 nut to the handwheels.
0
Cole Cole
450 x 170 mm
none
The casting has some rough edges, the wheels don't fit out of the box. But after some cleaning, lubing and adjusting the gibs the table works as better than expected. One downside is the bend leadscrews, but that can be straighten
0
Ann Mackenzie Ann Mackenzie
185 x 100 mm
Not perfect but worth the money.
Good casting but required the end thrust bearings replaced.Easy job. Used to hold a job next to my milling head. Very happy with purchase
0
BigBertie BigBertie
185 x 100 mm
Mr
What I expected for the price was something that was basically sound but had been shoddily assembled, was probably unusable as delivered but with fettling could be turned into a decent bit of kit. That is exactly what I got! About 5 hours later and it’s pretty good, perfectly sufficient with a drill press and OK for light milling. Non existent quality control resulted in an excellent price. Rough edges, nibs, wobbling, paint overspray on running surfaces, hand wheels incorrectly sized meant that bearings and calibrated wheels didn’t work. Oh, and no grease anywhere so although easier to clean, hardly surprising that everything felt rough. However, cleaning, filing, sanding, deburring, scraping off paint and lubricating worked wonders. The hand wheels needed touching up on the lathe…the tolerances were wrong so rotating parts were either too tight or too loose. I couldn’t have done it without a lathe but it wasn’t difficult work with one and everything now runs smoothly and accurately. The cast iron is quite soft but that makes it easier to tweak. The only thing I’ve yet to do after installing on my drill press is to check the horizontals of the table. I expect it to be out but it should be easy to simply shim it up to get everything square. So if you want to use it out if the box…awful….but if you’re happy and able to put in a few hours setting the thing up properly, you’ll have a decent xy table with no side play and smooth operation for a very good price. Am I happy that I bought it? Yes. Would I recommend it? Yes…with the above provisos. Overall rating ** as received, but ***** after fettling.
0
MR BRIAN VICKERY MR BRIAN VICKERY
185 x 100 mm
COMPOUND SLIDE MILLING TABLE
VERY GOOD PRODUCT, I WILL BE USING IT FOR SMALL MILLING JOBS.
0
Oil-less Dave Oil-less Dave
450 x 170 mm
A passable X/Y Table
Many reviews focus on the finish of these tables, in most respects mine was usable out of the box. I stripped it and relieved all sharp edges but found the ways to be adequately ground so just lubricated. Thrust bearings were present and the gib strips adjusted to leave free movement with no play. The only issue was the perfunctory flaky chroming of the hand wheels which I had to clean up!. For the price I was impressed but have yet to affirm the levels on the horizontal plane. Not so critical on drill press but important for milling? Overall a worthwhile purchase.
0
Thomas Thomas
450 x 170 mm
MR
perfect function for my use in my garage shop, i use it in my hobby mill...................................................................................................................................................................................................................................
0
PC assist PC assist
185 x 100 mm
As described
Fast shipment, no fuzz. Item fullfills my need. Also a good price. No complains. Sweden. .................................................................................
0
Teemu Teemu
450 x 170 mm
Very good
Arrived fast and well packed to Finland. I took it apart, filed, cleaned and adjusted it. After that it is perfect. I like it. You can`t beat this deal. I strongly recommend.
0

People Who Bought This Item Also Bought

44-330-175-5511 Monday to Friday, 08:00-16:00, GMT+1 ©2009 - 2022 VEVOR All Rights Reserved