Customer Reviews for VEVOR Precision Milling Machine Vise 5 Inch Accu Lock Swivel Base Clamping Vise 360 Degrees Scale Bench Vice Clamp 125mm Width for Milling Drilling Machine Precision Parts Finishing

Using the 4in vise on a smithy Midas 1220. It fits the slide perfectly from side to side and must be bolted at the cross keyways. I rated the product on it's cost, and it showed up with only a mild cleanup needed. It will surely give years of dependable service.It arrived quite fast, and while packaging was a bit lacking, there was no damage to it. It is a big chunk of metal after all

It is very nice to be used with any my milking machine. I have a small milking machine and the height of this vise slightly limits my space to work but I am still very happy with its quality.

Good quality vise for the money. Swivel works well. Overall great product. Would recommend.

First off I ordered a 3 inch and a set of 3 inch precision parallels got my parallels and then came the vise, But it's a 4 inch.It would have been nice to get what I wanted but I need it Now so I will keep it. Seems good quality yes there are some very sharp edges but it works smoothly out of the box,I can screw it out and all the way in with my fingers No wrench so Happy for that.

I bought this to use with a mini mill. When I bought it I was concerned that it may be a little loose or sloppy. But when I received it and put it on the mill, it iwas better than I thought it would be. It is tight and accurate and has adjustments for tightness. All the surfaces on the vise are nice too. I previously had a large 6" vise of a different brand on a larger mill, but wanted something small for the mini mill.

Mine arrived ready to work with just a tiny amount of clean up. Vise was smooth operating, and very clean appearance. The bottom of the one I got is very flat, like wringing flat. Keyways are 14mm. Jaws open to 4-7/8" plus you can move the rear insert to the back of the movable jaw for a total of 8-15/16" clamping. The keys provided look to be MIM parts but they work and you can always make 1/2" or 5/8" keys if you need to. Crazy good value. A++++++++++++. Oh, yeah, the holes on my table are 5-3/8" apart and the vise bolted down perfect with 1/2" bolts.Bought another vise. This one in 6 inch (160 mm) size. Super happy with this one too. Jaws open to 163 mm and are 45 mm deep. Jaw inserts were ground on the vise and mate perfectly. You cannot see the joint when closed. I am sure I will if I remove them and don't put them back the same way however. Paint is great, Inside edges of bed are real sharp, as ground. May take a stone to them, or not. Great value.

its a milling vice that vices. Is straight to .001"

Well made good finish

Prodotto fatto veramente bene,preciso e direi di ottima qualit. Arrivo in anticipo con un ottimo imballo.

Nice quality and value