Customer Reviews for VEVOR Precision Milling Machine Vise 5 Inch Accu Lock Swivel Base Clamping Vise 360 Degrees Scale Bench Vice Clamp 125mm Width for Milling Drilling Machine Precision Parts Finishing

More than expected, excellent accuracy for my old machine. Only minus was the marking of the scale, there is no drawing or Mark that you could see the degrees...

Degelijk, ziet er goede kwaliteit uit. Klauwen schuiven soepel weinig speling Bij veelvuldig gebruik zal het uitwijzen dat het top is.

The 5inch vice arrived promptly and surprisingly undamaged given it's weight. Unpacking it I noticed immediately that the finishing was not great but 20 minutes with files took off the sharp edges. Out of the box the jaws aligned well and the action was smooth bit I felt that there were some small modifications that would make it better. Firstly I didn't like how the lock collar just screwed onto the threads so I made a brass split collar to replace it. Also the bearing surface for the back of the lead screw had not been machined and caused a little binding. I used a dremel tool to flatten this and then added thrust bearings on both front and back surfaces to make it easier to use. Overall this product is, with a little TLC, value for money.

Excellent rapport qualité prix petit bémol sur la peinture de finition de la base tournante très robuste très bon service de Vevor merci

Zu dem Preis unschlagbar, ist bereits mein zweites Teil von der Marke

The vise seems sound except the screw nut. I need to take it apart and find out why it has so much looseness under the movable jaw mount.

I like the vice, so far I have only used it on my drill press. It seems to be well made, good fit and finish on the vice. But I am disappointed with the handle - very rough casting - no finish work. Took me a few hours to clean it up.Keep in mind this vice is heavy and large. I use it on a 20-inch drill press. Might be too large for a smaller drill press.

J'ai une perceuse sur colonne de 1.70m avec un grand plateau, cependant vu le diam_re et c'est limite pour bien installer. De plus il est difficile de savoir pr_is_ent si l'_au est bien a 0 (d_aut d'aiguille de rep_e).Sinon _au costaud et lourd,.Cet _au est plus a mettre sur _abli.

I have used this vise with parallels and faced aluminum and mild steel with no major chatter or loosening. I also worked with it on the mill to produce 6 holes on a round object and liked using the dial. I did notice that the 90 is not set 90 degrees and had to be offset by 5 degrees to have it square to the mill_ work table.

This is a great vise for my Harbor Freight mini mill. I did have to lubricate it before using it because it was not smooth. This was the reason for four stars instead of five.