Customer Reviews for VEVOR 3-Jaw Lathe Chuck, 10'', Self-Centering Lathe Chuck, 0.24-9.84 in/6-250 mm Clamping Range with T-key Fixing Screws Hexagon Wrench, for Lathe 3D Printer Machining Center Milling Drilling Machine

Great product, well packaged, arrived in good shape perfect delivery time as they promised. Have to figure out how to have it mounted because the radius for the three bolts that hold it on the plate, is slightly larger than the radius of the holes for the plate, about 3mm. I did not try to install it right away and cannot return it. Check those measurements, which they don't provide, before ordering or will end up as a very heavy paper weight.

see no problem with this chuck. Since several reviews indicated a malfunction because of debris inside the chuck, I immediately disassembled it upon receipt. Disassembly was simple. One review stated the jaws didn't close evenly. I think those jaws were removed and were not reassembled in the correct order. I found one small chip inside which would have never caused a problem. The chuck was well oiled, wrapped in plastic, and packaged securely. I am in the process of turning the backing plate, so I can not yet attest as to the trueness of the jaws, but, I don't foresee a problem. The OD of the chuck is larger than 6". It measured 6.424". There is one plastic piece attached. It seems to be a "dust cover" on the back side and has no mechanical function. The jaws are numbered, (1,2,3) but, the chuck itself is not numbered. I plan to just number stamp it myself. I can see this chuck giving years of service. I feel I got a good deal.

This was a perfect replacement for my table to lathe. It was a little stiff, but I disassembled it, a thorough cleaning, and lubricated it. It was spot on and the runout was pretty accurate (within .001"). I'm looking at one of their 4 jaw chucks now...

The quality of the chuck is good, but bought a vevor brand wood lathe and had trouble getting the t bar to mount. Now I have this 4 inch 3jaw chuck that does not have the correct size t handle. I will post a video later. Update, I contacted vevor about the chuck key, and they quickly fixed the problem. If you have any issues, I recommend contacting them because I contacted Amazon about it and it went nowhere.