Customer Reviews for VEVOR Linear Guide Rail Set, SBR20 1500mm, 2 PCS 59 in/1500 mm SBR20 Guide Rails and 4 PCS SBR20UU Slide Blocks, Linear Rails and Bearings Kit for Automated Machines DIY Project CNC Router Machines

ok comme d_rit

I needed to make a jig for using a router to mill large slabs flat on both sides. The slabs are too large for a planner or a drum sander. If the slab was not close to square, a belt sander would not be able to cut enough off. So instead of spending $1000 for a jig, I am building one with the help of these Linear Rails with the ball bearing slides. I actually bought 2 sets of the rails, 1 set is 60 inches and the this set (40 inches). The longer rails will be mounted on a side that is parralell to the slab on each side for the jig to rest on and be able to move it from one end to the other and the shorter rails will attach to the bearings of the longer rails an the router will sit on a platform attached to the bearings of the shorter rail. This allows for the router to be moved easily across the slab and from one end to the other and hold the router flattening bit at the same level.

Excelente producto

Exactly what I expected. Ball bearings are low quality, but was to be expected.

Used smaller before. These are substancial.

I bought these rails to fabricate a custom TV mount for a VERY large flatscreen we bought. I wanted to be able to slide the tv to the side to be able to access a hidden area behind the tv where the receiver, etc would be stored. The tv weighs in at 97 lbs, and I am able to slide it back and forth on these with a light touch of only 1 finger. They seem to be well constructed and are well worth the price.

Lieferung Schnell und Problemlos. Es wurde zus?tzlich zu den Lagerb?cken ein Ersatzlager zum Austauschen Mitgeliefert. Top

Very well made!

I used this to build a horizontal manual mill machine. They work very well and provide sturdy support for the spindle. Accurately machined with consistent sizes and spacing. Would recommend them, especially at the price point.

Perfect bearings slide smoothly, does as it should