Vonkajšie zábradlie na schodisko VEVOR, vhodné pre prechodné kované zábradlie na 1 až 4 schodoch, nastaviteľné vonkajšie zábradlie na schodisko, zábradlie pre betónové schody s montážnou sadou, vonkajšie zábradlie v matnej čiernej farbe

Would have given it 5 stars but there is some corrosion (rusting) starting in a couple of places after only a month of use outside. However, you could touch up the areas with Hammerite ‘direct to rust’ paint. Despite this it is good value for money and is, if you are handy with DIY, easy to install. The finished result looks very professional and neat and providing you get the anchor fixings right it is strong enough to resist someone falling into it. The supplied 12mm masonry drill bit is, like other reviewers have pointed out, an SMS item, so if you haven’t got an SMS drill you’ll need to buy a regular drill bit if you don’t already have one. I mounted the rail on tiled concrete front door steps. I used a 6mm diamond tip Erbauer self cooling drill bit (c.£19 at Screwfix) to start the fixing holes off for the upright posts. Doing this at 6mm enables you to more accurately keep the centre line of the hole in the right place. You need to keep the position of the 4 holes for each upright post precise as there is very little clearance between the supplied anchor screws and the holes in the post’s baseplate. I then used a 6mm masonry drill to put a pilot hole into the underlying concrete. Then I carefully opened up the 6mm hole in the tile progressively using an 8mm then 10mm and finally 12mm drill bit. Take care doing this as it’s easy to crack the tile - let the drill bit do the work without putting too much pressure on the drill. Doing this with masonry bits as opposed to diamond tile drill bits saves money as the larger diameter tile bits are very expensive! Once the hole in the tile was at 12mm, I progressively used an 8mm, 10mm and finally the 12mm masonry bit to get the hole in the concrete to the right size whilst keeping the centreline accurately placed. The supplied metal steel inserts can then be tapped into the holes using a hammer. Sounds labour intensive and yes it does take a bit of time but patience is the key to a good strong job here, so persevere. All in all a good item in my opinion.

Easy to install, all accessories included (drill bit also!). Only the packaging could have been better as the unit suffered damages at transportation ... but the after-sale service was great and managed to replace the linking piece arrived broken! 5 stars especially due to the excellent "problem solving" oriented customer service.

Passade perfekt!

The railing is perfect to add to any steps. We had difficulty creating the holes for the base but rented a drill from home depot and we’re able to install. Very easy setup but the instructions were not the clearest and both sets we purchased the paint was scratched on the railing.