VEVOR 10L Ultrasonic Gun Cleaner, 300W Professional Ultra Sonic Cleaning Machine with Timer & Heater, 40kHz Digital Ultrasonic Cleaner with Basket for Gun Parts, Bullets, Military Supplies

Ultrasonic Gun Parts Cleaner with 40kHz Frequency for 360° Deep Cleaning

This ultrasonic gun parts cleaner approaches firearm cleaning the way the contamination actually behaves: at 40kHz, cavitation energy floods the cleaning solution and penetrates every internal channel, groove, and recessed surface simultaneously, breaking the bond between fouling and metal without any physical contact with the part.

The geometry of gun components — slides, trigger groups, barrels, and action parts — presents exactly the kind of irregular, internally complex surfaces that ultrasonic cleaning handles best. Every recess gets the same treatment in the same cycle, and because nothing touches the precision-machined surfaces directly, there is no risk of scratching, misalignment, or dimensional change. Parts come out clean and go straight back together.

304 Stainless Steel Tank and Basket for Scratch-Free Durable Performance 

The inner tank is made of 304 stainless steel, which does not rust or wear easily and can withstand repeated exposure to cleaning solutions, oils, and high temperatures without breaking down. The inside of the tank measures 500x135x150mm, giving it a long, narrow shape that works well for cleaning rifle barrels, pistol frames, and other long parts without taking them apart more than necessary.

During washing, the 304 stainless steel basket that comes with the machine keeps parts off the tank floor, preventing direct contact with the surface that could damage or scratch sensitive parts. The tank and basket design works well together to last a long time in tough professional settings, like gunsmith shops and military maintenance areas, without the materials breaking down over time and reducing cleaning quality.

300W Ultrasonic Power with 5 Transducers for Uniform Cleaning Intensity 

Five piezoelectric sensors, evenly spaced along the base of the 10L tank, produce a total of 300W of ultrasonic energy. This setup ensures that the level of cavitation is uniform throughout the tank, so there are no weak spots where the cleaning action would otherwise slow down. No matter where an item is in the tank, it gets the same thorough treatment. 

With its 300W output, the cavitation energy is sufficient to remove tough dirt, carbon deposits, powder fouling, and metal residue from intricate gun parts and mechanical systems. The 10L tank's transducer count and power level work well together to clean as efficiently as possible without creating turbulence that could damage delicate or precisely ground surfaces. 

300W Heating Element with 0–80°C Adjustment for Targeted Contaminant Breakdown 

The 300W heating element lets users precisely set the temperature from room temperature to 80°C, which lets them find the best cleaning conditions for each type of contamination. The chemical breakdown of grease, oil, carbon, and organic waste happens faster at higher temperatures. Heating and ultrasonic operation can work separately or together, depending on the job.

This separate heating feature is especially helpful for soaking highly soiled parts at room temperature before running an ultrasonic cycle or for keeping the solution warm during long cleaning sessions. The 0–30-minute timer controls the ultrasonic cycle separately from the heating function, which can remain on after the timer runs out. 

Digital Control Panel with 0–30 Minute Timer for Precise Cycle Management 

The digital control screen makes it easy to adjust all the machine's settings without much effort. Users can set the timer to any time between 0 and 30 minutes, so they can find the right cycle length for the amount of contamination and the type of component. Temperature and timer settings can be adjusted independently, and the LED screen displays both values in real time throughout the cycle.

With a noise level below 75dB, the unit is suitable for workshop environments. Setting up a full cleaning cycle takes only seconds thanks to the panel interface's quick-setup design. Users can run heating-only or ultrasonic-only cycles, depending on the cleaning job, because the heating and ultrasonic functions operate independently.

Portable Design with Drain System and Anti-Slide Feet for Safe Daily Use 

This ultrasonic gun parts cleaner weighs 7.4 kg and measures 530 x 165 x 296 mm, which is a good size for a 10L machine on a standard workbench. A foldable handle makes it easy to move the tank without straining under its weight. The unit stays firmly in place on any work surface during ultrasonic operation thanks to anti-slip rubber feet. This stops movement caused by vibrations during cycles.

The easy-to-drain design makes it simple to empty the tank after each use without lifting or turning the unit. This feature is important for a machine often used with dirty cleaning solutions containing carbon, grease, and solvent residue. The 1.5-meter power line is long enough to reach power outlets on a bench. 

Ultrasonic Gun Parts Cleaner Suitable for Lab, Automotive, and Industrial Use 

This ultrasonic gun parts cleaner can handle a wide range of professional cleaning jobs across many businesses. Its main purpose is to clean firearm components and related metal parts. Automotive technicians use it for engine components such as carburetors and injectors. People who work in labs clean instruments, glassware, and precise tools. Dental and medical technicians use it to clean instruments before sterilization. The same machine also cleans jewelry, glasses, watches, and circuit boards very well.

With 300W ultrasonic power, a 300W heater, 40kHz frequency, and a 10L tank, this unit combines cleaning performance and capacity for a wide range of professional applications. Whatever the application—a professional gunsmith shop cleaning several guns every day, a military maintenance facility needing consistent results, or a general-purpose workshop working with a wide range of parts—this VEVOR unit cleans thoroughly and without scratches every time.