VEVOR automatisk trådavskiljare, 0,06''-1,42'' elektrisk motoriserad kabelavskiljare, 370 W, 88 ft/min trådskalare med en extra manuell vev, 11 kanaler för återvinning av kopparskrot

Item seems good, first try of the stripper and it cuts well at a consistent depth. Easy to set up and use.

Works well, using it to strip twin and earth and then the separate wires. Also cuts the inner sheath on armoured cable.

Does exactly what is says and strips wire quickly and efficiently once you get the knack. Keep the blade as high as possible so you cut the shield but not the copper cable to preserve blade life

Very good piece of machinery stripped the cable with ease good value for money delivered in very good time and very sturdy and well designed piece of machinery

Great little stripper,Saves alot of time sorting the cable into sizes, so you font have to keep adjusting the cutting wheel.I took one nut of the handle to be able to get the wheel lower for the really small cable,

I am extremely satisfied with the machine. He came very quickly. He does exactly what I expected him to do. For proper functioning, you need to choose the right opening and set the right pressure. The advantage of the machine is that it is possible to set the correct pressure both on the side of thinner wires and on the side of thick wires/cables. Strips insulation in a sufficient range of dimensions. With new knives, it can also strip wires slightly thinner than 1 mm. Stripping a solid copper conductor with a cross-section of 10mm2 is a bit of a problem for him, but either you let the machine suffer and it will handle it, or you prefer to strip these conductors by hand with a knife. When you strip the cable wires, you have to carefully choose the right opening and the right pressure so that you don't cut the individual wires, but it can be done. This machine is ideal for DIYers who strip thinner wires/cables in smaller quantities. It is even suitable for an apartment, as it has a real electricity consumption of 60-80W (depending on the load) and is quiet (it can be made a little quieter by placing it on a foam pad that absorbs vibrations) and is easy to carry and small enough to store. This machine is also ideal to buy with https://eur.vevor.com/wire-stripping-machine-c_11523/cable-stripper-wire-stripping-machine-copper-recycle-1-5mm-25mm-p_010630760561 (I have also), which you will drive with a cordless drill for fine tuning when stripping cable wires, or for wires that you cannot adjust to given the machine... I definitely recommend this machine, you just have to learn how to work with it. It will save a lot of work and time. Too bad I didn't have it sooner. :-)A spare knife is also supplied with the machine. You can buy a new one on aliexpress, for example, according to the dimensions of the delivered one (which is 68*35*2.8) - I bought 5 pieces like this for €35.

\"This is a neat little tool! I am an electrician ,We work with electrical wires everyday, and been stripping the wires manually or with a plastic version of this. Why I do not find this earlier, this works fantastic for stripping wire. It doesn't work on the really big copper wire, but really does great for the smaller stuff. \"

Not good its okay to Big kabels but not small at all also it Can only take straigt vabels not curly

I've been using this for a few years now. Two of them the machine has been exposed to the weather on a frequent basis. The durability is excellent. It works great on Romax type wire. If you get much bigger or smaller it struggles. My primary complaint is that wire jumps out of the track any time there's the slightest kink in the wire. Attaching a drill works, but it's not especially elegant.. . There might be an adapter I long ago lost, but to get it to work I had to use a hex bit to turn the stripper. Which is a bit awkward, but it works. The 4 star is mostly for durability. Given the miles of wire I've stripped and the weather extremes this stripper has endured I had to give it a good rating.

Producto de buena calidad