VEVOR CNC Router Machine, 300W, 3 Axis GRBL Control Wood Engraving Carving Milling Machine Kit, 15.75 x 15.75 x 2.36 in / 400 x 400 x 60 mm Working Area 1200 RPM for Wood Acrylic MDF PVC Plastic Foam

Bought for PCB, plastic and wood. Light engraving on metal. Machine is good quality, nice and rigid, easy to assemble and gives predictable and repeatable results. Very nice 5 *

If you buy also: er11 clamping (4mm) and 2mm Tungsten Carbide End Mill milling cutter (shank diameter 4mm), then it is more simple to program the milling route. V-shape milling edges, which comes in the packet conflict in more cases during programming (.gcode -file). I used FreeCAD 1.1 to make 3d-carving routes from .igs file which was from AutoCAD exported. The body of the carving machine is rather slobby comparing to any more expensice milling machine, due to bolt joints in the body. It could be totally without bolt structure made (welded in china rather). I believe this can be used for carving brass. I tested it to brass a little, but the milling tips which comes with the packet funtion only with softer materials. The 500W version does not have to run full power all the time. Also it is not so noisy.

Fair price, prompt and quality services, seriousness! The product fully matches the description, the support service is impeccable. I highly recommend!

Quite a solid game. If only I could get the g-code right. It will probably work out if you really try. Then it will be a hit.

Since I have purchased from Vevor several times, when I needed a milling machine of this caliber, I visited their website and found the strongest machine in its category, the S4040. I watched videos about it, assembly guides, and looked at similar equipment elsewhere. Compared to foreign distributors, it arrived within 2-3 days. I was able to assemble it without difficulty and put it into offline use. Due to my mistake, I triggered the control with an incorrect software. I reported it to Vevor's service, and then came the surprise; within hours, with just 2-3 emails, we fixed it, and now it is working again, and we are getting to know the machine. I have found a really good partner in Vevor again, and now I have also gotten to know their service background. A helpful, resourceful, and prepared team. There is no beating around the bush, no disappearing, no time-wasting. A reliable partner. I thank them for their work through this message. P.S.: I just noticed that when I bought it, it was discounted; this is often used by loser distributors. However, in this case, I really bought it cheaper because it is now listed at the original price.

I bought the VEVOR CNC router (400x400x60mm, 300W) as an affordable entry point into CNC engraving and cutting for wood, MDF, acrylic, and plastics. It comes as a kit, and with a bit of patience the assembly went smoothly. Once up and running, I was pleasantly surprised by the accuracy you can get in this price range. The 40x40 cm work area is more than enough for hobby projects, and the offline controller is a nice bonus since you don’t always need to keep a PC connected. For light engraving and cutting in wood and acrylic it works quite well, and with the right feed rates and speeds you can get decent results. The machine feels stable enough for hobby use, and as a first step into CNC it’s a good learning tool. However, there are a couple of drawbacks: Wear and tear on parts such as rails, belts, and guides shows up rather quickly with regular use. The included bits were simply terrible – they dulled extremely fast and left uneven cuts. Investing in proper bits right away makes a huge difference. Overall, I’m satisfied with the machine as a budget-friendly entry into CNC, but you should be prepared to upgrade the tooling and do more frequent maintenance than expected.

WORKS PERFECTLY

Can't say enough. Use it all the time

I am very satisfied with the purchase made. I changed the motor with the model '10000 rpm brushless DC motor kit 24V drive board with cable, suitable for 3018 pro CNC engraving machine' purchased from another site, which costs about 400 lei, but it is quieter and allows for speed adjustment through PWM. Otherwise, the original one was fine, but I am picky. :) Otherwise, I wholeheartedly recommend this product.

Fast delivery, easy PC setup and connection. Only the manual order display reacted poorly. But thanks to friendly communication and technical support, everything was resolved in no time. I am very satisfied with both the quality of the product and the communication and support from VEVOR.