Address Signs
Results for Address Signs
The address signs on this page are reflective driveway markers, also called snow stakes. Each one is a hollow orange fiberglass rod with two reflective strips near the top, a pointed tip and a protective cap. Packs include a steel drill bit and gloves for setting them. You push or tap the markers into the ground along a driveway edge, so headlights pick out the entrance and plow drivers see where the pavement ends. Homeowners, farms and property managers use them each winter. Unlike a house number sign, a marker shows the driveway line rather than the street number.
All 4 products here are sold in bulk packs. The 500-pack 48 in markers use a 0.25 in rod and suit long rural driveways, farm lanes and parking lots. The 200-pack of snow stakes is the same marker in a smaller count. For a single home driveway, the 100-pack 48 in markers step up to a 0.31 in rod that presses in by hand. Where snowbanks grow tall, the 72 in driveway markers stand 2 ft higher. All four also sit in the reflective driveway marker range. Owners usually set them in autumn before the ground freezes and pull them in spring.
Five things decide which one fits:
- Marker height: how far the marker stands above snow and plowed banks.
- Rod diameter: how stiff the rod feels when a plow brushes it.
- Pack coverage: how many markers you get for the length you need to mark.
- Install method: whether you press the rod in by hand or tap it in.
- Weight per marker: how heavy each rod is, which follows its length and thickness.
Browse every address sign here, and see the wider mailbox range.
Driveway Marker Types at a Glance
The markers on this page differ in rod build, cap and tip, and what ships in the box.
| Type | Rod Build | Cap and Tip | Box Contents |
|---|---|---|---|
| Standard 48 in markers | Hollow 0.25 in fiberglass rod, 47.24 in long | 0.31 in PE hammer cap over a pointed PE tip | 200 markers, a 12 in drill bit and gloves, 25.35 lbs |
| Thick 48 in markers | Thicker 0.31 in hollow fiberglass rod, 47.8 in overall | Protective cap over a pointed end | 100 markers, a 12 in drill bit and gloves, 18.9 lbs |
| Tall 72 in markers | Hollow 0.31 in fiberglass rod, 57.87 in long | Wider 0.39 in PE cap over a pointed PE tip | 100 markers, a 12 in drill bit and gloves, 28.66 lbs |
| Bulk 500 packs | Same hollow 0.25 in rod as the standard type | 0.31 in PE hammer cap over a pointed PE tip | 500 markers, a 12 in drill bit and gloves, 63.49 lbs |
VEVOR Address Signs for Homes, Driveways, Mailboxes, and Rural Properties
These address signs are designed to remain clearly visible day or night, even in rain, fog, or low-light conditions. By matching the sign type, visibility feature, and mounting method to the property plan and identification needs, you can choose the right address sign.
VEVOR offers a wide range of address sign types. The range has metal address signs, lockbox address signs, solar address signs, address signs that light up, and address signs that reflect light. Each sign is designed to display property numbers clearly and consistently in outdoor environments.
Address Signs by Sign Type and Visibility Features
Before you can choose the right address sign, you need to know where it will go and how visible it needs to be at different times of the day. VEVOR address signs are available in both passively reflective and actively illuminated styles to meet all your exposure needs.
House Numbers and Metal Address Signs for Permanent Property Identification
For homes and businesses, house numbers provide the most basic form of property identification. You can attach VEVOR house numbers in single-digit units directly to building facades, outdoor walls, gate posts, and fence panels. Every number is the right size to read clearly from the street at normal viewing distances.
The powder-coated steel or aluminum used to make VEVOR's metal address signs ensures they last a long time outdoors. The metal surface doesn't rust or fade, and UV light, rain, and temperature changes don't harm it. VEVOR metal address signs are easier to read from a moving car on the street because they use bold digit fonts and high-contrast color combos. Each sign comes with pre-drilled mounting holes that let you screw it directly onto brick, wood, or concrete surfaces without any special tools. VEVOR's metal address signs are a lasting and low-maintenance way to identify any property that needs a sign that looks clean and professional.
Solar Address Signs for Automatic Night Visibility Without Wiring
A built-in solar panel charges an internal battery during the day. The stored energy powers the LED lights naturally at night, so you don't need to connect them to anything electrical or use electricity. At dusk, VEVOR solar address signs turn on and stay lit all night, ensuring guests, delivery drivers, and emergency workers can always see the property address.
Each VEVOR solar address sign's solar panel is positioned to receive the most sunlight throughout the day. For most types, a single day of charging in normal sunlight gives you full illumination all night. The LED lights in VEVOR solar address signs are rated to last much longer than regular bulbs. Due to their stand-alone form, solar address signs are easy to install on gate pillars, driveway posts, and fence tops without running any wires through the ground or the exterior of the building. VEVOR's solar address signs are the best illuminated sign choice for homes in rural areas or with long driveways where running electrical wires to the sign spot is not an option.
Lighted Address Signs for Bright and Consistent Illuminated Display
Powered address signs plug into a standard electrical outlet and provide consistent illumination without relying on solar charging or battery storage. VEVOR lighted address signs use energy-efficient LED technology to display the property number in an easy-to-read format that stands out in bad weather and against dark backgrounds.
The outside of VEVOR lighted address signs is made of weather-resistant materials that keep the lights inside safe from snow, rain, and high temperatures. In places that don't get much direct sunlight, VEVOR's hardwired lighted address signs provide more stable, consistent light than solar options. Emergency services can quickly find the house at night if there is a lit address sign at the road entrance or next to the front door. VEVOR lighted address signs come in a range of panel sizes and configurations with multiple digits to fit a variety of property plans and mounting locations.
Reflective Address Signs and Reflective Driveway Markers for Passive Nighttime Visibility
Reflective address signs have sheeting or coating that bounces back vehicle headlight beams straight toward the driver. This makes the sign very noticeable at night without a power source or battery. VEVOR reflective address signs make it easy for emergency vehicles, delivery drivers, and people coming to the house after dark to see.
Reflective driveway markers from VEVOR display the property's address at the entrance, where it is most needed: along the edges of a driveway or access road. Each marker has a reflective surface that lights up when headlights hit it. This lets drivers see the driveway opening from a long way away. VEVOR's driveway address signs are staked and can be pushed right into soft ground along the edge of the driveway without any tools. It's not necessary to do much to keep reflective address signs and driveway markers working. All you have to do is clean them every once in a while. They also work efficiently without power. Both items are great for homes in rural areas, farms, and long driveways where there aren't many lighting options.
Which Driveway Marker Fits Your Property
Check your snow depth and the length you need to mark, then read across to one pack.
| Confirm Before Purchase | Matching Specification | Recommended Product | Main Limitation |
|---|---|---|---|
| Your snowbanks outgrow 48 in markers | 72 in overall height, 0.31 in rod, 0.39 in cap and tip | 72 in driveway markers | Heaviest marker here at about 4.6 oz each |
| You mark a long rural drive on both edges | 500 markers, 48 in tall, 0.25 in rod | 500-pack driveway markers | 63.5 lb box, the heaviest shipment here |
| You mark one home driveway and walkway | 100 markers, 47.8 in tall, 0.31 in rod | 100-pack 48 in markers | Only one height in this pack |
| You need a mid-size pack for a farm lane | 200 markers, 48 in tall, 0.25 in rod | 200-pack snow stakes | Black tip can come off when pulled out |
Material and Mounting Options Across VEVOR Address Signs
It depends on the material and fastening method of an address sign, how long it can last outdoors, and how easy it is to install on different surfaces and buildings. VEVOR address signs are made of durable materials for outdoor use, and they come with useful hanging systems for a wide range of applications.
Outdoor Address Signs and Mailbox Address Signs for Weatherproof Durability
VEVOR's outdoor address signs are made from materials designed to withstand sun, rain, wind, and varying temperatures. The main materials used in the VEVOR line of outdoor address signs are aluminum and powder-coated steel. Both materials are designed to resist rust, fading, and surface wear even after prolonged outdoor use.
VEVOR mailbox address signs stick right onto the mailbox post or mailbox body and show the property number in a way that is easy for people on the road and postal workers to see. Different weather-resistant adhesives, magnetic attachments, and screw fixings are available for VEVOR mailbox address signs. VEVOR mailbox address signs with high-contrast number colors are easier to read in low light and from moving cars. Along with the main house number sign on the building or driveway post, a mailbox address sign is a cheap way to add a second point of identification at the road edge.
Mounting Systems, Post Compatibility, and Installation Ease Across the Full Range
The mounting system ensures the address sign remains secure and stable, even in wind, rain, and physical contact. Multiple mounting methods are available for VEVOR address signs across their product line to accommodate a variety of placement surfaces and sign types.
With stake-mounted driveway address markers and reflective driveway markers from VEVOR, you don't even need to use tools to put them in the ground next to the driveway. Post-mount address signs use a clip or clamp system to hold the sign in place on a round or square post at the front of the driveway. Pre-drilled holes and basic hardware are included with wall-mount metal and lighted address signs, allowing them to be screwed onto brick, wood, vinyl siding, and masonry surfaces. VEVOR solar address signs come with a mounting bracket that keeps the solar panel at the optimal angle to capture the most sunlight throughout the day. By choosing the right fixing system for the installation surface, you can be sure the sign will stay in place and be easy to read from the road year-round.
Best-Seller Comparison
The four best sellers are compared below on marker height, rod diameter, pack coverage, install method and weight per marker.
| Product | Marker Height | Rod Diameter | Pack Coverage | Install Method | Weight per Marker |
|---|---|---|---|---|---|
| 500-Pack 48 in Driveway Markers | 48 in overall with a 47.24 in fiberglass rod | 0.25 in hollow rod, the thinnest here with row 4 | 500 markers, the largest pack for long rural drives | Hammer in with the protective cap on top | About 2.0 oz each, the lightest here with row 4 |
| 100-Pack 48 in Thick Driveway Markers | 47.8 in overall, about 0.2 in shorter than row 1 | 0.31 in hollow rod, thicker than rows 1 and 4 | 100 markers, a fifth of the row 1 pack | Press into soft ground by hand, drill hard ground first | About 3.0 oz each, 50% heavier than row 1 |
| 100-Pack 72 in Driveway Markers | 72 in overall, the tallest here for deep snow | 0.31 in hollow rod with a 0.39 in cap and tip | 100 markers, the same count as row 2 | Push in by hand, then hammer with the cap if needed | About 4.6 oz each, the heaviest marker here |
| 200-Pack 48 in Driveway Markers | 48 in overall, the same height as row 1 | 0.25 in hollow rod, the same as row 1 | 200 markers, between the 100 and 500 packs | Tap in with a hammer over the protective cap | About 2.0 oz each, the same as row 1 |
Shop VEVOR Address Signs for Every Property and Every Visibility Need
When it comes to identifying homes, rural roads, businesses, and mailbox installations, VEVOR address signs have everything you need. Prices are fair, and customers can count on reliable support after the sale for all products, including metal address signs, house numbers, reflective road markers, and solar and lighted address signs. You can browse all of VEVOR's address signs to find the right one for your home now.
Frequently Asked Questions
What is the difference between a solar address sign and a lighted address sign?
During the day, a solar address sign charges, and at night it turns on automatically without any wires. Connecting a lighted address sign to a household power source keeps the light on. Places without access to electricity are ideal for solar lights. Lighted signs work well for places where even brightness is more important than ease of installation.
How do reflective address signs work at night?
The retroreflective sheeting on reflective address signs reflects car headlights back toward the driver. It doesn't need a power source. Headlights shining straight on the sign make it very easy to see. When placed at the entrance to a lane or along the side of the road, reflective signs work best when they face oncoming traffic.
Can VEVOR mailbox address signs be used on any mailbox type?
There are weatherproof adhesive, magnetic backs, or screw fixing options for most VEVOR mailbox address signs. Standard steel mailboxes can hold magnetic models. Models that stick on or screw into mailbox bodies made of plastic, metal, or wood can be used. Before you buy, always check the product page to see whether the connection method works with the mailbox material you already have.
What size house numbers should I choose for street visibility?
For most residential streets, house numbers 4 to 6 inches tall are generally suitable for homes close to the road. Numbers 6 inches tall or taller are recommended for properties farther back from the road. For clear identification from a moving vehicle, emergency response standards in many areas require the numbers to be at least 4 inches high.
What are driveway markers used for?
Driveway markers show the edges of a driveway, path or lot so drivers and plow operators stay on the surface in snow and darkness. Their reflective strips catch headlights, which helps visitors find a rural entrance. The 200-pack suits farm lanes.
How far apart should I space driveway markers?
Space driveway markers about 25 to 30 ft apart on straight runs and 10 to 15 ft apart on curves, at the entrance and near ditches. Set them on both edges. A 100-pack of thick markers covers about 1,200 ft of straight driveway this way.
How tall should driveway markers be for snow plowing?
Pick markers that stand at least 1 to 2 ft above the deepest snow you expect, because plowing piles banks higher than the snowfall. 48 in markers suit most areas, while 72 in markers fit places where banks often top 3 ft.
How do I install driveway markers in hard or frozen ground?
Drill a pilot hole with the included 12 in steel drill bit, then push or tap the marker in with the protective cap on top. Install before the ground freezes when you can. The 500-pack ships with the cap, bit and gloves.
Are fiberglass driveway markers better than plastic or metal ones?
Fiberglass is usually the better choice because it flexes when a plow or car hits it and springs back, and it does not rust or conduct electricity. Plastic can crack in cold, and metal can bend. Every reflective driveway marker here uses fiberglass.
Can driveway markers protect my lawn and landscaping from snow plows?
Yes. Markers show the plow driver where the pavement ends, so the blade stays off grass, beds, curbs and sprinkler heads. Set them at the edge of the hard surface and closer together near gardens. The 0.31 in fiberglass markers resist bending.
When should I put in and take out driveway markers each season?
Put markers in during autumn, before the first hard frost locks the ground, and take them out in spring once the snow melts and the soil thaws. Pull them straight up, since the tip can loosen. These 48 in snow stakes can be reused.