VEVOR 6L Ultrasonic Cleaner with Heater Timer & Basket, Professional Digital Sonic Cavitation Machine, 180W Cleaning Machine for Watch Instruments, Glasses, Coin, Metal Parts, Tool

304 Stainless Steel Tank and Basket for Scratch-Free Durable Performance 

We chose 304 stainless steel for the inner tank because it is highly resistant to rust, wear, and heat during many cleaning cycles. The inside of the tank is 300x152x146mm, which is a good size for watches, instruments, eyeglasses, coins, metal parts, and small tools. It can handle items of different sizes without having to do them in separate runs. The tank's stainless steel design ensures it remains strong even when used with detergent solutions at high temperatures for extended periods.

The 304 stainless steel basket that comes with the tank keeps items off the tank bottom while the tank is being cleaned. This ensures all surfaces receive full cavitation exposure and prevents the tank walls from getting scratched. The portable handle design makes it easy to move the unit, and the drainage design makes it easy to empty the tank after each use. Because of these useful features, the machine is both easy to maintain and easy to use.

6L Digital Ultrasonic Cleaner with 40kHz Frequency for Deep Cavity Cleaning 

Standard cleaning tools work on the outside of an item. This 6L ultrasonic parts cleaner works differently — at 40kHz, the cleaning solution itself becomes active, generating high-frequency cavitation bubbles that travel into every crack, hole, and recessed area where grease, grime, oil, and particles accumulate. When these bubbles burst against submerged surfaces, they release powerful cleaning energy that physically dislodges contamination from places no brush or manual tool can access. 

The 40kHz frequency works for many different kinds of things, from delicate jewelry and lenses to coins, circuit boards, and complicated mechanical systems. There is no wear or chemical damage to the items, and after just one cycle, the items are cleaned. This makes the machine reliable for both professional cleaning tasks and everyday use at home, where getting consistent, scratch-free results is important.

180W Ultrasonic Power with 3 Transducers for 360° Surface Coverage 

With a total power of 180W, three ultrasonic transducers clean the interior of the 6L tank by evenly distributing cavitation energy throughout the space. This helps distribute cavitation energy evenly throughout the tank. Because it uses multiple transducers, it eliminates dead spots and ensures that everything in the tank receives the same treatment. The multi-transducer design helps provide consistent cleaning coverage throughout the tank. 

Its 180W output is perfectly balanced for the 6L tank size. It is strong enough to remove tough grease, wax, and oxidation from complex-shaped parts, yet gentle enough to protect fragile items like jewelry and optical parts. The noise level is set to ≦75dB, which means the unit can be used in shared professional spaces such as eyeglass shops, dental clinics, and watchmaking workshops without making excessive noise.

300W Heating Element with 0–110°C Range for Targeted Contaminant Removal 

The 300W heating element lets users precisely control the liquid temperature over a very large range, from 0°C to 110°C. When used on heavy industrial grease on car parts, the high-temperature mode speeds up breakdown. Lower temperature settings may be suitable for items that require gentler cleaning conditions. Heating and ultrasonic operation occur simultaneously, without waiting for preheating.

For professional use, the 6L digital ultrasonic cleaner can handle a wider temperature range than units limited to 80°C. You can set the temperature with the control knob, and it stays the same for the length of the cycle you choose. Higher temperatures make liquids less viscous, improve detergent performance, and speed up the breakdown of oil, wax, and organic residue. This means that faster, more thorough results are achieved each time, no matter what kind of contamination is being handled.

Knob Control Panel with 0–30 Min Timer for Simple Precise Operation 

The knob-based control panel makes it easy to set the temperature and cleaning time without complicated settings or digital setup steps. Users only need to set the desired temperature and the cleaning time (between 0 and 30 minutes). The machine will do the rest, turning off by itself when the cycle is over. This easy-to-use interface means both new and experienced workers can use the unit right away, with no learning curve.

The 1.5-meter power cord lets you place the unit on any workbench or tabletop without worrying about cable strain. The machine weighs 4.91 kg and measures 325 x 177 x 290 mm, making it small enough to fit on a desk. It has a 6L capacity, which is good for professional batch cleaning. The general design prioritizes user-friendliness; every part of the process, from the drainage connector to the portable handle, makes daily cleaning easier.

6L Digital Ultrasonic Cleaner Built for Lab, Automotive, and Home Use 

Many businesses and households trust this 6L digital ultrasonic cleaner because it carries the CE mark. In automotive and maintenance settings, it helps clean carburetors, metal parts, and electronic components before inspection or reassembly. It is suitable for cleaning instruments and precision tools used in labs and dental clinics. Optical shops and jewelry companies use it to clean glasses, rings, necklaces, and watches without abrasive contact. 

For people who use it at home, it is easy to use with coins, tableware, everyday items, and personal things. This VEVOR unit consistently cleans professional-grade items, whether used occasionally at home or in a commercial setting that processes many items per shift. It works on everything from expensive jewelry and instruments to complex industrial parts that need thorough, reliable degreasing every time.