VEVOR 10L Ultrasonic Cleaner with Heater Timer & Basket, Professional Digital Sonic Cavitation Machine, 240W Cleaning Machine for Lab Tools, Metal Parts, Carburetor, Brass, Auto Parts, Engine Parts

Lab Ultrasonic Cleaner with 40kHz Frequency for Deep Cavity Penetration

Lab environments demand a level of cleaning consistency that manual methods cannot deliver; residue left inside a threaded recess or blind hole on a precision instrument is not just a cleanliness issue; it is a reliability issue. This lab ultrasonic cleaner addresses that at the source. Running at 40kHz, it generates cavitation activity throughout the cleaning fluid that reaches directly into internal passages, narrow channels, and recessed geometry where contamination accumulates on automotive parts, sensitive electronics, and fine jewelry alike.

Along with clean surfaces, the result is guaranteed cleanliness that lasts through every wash. Surface tolerances, finishes, and structural soundness stay the same because the process does not touch anything. This unit cleans to a standard that lab researchers, mechanics, and professional technicians can rely on, without any extra work or mistakes.

304 Stainless Steel Tank and Basket for Scratch Free Durable Cleaning 

The 10L inner tank of the lab ultrasonic cleaner is made of 304 stainless steel, a corrosion-resistant alloy chosen for long-term use in wet environments. The inside of the tank is 296mm wide, 237mm deep, and 147mm high, so it can hold a wide range of items, from small jewelry pieces to larger carburetor systems and engine parts, without requiring multiple batching steps. The integrated tank design helps prevent leakage during cleaning sessions. 

The 304 stainless steel basket that comes with the machine keeps things off the tank floor while it is working, so the items and the tank coating do not wear down directly. The basket's shape helps protect delicate surfaces from wear and tear during cavitation. The unit's portable handle and easy-to-use drainage design make it easier to move and empty after use. 

240W Ultrasonic Power with 4 Transducers for 360° Cleaning Coverage 

240 W of ultrasonic power is generated by four piezoelectric actuators, which distribute the cavitation energy evenly across the 10 L tank. The multiple transducers distribute cavitation energy evenly throughout the tank, so items placed anywhere in it receive the same level of treatment intensity. The transducer array is optimized for 40kHz operation, helping maximize cleaning performance. 

The 240W power level is perfectly balanced for the 10L tank. It is strong enough to remove tough grease, oil residue, brass oxidation, and carbon deposits from auto and industrial parts, but not strong enough to damage lab tools or jewelry. Because the noise level stays at or below 75dB, the unit can be used in shared professional areas like workshops, clinics, and labs without being too loud.

300W Heating Element with 0 to 110°C Range for Targeted Contaminant Breakdown 

The 300W heating element can reach temperatures up to 110°C, which is much higher than the 80°C maximum of most ultrasonic cleaners. This wider range allows people to use high-temperature cleaning on heavily soiled industrial parts such as engine components, carburetors, and brass fittings, where tough carbon and grease deposits require high heat to break down. Heating and ultrasonic operation occur simultaneously, so there is no preheating delay.

For temperature-sensitive materials, the lower end of the range lets you heat them precisely and gently, protecting fragile items while still improving detergent performance and reducing liquid viscosity. The wide temperature range lets the unit handle both delicate and heavily contaminated items. This makes it very useful for both professional lab protocols and industrial maintenance tasks, where the types of contamination vary widely from one job to the next.

Knob Controlled 0–30 Minute Timer for Simple and Precise Cycle Management 

The easy-to-use knob control system lets users set the temperature and cleaning time quickly and accurately, without navigating digital options or complicated interfaces. An adjustable 0–30–minute timer lets operators choose cycle length based on item type and level of contamination. The simple knob controls make setup and operation quick and straightforward.

The 1.5-meter power line lets you place the unit on any workbench without worrying about how close an outlet is. The machine weighs 6 kg and measures 328 x 268 x 292 mm, making it small enough to fit on a desk while still featuring a 10L tank. The unit is good for both specialized lab benches and flexible multi-use workshop stations because it has easy-to-use controls, a long cord, and a small footprint.

Lab Ultrasonic Cleaner Suited for Industrial, Automotive, and Laboratory Use 

Many professionals trust this lab ultrasonic cleaner because it offers high power, a wide temperature range, and cleans without touching the surface. It cleans carburetors, engine parts, brass fittings, metal parts, and auto parts well in auto and repair shops, removing grease, oil, and carbon without damaging the parts or their assembly. When used in a lab, it works just as well with sensitive tools, lab utensils, and precise equipment.

The machine cleans jewelry, glasses, watches, circuit boards, dental equipment, and tableware just as well as it cleans industrial equipment. A professional mechanic, a lab researcher, a dental worker, or a homeowner who needs a reliable deep clean can use this VEVOR unit, and it consistently delivers professional-grade results. It is one of the most versatile 10L units at this price because it has a 40kHz frequency, 240W of power, and can heat up to 110°C.