Deals

VEVOR 22L Ultrasonic Cleaner with Heater Timer & Basket, Professional Digital Sonic Cavitation Machine, 480W Cleaning Machine for Lab Tools, Metal Parts, Carburetor, Brass, Auto Parts, Engine Parts

Ultrasonic Cleaner for Auto Parts with 40kHz Frequency for Deep Cavity Cleaning

An automotive workshop does not have time for partial cleaning. A carburetor reassembled with residue still inside a jet passage, or an injector with carbon still bonded to its tip, fails to perform, and often fails entirely. This ultrasonic cleaner for auto parts is built around that reality. At 40kHz, it drives cavitation energy through the cleaning solution and into every blind hole, internal channel, and threaded recess of the part being cleaned, stripping grease, carbon deposits, and particulate from geometry that no degreasing spray or brush can fully reach.

What separates ultrasonic cleaning from manual degreasing in an automotive context is simultaneity. Every surface of a submerged part: internal and external, simple and complex — is treated at the same time, in the same cycle, with the same cavitation intensity. There is no scrubbing one section while another stays dirty. The part goes in contaminated and comes out uniformly clean, ready for inspection or reassembly without additional manual work.

304 Stainless Steel Tank for Corrosion-Resistant Long-Term Durability 

The 500x300x150mm inner tank is made of 304 stainless steel, chosen for its high resistance to rust, corrosion, oil, and high temperatures over time. Repeated use of water-based cleaners and soaps at high temperatures will not break down this construction, so the tank will remain structurally sound throughout its useful life. The outside case and the basket that comes with it are both made of stainless steel, so they will last for a long time.

It is easy to fit big auto parts like carburetors, engine parts, brass fittings, and metal assemblies in the 22L interior; you do not even have to take them apart or batch them. During operation, the stainless steel basket that comes with it keeps items off the tank floor. This prevents the items and the tank lining from coming into direct contact and increases cavitation exposure across all surfaces.

480W Power with 8 Transducers for Uniform Cavitation Across the Full 22L Tank 

Ultrasonic output from eight piezoelectric sensors totals 480W, distributing cavitation energy evenly across the 22 L tank. With so many transducers, there are no dead spots where the cleaning power would drop. This means that items put anywhere in the tank will always get the same treatment. The transducer layout is optimized to deliver consistent cavitation throughout the entire tank volume. 

The 480W output allows this ultrasonic cleaner for auto parts to handle heavy contamination loads common in industrial and automotive cleaning, such as thick grease, carbon buildup, oxidation, and embedded particulate, without the need for long soak times or chemical pre-treatment. Reaching all surfaces of complex workpieces simultaneously, the multidirectional energy distribution reduces the need to reposition parts mid-cycle and keeps the process efficient for professional use with many parts.

0–110°C Heating Range with 600W Element for Accelerated Grease Breakdown 

The 600W heating element lets you adjust the temperature over a wide range, from 0°C to 110°C. This is much wider than the 0°C to 80°C range that most similar units cover. Higher temperatures make liquids less viscous, greatly speed up the action of detergents, and make it easier for heavy grease, wax, and organic layers to dissolve. As you clean, the lower settings protect delicate items like jewelry and electronics from damage. The higher temperature settings help loosen heavy grease, oil, and carbon deposits from automotive components. 

Heating and ultrasonic action occur simultaneously, so there is no need to wait for preheating. It has a 0–30-minute timer that keeps cycles controlled and repeatable, and the knob-based controls make changing parameters quick and straightforward without a complicated digital interface. This is helpful in workplace settings where speed and ease of use are important.

Knob-Controlled Timer and Temperature for Simple Cycle Management 

The knob-based control system lets you adjust the cleaning time and temperature directly, without going through a digital screen. Users can quickly set the cycle factors they want and start cleaning right away, which is helpful in busy professional settings where time efficiency is important. The easy-to-drain design lets you quickly empty the tank after each use without lifting or tilting the machine, and the portable handle makes it easy to move the machine around the workspace.

The unit measures 530 × 330 × 275 mm and weighs 10.35 kg, making it practical to move between workstations when needed. For shared or closed work areas, it is useful because the noise level stays at or below 75dB while it is running. Together, these useful design elements reduce friction during daily use, so the focus stays on cleaning output rather than machine management.

Ultrasonic Cleaner for Auto Parts Suited to Lab, Industrial, and Home Applications 

This VEVOR ultrasonic cleaner for auto parts works well in a variety of business and home settings. Industrial and automotive settings use it to thoroughly clean carburetors, engine parts, metal parts, brass fittings, and circuit boards before reassembling or inspecting them. It cleans dental equipment, precision instruments, and lab tools to the highest standards in medical and lab settings. For household use, it helps clean jewelry, eyeglasses, watches, and tableware without scratching their surfaces. 

The large 22L tank allows you to clean many items at once and multiple items per cycle. When used in a professional garage, a research facility, or around the house for regular deep cleaning, this unit consistently delivers professional-level results, thanks to its durable construction and powerful cleaning performance.