VEVOR 2721 kg Electric Chain Hoist, 9.1 m Lifting Height, Three-Phase Overhead Crane with 100 m Wireless & 8.2 m Wired Remote Control, Double G100 Chain Hoist for Factories, Warehouses, Garages

3 Phase Chain Hoist Rated for 6000 lbs with Dual-Chain Balance

This 3 phase chain hoist has a capacity of up to 6000 lbs / 2721 kg, with a dual-chain system that distributes the load evenly between both chains rather than placing the full weight on a single line. The balanced design makes a huge difference at this load capacity, where uneven weight distribution could create real instability when lifting heavy machinery, steel components, or industrial equipment.

This is a heavy piece of equipment at 304.2 lbs / 138 kg and 27.4 x 16.5 x 29.9 in / 695 x 420 x 760 mm. This is made for permanent or semi-permanent installation in factories, warehouses, or industrial garages, not for occasional home use. That size and weight correspond to the capacity for which this hoist is designed. It puts it well above lighter single-phase residential or small-shop hoists in both size and intended use.

380-415V Three-Phase Power Drives This 30 ft Lift Height

It runs on 380-415V three-phase 50Hz power, which is the kind of electrical infrastructure you would find in factories and industrial warehouses, not in a standard home or small workshop. That power requirement is important in planning installation, since three-phase service must already be available at the site where it will be used. But it also provides the sustained power needed to move heavier loads efficiently.

Lifting Height to 30 ft (9.1 m) A height range far beyond smaller single-phase hoists and perfect for warehouse ceilings, multi-story industrial areas, or applications requiring a lot of vertical clearance. This combination of three-phase power and the long lift height allows for jobs that smaller hoists just aren’t made for: operations handling large equipment, steel beams, or heavy machinery that needs to travel a fair vertical distance.

Dual-Speed Control at 10.8 ft/min Fast and 3.6 ft/min Slow

Two lifting speeds are available: 10.8 ft/min for rapid movement and 3.6 ft/min for slower, more controlled positioning. And that speed range is even more important at this load capacity than on lighter hoists, because precise control is more critical when maneuvering heavier loads into exact final positions, where even small misalignments carry greater risk.

The transition to slow speeds is smooth, allowing operators to quickly cover long vertical distances at high speed and then slow down for the final, more delicate positioning stage of a lift. It’s great to have the choice of both fast and slow speeds in a single hoist for industrial work such as installing large machinery, performing steel fabrication, or positioning heavy equipment with precision. Operations can be speedy yet maintain the control needed for careful final placement.

Double G100 Alloy Steel Chain with 360° Rotating Hook

This 3 phase chain hoist has a double G100 alloy steel chain setup, which is better suited to handle the continuous strain of heavy industrial loads without premature wear or stretch. Running double chains at this load level directly supports the dual-chain balancing system, as capacity increases, both strength and even load sharing become more important.

A forged hook that rotates 360 degrees freely allows heavy loads to be repositioned and angled as needed without having to detach and reattach the hook each time the orientation changes. For those industrial applications involving steel parts, machinery, or equipment that require precise angular positioning, this hook rotation, along with the double G100 chain, gives operators meaningful control over even the heaviest loads this hoist is rated to handle.

3 Phase Chain Hoist Wired and Wireless Remote Control Up to 328 ft

Operators can opt for a wired pendant for close-range work, or a wireless remote with a range of up to 328 ft / 100 m, bringing the control flexibility of lighter hoists in this product family to industrial use. The wired pendant is well-suited for applications where direct, hands-on control is required close to the load. At the same time, the wireless remote allows operators to move freely around larger areas of a warehouse or factory floor during a lift.

That wireless range matters much more in industrial settings where the operator may need to monitor a load from a distance across a large facility rather than standing right next to the hoist. For factories and warehouses where this hoist may be installed at considerable height or over a wide floor area, the genuine wireless range keeps the operator safe and fully in control of the lift.

IP55 Motor with F-Class Insulation for Industrial Daily Use

The motor that drives this hoist is rated IP55 for better protection from dust and water than the IP54 rating on the lighter single-phase hoists in this line-up. That increased protection is most important in industrial environments, where exposure to dust, debris, and moisture is often more predictable and more severe than in a typical garage or small shop.

F-class insulation enables dependable operation under sustained heat build-up during heavy, repeated lifting cycles, with a built-in cooling fan actively managing that heat throughout extended use. The aluminum housing helps resist corrosion while keeping the motor assembly as manageable as possible for the hoist's overall scale. For factories and warehouses where this 3 phase chain hoist is used daily, the combination of dust/water protection, heat resistance, and active cooling provides reliable operation in truly demanding industrial environments.