VEVOR 800Kg/1700Lbs Electric Trolley Hoist 1300W Electric Hoist Winch Double 12M/40Ft , Electric Hoist Electric Forklift Steel Pallet Holder Lever Garage Hoist

Electrical Wire Rope Hoist with Q235 Steel Trolley for Two-Axis Load Handling 

The most important thing about this VEVOR electric wire rope hoist is that it works with an electric trolley, allowing it to lift loads vertically and move horizontally along the beam simultaneously. Instead of lifting a load straight up from a fixed point, operators can use the remote to move the trolley smoothly along the beam.

We chose Q235 steel for the trolley's structure because it does not rust and remains rigid under sustained weight. At a speed of 42.7 ft/min (13 m/min), four strengthened wheels with sealed bearings move across the beam. This allows the trolley to move side to side smoothly, even when it is carrying 2200 lbs (1 metric ton). Sealed bearings keep upkeep needs low over a long period of time.

1700 lbs Dual-Line Capacity with Single and Double Cable Modes for Flexible Lifting 

This electrical wire rope hoist can lift to 1700 pounds (800 kg) in double-line mode at 20 feet per minute (6 meters per minute) and 880 pounds (400 kg) in single-line mode at 40 feet per minute (12 meters per minute). For each job, this two-mode system lets operators choose between speed and strength: single-line mode moves lighter loads quickly, while double-line mode provides the heaviest items with the extra mechanical advantage they need without putting too much stress on the cable or motor.

The cable can reach 40 feet (12 meters) in single-line mode and 20 feet (6 meters) in double-line mode, which means it can span most standard garage and industrial ceiling heights without any changes. The trolley has a rated load of 2200 pounds, which means the lateral travel system has headroom above the hoist's lifting rating. 

1300W Aluminum-Housed Motor with Radiator Fan for Continuous Low-Noise Operation 

An aluminum alloy frame surrounds the 1300W motor, protecting it from corrosion and passively dissipating heat across the motor body. The aluminum housing helps dissipate heat during operation. A large cooling fan adds active airflow to this passive cooling, preventing heat buildup that would otherwise cause the overheat safety to shut down the system mid-operation.

The aluminum housing also helps the motor run very quietly, which is a real benefit in workplaces where loud machines tire people and make it hard to talk to each other. Despite the 1300W output, the motor runs efficiently and quietly under normal load conditions, maintaining consistent torque delivery without the acoustic signature associated with heavier iron-housed alternatives. 

Anti-Rotate 5.1mm Galvanized Steel Cable with Mn-Steel Safety Hook 

The anti-rotate design of the 5.1 mm diameter galvanized steel wire rope prevents the cable from twisting under load. This anti-rotate design makes it easier to control and safer to use during every lift cycle, especially when working with heavy things that are hard to balance evenly on the hook.

Galvanization protects the wire from water, oil, and chemicals common in garages, warehouses, and building sites. This coating makes the cable last longer than uncoated steel cables. With a single-line length of 12 meters, the cable has sufficient reach for most standard installation heights in business and industrial buildings.

Limit Switch and Latch Hook Design for Multi-Layer Drop Protection 

This unit has two built-in safety systems to prevent the load from falling while idle. The upper-travel limit switch monitors the hook's position as it rises and automatically shuts off the motor when the hook reaches the highest safe point. This prevents overwinding, which could damage the cable drum or cause dangerous over-travel. 

The manganese steel hook has a built-in latch that prevents the lifting connection from coming loose when the trolley moves side to side or when the load shifts unexpectedly during the lift. Together, the limit switch and latching hook create a two-stage safety architecture that addresses the two most common failure points in hoist operation, cable overwinding and hook disengagement, within a single compact unit at an accessible price point. 

4-Button Wired Remote with Emergency Stop for Safe Directional Control 

The wired remote has four buttons that let you control the whole system from a single handheld unit: up, down, left (trolley traverse), and right (trolley traverse). This combined layout lets you handle both the vertical lift and the horizontal beam travel from a single controller, so you do not have to move your hand or switch between devices during a move. The 4.6-foot (1.4-meter) cable keeps the worker at a safe distance from the suspended load during the whole process.

An emergency stop button on the remote immediately stops the whole system, cutting power to both the hoist motor and the trolley drive at any point during a run. The emergency stop provides an additional safety measure during operation and is easy to reach thanks to the physical button design. 

Electrical Wire Rope Hoist Suited for Warehouses, Factories, and Construction Sites 

People use this electrical wire rope hoist with a trolley in places where a single-point ceiling hoist is not enough to get the job done. It moves palletized goods, bulk materials, and heavy parts along a beam span in stores and logistics operations without clogging floor-level equipment. It quickly moves machine parts, structural assemblies, and tools from one workstation to another in factories and other production sites. 

In addition to industrial settings, it works well in serious car shops for engine and gearbox work, as well as in home garages where major restoration or building projects require real lifting and positioning power. The beam width ranges from 3 to 4.3 inches (80 to 110 mm), which is wide enough to fit most standard I-beam and H-beam profiles used in residential and business construction.