VEVOR Macerator Pump, 350W, 6000 L/h Flow, 23 ft/7 m Head, Macerator Sewerage Sump Pump with 3 Water Inlets for Basement, Kitchen, Sink, Shower, Bathtub, Laundry Waste Water Disposal Upflush Machine

Upflush Pump for Sink with 350W Motor and 6000 L/h Flow

The upflush pump for sink use is driven by a 350 W copper motor with a maximum flow rate of 6000 L/h. That’s less output than bigger macerator units intended for toilet waste. Still, it’s just right for sinks, laundry hookups, and smaller fixture setups that don’t need the higher flow output of a full toilet macerator system.

The copper motor construction is smaller but still offers great performance and durability, and can handle the demands of washbasin and laundry wastewater without the premature wear that can be experienced with lower-quality motors operating under similar conditions. This upflush sink pump is ideal for a basement kitchenette, a laundry sink, or a small wet bar. It has sufficient flow capacity for standard daily use without requiring a larger, more powerful pump than the job needs.

23 ft Head Lift for Flexible Below-Grade Drainage

This pump lifts to a max head of 23 ft (7m) and collects and discharges wastewater from sinks and the like without the need for extensive renovation projects. It is that lift capability that allows the addition of a washbasin in a basement, laundry room, or other below-grade space where a traditional gravity-fed drain line isn’t available.

This head-lift figure is often the make-or-break factor in whether a washbasin addition is even feasible in a given layout. An upflush pump designed for sink use that lacks sufficient lift capacity will not perform well in deeper basements or on longer runs to the main drain line. Having 23 ft available here allows for most common sink and laundry installation scenarios without the need to purchase a larger, more expensive pump.

90°C Hot Water Tolerance for Durable Motor Protection

The motor is oil-injected to withstand constant immersion in 75°C water or short periods at up to 90°C for up to 4 hours. That heat tolerance is important, as hot water from a kitchen sink, laundry sink, or washing machine regularly flows through the system with little regard for its actual temperature at the point of discharge.

Many smaller comparable pumps are not rated for water at this temperature for extended periods, which can lead to premature wear or failure as the internal seals break down. This upflush pump is designed for washbasin installations. It can withstand that kind of heat exposure time and time again, giving it a much better working life in homes that regularly run hot water through the sinks or laundry fixtures connected to it.

Silver Ion Tank with 99% Odor Inhibition Rate

The pump features a dedicated silver-ion tank that can inhibit odor buildup by up to 99%, helping prevent the common odor complaints associated with lower-quality macerating systems after prolonged use. That antimicrobial quality keeps the unit running clean, without the need for regular manual maintenance to control odor.

It’s a low-maintenance feature, since the silver ion tank doesn’t require periodic cleaning cycles or treatments and passively controls odors during normal operation. An upflush pump for sink use, hidden away in a laundry room or basement utility closet, with no need to regularly think about odor control, is a real convenience over the life of the unit, especially in a space that doesn’t get checked often.

Quiet Operation with Built-In Check Valve Sealing

Four rubber pads help reduce operational noise, which is important for this upflush pump in sink applications because it is often installed closer to living spaces than a basement toilet pump would be, such as near a laundry room next to bedrooms. That quieter operation helps prevent disturbances to sleep or daily life in nearby rooms.

The integrated check valve prevents backflow of liquid without the need for a separate external valve, simplifying installation and reducing potential failure points. The latest seal design also enhances the overall sealing performance, enabling the unit to be used reliably without leaks developing around connection points after months of regular washbasin and laundry use.

11.5 lbs Upflush Pump for Sink in Compact Spaces

The most compact unit in the macerator product line, at 11.5 lbs and measuring approximately 11.8 x 6.5 x 7.1 inches, this is especially well suited for tight spaces like under-sink cabinets, small laundry closets, or shallow utility areas where larger macerator pumps wouldn’t fit. That smaller footprint is a real advantage for sink-specific installations, where space is often more limited than in a full bathroom setup.

Designed to withstand constant exposure to water and moisture without degradation over time, the unit has an IP68 ingress protection rating and Class B insulation, despite its smaller size. Offering a truly compact, purpose-built solution for homeowners wanting to add a sink, laundry connection, or small wet bar in an area without existing drain access, this upflush pump for sink use is not an overgrown toilet pump reconfigured for a smaller job.