VEVOR 2-in-1 Electric Hoist Winch, 500 kg Capacity, 1500W Portable Power Winch Crane, 7.6 m Lifting Height, 5 m/min with Manual and Wireless Remote Control for Factory, Warehouss, Garage

500 kg Load Capacity and 25 ft Reach Handles Real Lifting Jobs with Ease

There are plenty of lifting jobs around a garage, workshop, or warehouse that are just too heavy and difficult to tackle by hand – and this machine is made for such scenarios. It can handle engines, large equipment parts, steel materials, large furniture pieces, and similar loads with minimal strain, with a rated load capacity of 500 kg (1,100 lbs). The 25 ft (7.6 m) lift height provides enough vertical reach to operate across numerous floor levels, high shelving systems, or raised loading points in most conventional buildings.

This amount of capacity is a good practical compromise for light commercial or semi-professional use. It’s got plenty of power to lift truly big loads. Still, it is built and priced for individual operators, small workshops, and tradespeople who need a reliable hoist without the expense of fixed overhead equipment. This portable power winch gets the job done without complicating the process.

Portable Power Winch with 1500W Forced-Fan Cooled Motor for All-Day Performance

Built to run under load for long periods of time, this unit’s 1500W motor doesn’t lose power as many electric hoists do during hectic work sessions. Larger carbon brushes improve contact within the motor, minimize electrical resistance, and allow the motor to run more effectively under prolonged load. That internal enhancement helps provide more consistent torque output on the first lift of the day or the fifteenth.

This performance is maintained over time with forced-fan cooling. The built-in fan actively draws heat away from the motor while it is running, rather than allowing it to dissipate naturally between uses. This means the portable power winch can perform back-to-back lifts without cool-down pauses that slow down workflow. If you run a busy service bay, loading dock, or construction site with a regular stream of lifting operations, that cooling system is a handy feature that makes a big impact in real-world use.

2-in-1 Control with Manual Handle and 200 ft Wireless Remote for Solo Operation

This unit has two operating modes, depending on the job. The unit’s manual handle buttons offer direct, hands-on control for lifts where you’re near the machine and the load. The 200-foot wireless remote dramatically expands your range of operation, allowing you to operate the hoist remotely - a handy feature whether you need to direct cargo into position from below, coordinate work from another floor, or operate the lift while keeping both hands closer to whatever you’re moving.

The 200 ft wireless range is very handy for solitary operators who would normally need a second person to operate the controls while handling the load. The remote can be operated by a single person who can monitor the load and make real-time adjustments without help. The 2-in-1 design makes it simple. No mode to worry about or hide away, simply two clear controls to deal with the most typical operational scenarios without any added complexity.

Electronic and Mechanical Dual-Brake System with Limit Switch for Safe Lifting

Knowing the load will stay exactly where you set it gives lifting confidence. This machine features a dual braking system, electronic and mechanical, working together to halt and retain the load without drift or creep after each shift. The dual-brake design means stopping power does not rely on a single system; both brakes operate together to provide a controlled, stable stop each time the operator releases the control.

That limit switch is an important automatic layer of the safety setup. It detects cable travel and stops power to the motor the instant the hook hits the top of its range, avoiding over-winding that could break the cable or cause the load to drop. The 360° latch hook ensures the load stays connected during the lift, even if it moves or swings slightly. If there is a loss of electricity, the motor shuts down promptly, and the brakes hold the load in place until power is restored.

Portable Power Winch with Galvanized Steel Wire Rope Built to Resist Kinks and Corrosion

A hoist’s wire rope experiences an immense amount of stress over its operational life. Repeated tension, contact with surfaces, exposure to moisture, and continuous spooling and unspooling all deteriorate a normal cable over time. The galvanized steel wire rope included with this portable power winch is coated to resist corrosion and surface damage that causes fraying.

The rope construction is designed to resist kinking and twisting under pressure and corrosion exposure. A kinked cable will weaken at the kink point and become unpredictable and dangerous – this rope is designed to lie gently on the drum and unspool cleanly without bunching. A rope that maintains its shape and integrity through repeated use is a basic component for keeping the system running safely and reliably in the long term.

Lightweight 9.7 kg Frame at 9.1 x 7.9 x 8.7 in for Easy Transport and Setup

This machine is relatively easy to transport, store, and move around, weighing 9.7 kg (21.4 lbs) and measuring just 9.1 x 7.9 x 8.7 inches, compared to fixed hoist systems or heavier portable options. Its compact size means it can be stored in a tool bag, the back of a truck, or on a shelf in a storage area without taking up valuable space that could be used for other equipment. That portability is a genuine working advantage for artisans and contractors who move from project to project.

No complicated installation is required to get started; it can be fastened to a beam, trolley, or overhead structure with ordinary rigging hardware and is ready to go in minutes, with no permanent fixtures or expert installation required before first use. With minimal weight, a tiny footprint, and simple mounting, this portable power winch goes from storage to operation quickly, which is important when job time is limited and set-up needs to happen fast.