VEVOR Low Profile Floor Jack, 3 Ton Capacity, Steel Racing Floor Jack with Dual Pistons Quick Lift Pump, Hydraulic Trolley Car Lift for Sports Cars, Sedans, SUVs, Pickups, Lifting Range 75-500 mm

3 Ton Low Profile Floor Jack with Telescopic Support Rod for Height-Lock Safety 

The standout feature that separates this 3 ton low profile floor jack from standard alternatives is the included telescopic support rod. After lifting the car, the rod extends and locks the jack in one of eight positions, ranging from 295 to 470 mm (11.6 to 18.5 in), acting as a built-in jack stand. The mechanical lock helps support the selected height independently of hydraulic pressure. 

The support rod gives you extra safety when working on things like the brakes, exhaust, or suspension, which a jack-only unit can't. The telescoping design of the rod keeps it small when not in use, and the eight adjustment settings make it easy to control the height on a variety of vehicles. It is an important safety feature that adds an extra level of support during longer maintenance jobs. 

75–500 mm Lift Range That Clears Sports Cars and Reaches Full SUV Height 

The minimum saddle height of 75 mm lets the 3 ton low profile floor jack slide smoothly under sports cars and low-clearance vehicles with body kits. The 75 mm minimum height makes it suitable for many low-clearance vehicles. At the highest point, 500 mm of clearance allows access to the drivetrain and suspension of taller SUVs and trucks.

The 425 mm total span allows a single unit to work with many different types of vehicles. It can handle both a sports car that needs 75 mm of entry and a pickup truck that needs 450 mm of lift without any adjustments other than pumping to height. This wide lifting range allows one jack to serve different vehicle types.

Dual Piston Hydraulic Pump with Sealed System for Stable, Leak-Resistant Lifting 

The dual-piston pump moves fluid through two cylinders simultaneously, so it can deliver more fluid per stroke than a single-piston system. Because the jack can reach working height faster with fewer handle strokes, it takes less time to set up for everyday tasks. The dual-piston design helps deliver faster lifting performance. 

The sealed hydraulic system maintains steady pressure over extended use and reduces oil leakage. If a jack can reliably hold hydraulic pressure between uses, it needs fewer fluid checks and works the same way every time, without the gradual softening that happens with worn seals. 

6,614 lbs Capacity Covering Sedans, SUVs, Pickups, and Sports Cars 

The 3-ton capacity is suitable for many sedans, SUVs, pickups, and sports cars within the jack's rated load limit. Under load, the heavy-duty steel frame stays rigid, with minimal horizontal flex or saddle deflection at the connection point.

The jack will last longer if you use it well below its rated maximum. When a 3-ton jack lifts a 2-ton car, it stays well within its working range. This helps keep the seals and frame from wearing out over time. This ability enables work such as brake service, suspension maintenance, exhaust replacement, and tire changes, all without pushing the hydraulic system to its limits.

Reinforced Caster Wheels That Roll Smoothly Without Loosening Over Time 

The caster connections on this jack are reinforced to resist loosening, which standard wheel attachments experience with repeated use on hard floor surfaces. Each time the caster is moved, it puts horizontal stress on the mounting. Standard connections gradually loosen, causing a wobble that makes it difficult to control the direction. The reinforced attachment keeps the wheels aligned and rolling smoothly over time without having to be tightened every so often.

Two swivel wheels on the back of the jack let it move easily as it approaches. This feature lets the operator move the unit into place with just one move. Two front wheels that stay in place keep the vehicle tracking straight ahead. Both types of wheels work on garage concrete and outdoor asphalt, and the extended handle lets you control the unit's direction from a standing position, so you do not have to bend down to steer it by hand.

Heavy-Duty High-Strength Frame That Reduces Wobble and Sinking Under Load 

The 3 ton low profile floor jack uses a high-strength steel frame that helps maintain structural rigidity under load. Because it is rigid, the vehicle remains upright during the lift and does not shift sideways as the height increases. This is an important stability feature when lifting close to the edges of the vehicle's undercarriage.

Some hydraulic jacks may gradually lose height under load over time. This can happen because the seals are not good enough or the frame bends under pressure. The sealed hydraulic system and solid frame construction help protect against both problems, keeping the vehicle at the same height throughout the work period. For tasks that need the exact placement of parts during reassembly, a jack that stays at the same height eliminates a key variable.

3 Ton Low Profile Floor Jack with Extended Handle for Controlled Operation 

The handle on this 3 ton low profile floor jack is sized for mechanical leverage rather than minimum length. You can do full pump strokes while standing without bending too far, and the leverage ratio makes it easy to handle even when lifting heavy vehicles near the top of the rated range.

To lower the vehicle, turn the handle anticlockwise to open the release valve slowly. The rate of descent matches the valve opening, so you have precise control over how quickly the vehicle returns to the ground. The unit fits in a standard garage bay because it weighs 35.1 kg and has a footprint of 680 × 340 mm. The overall 1,280 mm standing height keeps the handle at a natural working angle throughout the pump stroke.