VEVOR 1000 kg Electric Chain Hoist, 3 m Lifting Height, 230V Single Phase Overhead Crane with 100 m Wireless & 2.4 m Wired Remote Control, Power Electric Hoist for Factories, Warehouses, Garages

Single Phase Hoist Rated for 2200 lbs with Dual-Chain Balance

The single phase hoist can lift to 2200 lbs / 1000 kg with a dual-chain system that distributes the load evenly across both chains, rather than a single chain bearing the full weight. That balanced design is critical to stability in a lift, especially when handling heavier or more awkwardly shaped loads, where uneven weight distribution could otherwise cause shifting or swaying.

This hoist is perfect for garages, smaller workshops, and warehouse environments that don’t have three-phase electrical service and run on standard AC 230V, 50/60 Hz single-phase power. Despite the hefty load rating, the unit’s light, compact size – 53.1 lbs / 24.1 kg, with overall dimensions of 20.7 x 6.7 x 10.6 in / 525 x 170 x 270 mm – makes installation and positioning easier.

Dual-Speed Control at 13.2 ft/min Fast and 6.6 ft/min Slow

It is a single phase hoist with two separate lifting speeds: 13.2 ft/min for fast lifts and 6.6 ft/min for slower, more precise positioning. The two-speed design allows operators to move quickly when raising or lowering a load over a long distance, then switch to the slower setting for fine positioning, such as setting an engine in place or aligning steel components precisely.

The seamless speed change means you don’t have to stop and reconfigure the hoist mid-task. You can go from fast movement to precise positioning without losing efficiency. If your job includes both bulk lifting and fine final placement, such as installing parts or aligning heavy equipment, having both speed options built into one hoist means you don't have to compromise between lifting speed and precision control.

Single Phase Hoist G100 Alloy Steel Chain with 360° Rotating Forged Hook

The hoist features a G100 alloy steel chain, a higher-quality product intended for greater strength and reliability for long-term, heavy-duty use. The chain class is important for handling the repetitive, heavy-duty lifting this hoist is rated for. Lower-class chains would wear out or stretch more quickly under the same working conditions.

The forged hook rotates 360 degrees, allowing loads to be placed and angled freely without having to detach and reattach the hook. Not only does this hook rotation, combined with the dual-chain load-balancing system, give operators exceptional flexibility when positioning engines, steel components, or other awkwardly shaped loads into tight spots. This single phase hoist is designed to handle demanding lifting tasks without sacrificing control, providing the best of both worlds with chain grade and hook design.

Wired and Wireless Remote Control Up to 328 ft

Operators can opt for a wired pendant for close-range work or a wireless remote with a range of up to 328 ft / 100 m, providing flexibility for the specific task. The wired pendant is for when being close to the load and having direct tactile control is of primary importance; the wireless remote lets you operate at your leisure, away from the load or in a different position.

That combination of wired and wireless control is a key feature in many work environments, from cramped garage spaces where a wired pendant feels more natural to larger warehouse or factory settings where wireless range allows the operator to move freely during a lift. If you work in a variety of settings or on different kinds of tasks, having both control options integrated into a single hoist means you don’t have to decide on just one control method up front.

Upper and Lower Limit Switches with Auto Braking Protection

The upper and lower limit switches automatically stop the motor when the hook reaches either end of its lifting range. This prevents the chain from being over-extended and the hoist housing from being damaged by repeated manual oversight. This automatic shutoff is especially useful for repetitive lifting jobs, where it is easy to lose track of the chain position on each cycle.

If power is cut, whether a shutoff or an outage, auto braking kicks in immediately and holds the load tight to the load cell, not letting it fall away. Then there is the emergency stop, which is another type of direct control that allows operators to stop the lift instantly if anything goes wrong during a job. Together, these three protections provide this single phase hoist with several independent layers of safety during operation.

IP54 Motor with F-Class Insulation for Reliable Daily Use

The motor that powers this hoist has an IP54 rating. This means that the motor is protected from dust and splashing water. This is especially relevant to hoists that may be used in a garage, warehouse, or factory floor setting, where exposure to dust and moisture is common. This protection ensures the motor can continue to perform consistently over time and not degrade due to environmental exposure.

The built-in cooling fan helps manage heat buildup, and the F-class insulation ensures reliable operation under sustained heat from repeated lifting cycles. The build is capped with a corrosion-resistant aluminum housing that helps keep the unit lightweight despite its lifting capacity. The dust/water protection, heat tolerance, and active cooling combined ensure reliable performance, lift after lift, for daily use in factories, warehouses, and garages.