Back To School

Deals

VEVOR 130Amp Spool Gun with 3m Cable, Replacement for Lincoln Magnum 100SG K2532-1 - with 11PCS Mig Welding Contact Tips, ER4043 0.9mm Aluminum Mig Welding Wire & Toolbox

130A Rated Pure Copper Cable for High Conductivity and Heat Resistance

The AC power for the VEVOR aluminum MIG spool gun is 130A, and the wire inside is 10 feet of pure copper. Pure copper is a much better conductor of electricity than aluminum or mixed-alloy options. It means that the arc will stay stable and steady while it is working. Every time a welder works on aluminum panels, frames, or structural parts, the bead formation is better, and spatter is reduced.

The 10-foot cable length lets workers reach the welder without straining or moving it around much. The wire insulation's built-in heat resistance prevents it from breaking down during long welding sessions. The aluminum MIG spool gun is a reliable tool for both home and professional use because it is long, conducts electricity well, and does not get too hot or cold.

Lincoln Magnum 100SG K2532-1 Compatibility for Direct Drop-In Replacement

You can directly swap out the Lincoln Magnum 100SG K2532-1 gun for the VEVOR metal MIG spool gun. The Lincoln Easy MIG 140 and Easy MIG 180 welders are fully compatible, so operators can switch the gun without re-wiring, adjusting, or changing their current setup. Replacing is easy and does not require any special tools or technical know-how.

Through OEM channels, finding new guns that work with Lincoln machines can be hard and expensive. The VEVOR spool gun fills that gap by providing a compatible fit at a more affordable cost. With a proven drop-in fit, welders who depend on Lincoln Easy MIG machines can get back to full work quickly.

Aluminum MIG Spool Gun with Double V-Groove Drive Roll for Consistent and Smooth Wire Feeding

Reliable wire feeding is important for good welds, and the aluminum MIG spool gun comes with a double-V-groove drive roll for aluminum wire 0.030" to 0.035" in diameter. Aluminum wire fits tightly into the smooth groove because it does not crush or deform the softer material, unlike knurled rolls. Keeping the feeding pressure steady reduces the risk of the wire slipping or stuttering, or of birds nesting inside the gun body.

As an extra choice for different wire and application needs, the package comes with a second drive roll, a 0.030"–0.035" dual V-groove roll with light knurling. Welders can adjust the wire feed based on wire thickness or material type if they have both rolls on hand. Users have more options for a bigger range of aluminum welding projects with the dual-roll system.

Aluminum MIG Spool Gun with 11-Piece Contact Tip Set for Extended Runtime

Wearing out or clogging contact tips slows down work, especially when welding for long periods. The metal MIG spool gun solves this issue by coming with a large set of contact tips. The gun comes with one 0.030" tip already installed, as well as five more 0.030" tips and five 0.035" tips. With eleven tips, welders do not have to stop in the middle of a job to find replacements.

Having 0.030" and 0.035" sizes on hand makes it easy to work with wires of different widths without having to buy separate sizes. The pre-installed tip lets you use it right away, without opening the box. The full set of tips keeps the workflow smooth from start to finish, whether in a fabrication shop, a car body shop, or a do-it-yourself aluminum build.

ER4043 0.035" Aluminum Welding Wire Included for Immediate Use

Each VEVOR aluminum MIG spool gun comes with one roll of ER4043 0.035" aluminum welding wire, so users do not have to make a separate supply run to start welding. ER4043 is an aluminum filler alloy because it flows well, does not crack easily, and works with many base aluminum alloys, such as 6061 and 6063. The 0.035" width works well with the drive rolls that come with it to make feeding smooth and reliable.

Because it does not rust and makes clean welds with few holes, ER4043 wire is good for use in automobile, marine, structural, and general fabrication work. The included wire provides new users with a tested, suitable starting point, and it saves experienced welders the trouble of choosing and sourcing their own filler material.

Transparent Housing for Real-Time Wire Visibility and Jam Prevention

Inside the spool gun body is a clear housing panel that lets users see the wire spool clearly at all times while the gun is in use. If you know exactly how much wire is left on the spool, you can reload it before it runs out in the middle of a weld. This helps prevent incomplete welds and stops material from being lost. Keeping an eye on things visually also makes it easier to spot early signs of bird nesting or tangling before they get really bad.

Because aluminum wire is softer than steel wire, it is more likely to have feeding problems. This makes early discovery even more important. With the clear design, you do not have to guess as you do with dark housings, and you can keep welding for longer periods of time without stopping. When operators know they can always see the wire path, they feel more in control and confident.

Compact Toolbox Included for Organized and Portable Storage

The VEVOR aluminum MIG spool gun comes with a toolbox specifically designed to hold the gun, cable, contact tips, wire, and drive rolls in one neat place. Keeping all the parts together keeps you from losing tips, getting wires tangled, and wasting time looking for parts before you start a job. The toolbox is small enough that it will not take up much space on a desk shelf or when you carry it to the job site.

Mobile welders, workers, and operators who go from place to place will find portable storage very useful. During travel, a special case keeps the spool gun parts safe from dust, water, and physical damage. Besides the welding tools themselves, the toolbox that comes with them is useful and durable.